Sandblasting machine for stone slabs

Breton

Condition: used, Year of construction: 1996, machine/vehicle number: -, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, input current: 120 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 400 mm, workpiece width (max.): 2,000 mm, number of axes: 3, overall weight: 35,000 kg, year of last overhaul: 2024, Hello, I have for sale a granite slab polishing line by Breton, as shown in the photos. The line is equipped with 17 heads and is fully operational following a complete overhaul, featuring a new belt, new software, four tables, and a slab dryer at the exit table. Upon purchase, we will demonstrate the machine in operation. We offer the machine with pre-set processing parameters and expertise for achieving a perfect polish, along with access to a proven service team that handled its overhaul. The machine is ready to start work immediately after installation. For any questions, please contact me by phone or email. Pedpfjy Ewnisx Ahyogk

Year of construction: 2026, condition: new, -Drum diameter 1600mm Psdpfxeq T Sp Hj Ahyjgk -Drum length 2880-3880-4880mm -Working length 2000-3000-4000mm -Grid holes according to your specifications -The screen consists of a closed profile -A cleaning brush with a diameter of 300 mm is mounted on the screen and along the entire length of the working part -Flat bar blades installed in the center of the drum allow the material to be poured -Drum rotation speed approx. 11.5 rpm - Sieve feed sieve via gearmotor- Drum transmission via gearmotor + 2 rubber drive wheels diameter 230 mm - Sieve equipped with electrical panel - Gravity feed hopper, dimensions Width 1600 mm, Length 1400 mm, Height 1200 mm - 12 months warranty - Made in Europe - CE compliant

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, total width: 4,300 mm, spindle speed (max.): 24,000 rpm, total height: 4,789 mm, table load: 10,000 kg, overall weight: 30,000 kg, spindle motor power: 45,000 W, controller manufacturer: HEIDENHAIN, controller model: k25, product length (max.): 4,280 mm, number of axes: 3, This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details. Pgedpfsy Amd Ijx Ahyek • Table dimensions (X/Y): 2000 x 3000 mm • Rapid traverse (X/Y/Z): 40 / 40 / 20 m/min • Power: 45 / 20 kW

Year of construction: 2013, condition: used, functionality: fully functional, Opportunity! Breton Combi Cut, built in 2013, with shuttle table and waterjet unit including KMT pump: Available at short notice, fully functional, and can be inspected under power. Assembly and disassembly by factory technicians possible. Shuttle table Pedpfxewfqrus Ahyegk Tilt table The weapon for ceramics and natural stone See attached order confirmation.

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Pgedpora Dddjfx Ahyek Cycle time: approx. 45–47 s Construction features: - Large loading opening for cardboard - Possibility of automatic feeding (e.g., via conveyor) - Manual wire tying (4 wires) - Pallet lock and hydraulic doors for bale removal Advantages of this press: - Large bales – fewer transports - High pressing force - Designed for continuous operation Available production years: 2016–2020

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 600 mm, total height: 4,300 mm, overall weight: 28,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 20,000 W, tool weight: 15,000 g, product length (max.): 4,798 mm, number of axes: 5, This 5-axis Breton Matrix k16 was manufactured in 2002. It features a working area of 2000 × 1600 × 800 mm with vertical spindle and a tool magazine with a 30-position capacity. The machine offers rapid traverse rates up to 40 m/min and a maximum spindle speed of 24,000 rpm. If you are looking to get high-quality milling capabilities, consider the Breton Matrix k16 machine we have for sale. Contact us for more information. Pjdsyf Iiiepfx Ahysgk • Working area: • With vertical spindle (Y / X / Z): 2000 × 1600 × 800 mm • With horizontal spindle (Y / X / Z): 1600 × 1200 × 800 mm • Axis travels: • C: 0° – 360° continuous • A: ±105° • Speeds: • Rapid traverse X/Y: 40 m/min • Rapid traverse Z: 20 m/min • C axis: 19.5 rpm • A axis: 12 rpm • Acceleration X/Y/Z: 2.5 m/s² • Spindle (electrospindle): • Tool holder: HSK A63 / E63 • Max torque: 38 Nm • Max speed: up to 24,000 rpm • Tool magazine: • Capacity: 30 positions • Max tool diameter: 140 mm • Max tool length: • 200 mm (Ø 140 mm) • 300 mm (Ø 90 mm) • Max tool weight: • 15 kg at 16,000 rpm • 12 kg at 24,000 rpm

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 33551/2007, input voltage: 400 V, table width: 2,200 mm, table length: 3,700 mm, input frequency: 50 Hz, The machine has a new spindle installed in January 2026. Available for relocation May 2026 Pgjdpfxsym Svvs Ahyek

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke Pjdpfx Ahoihf R Ueyogk HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. Pgjdpfsrpi E Ajx Ahyek The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool.

Year of construction: 2010, condition: used, Levibreton KGP is a calibrating machine for levelling strips and tiles, which move on a conveyor belt, using a series of diamond tools. Podpfjvun T Ajx Ahysgk

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Pgedpfedrtalex Ahysk Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. The machine needs to be adapted for different voltages and frequency. The machine is not available for North America. Pedpfx Astwww Hehyegk

Condition: used, functionality: fully functional, GRINDING PLANT capacity 1 t/h with roll press, sieving in 3 granulometries with nutation screen and horizontal screens. Input: inlet grain size < 10 mm (marble, granite and quartz) with loading by big-bags on the included hopper. Output: 3 grain sizes (0-50, 50-100 and 100-300 microns). 70% of 100-300 microns, 15% of 50-100 and Pgjdpfxjx Agxvo Ahysk 15% of 0-50 microns. Storage with propulsion system for sending to silos (silos not included)

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers Pgedpfx Ahjb A Ii Ssysk -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: new, functionality: fully functional, workpiece length (max.): 3,800 mm, workpiece width (max.): 2,400 mm, blade diameter: 1,000 mm, Breton SpeedX is the advanced cnc bridge saw for high thickness slabs or pieces in marble or granite to create kitchen tops, vanity tops, shower trays and claddings Pgedpfx Aexdihvshyek