Vibratory finishing machine

ERBA ESA 15 Prozesswasser-Zentrifuge

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Bodpfx Asg Rxhgja Eewi

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: Bjdpevazz Dofx Aa Ejwi - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm - Motorized dust extraction - Infinitely variable disc speed - 800 - 2200 rpm - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm - Weight approx. 250 kg

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Bwedot Tqy Espfx Aa Eji Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: good (used), Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter Bodpeb A Ngpofx Aa Eowi -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Condition: reconditioned (used), Year of construction: 2021, Belt Grinding Machine Manufacturer: REMA Model: BS 75 Column-type Design Year of Manufacture: 2021 – workshop-tested Description: - Flat grinding table usable both horizontally and vertically - Extremely robust and durable machine construction - High-quality components designed for continuous industrial operation - High safety standards with CE certification - Numerous customization options - Simple and quick belt change Technical data: - Belt dimension: 950 x 100 mm - Motor power: 0.55/0.7 kW - Motor speed: 1,450/2,900 rpm Bwedpfx Aajxy Rfho Eei - Cutting speed: 8/16 m/s - Worktable size: 225 x 120 mm - Mitre table size: 110 x 120 mm - Belt guard housing made of steel - Extraction port Ø 75 mm - Dimensions: 380 x 410 x H 1,209 mm - Weight: 70 kg Used as seen, without warranty. The machine is technically in line with the standards of its year of manufacture.

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Bwsdpfx Asgkwckja Eoi

Condition: repair required (used), functionality: not functional, total width: 1,300 mm, total length: 1,700 mm, total height: 2,150 mm, overall weight: 600 kg, rotational speed (max.): 2,880 rpm, Greif belt grinder – intended for polishing and grinding. The machine requires a control/electrics upgrade – motors are operational. No documentation – no CE marking Spindle width: 150 mm Ø Spindle diameter: 35 mm Dimensions for transport: 1700 mm x 1300 mm x 2150 mm (L x W x H) [on pallet] Weight: 600 kg Complete set of spindle clamps Missing spacers for mounting the contact wheel Bjdowq Dntopfx Aa Ejwi Contact wheel 1 [450 mm diameter, 45 mm wheel thickness, SH65 wheel hardness, 35 mm bore] Contact wheel 2 [450 mm diameter, 30 mm wheel thickness, SH65 wheel hardness, 35 mm bore] The machine is currently set up for a 3500 mm belt – adjustable. Two covers for operation with endless belts.

Condition: used, Year of construction: 2014, input voltage: 400 V, overall weight: 3,000 kg, input current: 71 A, We offer this used Boere Polishing Machine 500-3 polishing/sanding machine, year of manufacture 2014. Type: POLISHING / BRUSH SANDER Model: POLIJSTMACHINE 500-3 Serial number: 14047112 Bodsybb Uwopfx Aa Eewi Year of manufacture: 2014 Voltage: 400 V Frequency: 50 Hz Rated current: 71 A Rated power: 36 kW Weight (approx.): 3,000 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 153, functionality: fully functional, operating hours: 100 h, Wide belt grinding machine for grinding steel sheets. Working width 1300 mm Working height from 0.5 to 160 mm Max. material deflection 0.3 mm/m Steel brush diameter 200 / 300 mm Felt brush diameter 200 / 300 mm Grinding wheel diameter 150 mm Number of grinding wheels 12 Grinding belt length 1900 / 2200 mm Grinding belt speed 18 m/sec Disc rotation speed 12 m/sec Bwsdpfxsylbi As Aa Eoi Rated voltage 400V Motor power 15 kW Air requirement 6 bar Air consumption 20 - 1100 NL/min Extraction pipe diameter 2 x 150 mm Noise level 96 dB Dimensions L x W x H: 1600 x 1900 x 2200 mm Weight 1800 kg (with (two units)

Condition: new, FILTER SYSTEM DE-40 400V Bwsdpfjg Rbznsx Aa Eji Technical Specification: Speed: 2850 Power supply: 400V / 50Hz (optional) Fan power: 4.0 kW Air flow: 5300 m3/h Inside size (L x H x W in mm): 1140x2250x730 Weight in kg: 191 kg THE OFFER INCLUDES: Filter unit DE-40 400V (optional) CE declaration of conformity 24 months warranty for consumers 24 months warranty for contractors Professional service after warranty