Used Asg 30 for sale (55,653)

Condition: new, Year of construction: 2022, Fan new, year of manufacture 2022 Motor power 15 kW Hsdpfow I U Ttjx Ah Njfb Volume flow 7783 m³/h Fan position GL 270 Total pressure increase 3502 Pa Connection 350 mm With star/delta starting and volt-free contact for start/stop: with Nestromat 15 kW star/delta control, control cabinet IP54 installed, including main switch. The control cabinet is prepared for the installation of further necessary control components as required by the overall system control; spare slots are available if needed. Technical data: • Three-phase network: 400 V • Maximum drive power: 15.0 kW - Y/Δ connection • Network frequency: 50 Hz • Ambient temperature: -15 to +40 °C • Control cabinet protection rating: IP 55 or 54 depending on version • Control cabinet: RAL 7032, powder-coated Weight 328 kg Availability: immediately Location: Flörsheim

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. Hfodpfx Aerzhfpsh Nob * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Tempering oven ARTUR NOLZEN type TL30/30/50 Warm air oven, convection oven, heating cabinet Fabrication no. 14785 Year of construction 1996 Temperature range max. 750°C Hfedpeq Ubqiofx Ah Njb Internal dimensions 300 x 300 x 480 mm Inner width at center bar 260 mm Connected load 6 kW Mains connection 400 Volt, 50 Hz - Temperature control NOLZEN type TRO t - 96 4 - THEBEN time control, type TR 635 top - Heating time to 750° C in approx. 95 min. Space requirement L x W x H 1300 x 1100 x 1400 mm Weight 310 kg good condition

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Drive motor: 45 kW Hfjdpjwikamsfx Ah Neb

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] Hjdjug U Thepfx Ah Nefb - voltage : 3 x 380 [V]

Condition: ready for operation (used), Hydraulic press brake LVD PPEB-EFL 220/30 CADMAN CNC Year of construction 2004 Serial number 28652 Technical specifications Force 2200kN Working length 3050mm Distance between uprights 2600mm Stroke 450mm Distance table – ram 685mm Gap 405mm Approach speed 100mm/s Working speed 9.5mm/s Return speed 110mm/s weight 16500 kg motor 22kW oil 350L Dimensions according drawing attached CADMAN CNC 2D graphic controller •Easy form laser EFL 130mm – W axe • Table PP8170 V-axe – table width 120mm • Wila hydraulic top tool clamping • LVD bottom tool clamping hydraulic • Back gauge DUO X X’ R Z1 Z2 (X 600mm) • Security; CE PP3580 – lasersafe PP5320 Hjdpfowcqpbex Ah Nefb

Year of construction: 2008, condition: refurbished (used), JÖNI EASY 30 & 50 LIT Hfedpef T R Akjfx Ah Nsb ID.NO. 1160 2x cooking pots Jöni model easy 30 & 60 liter year mod 2008 electric tip easy to use and repair when needed.

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Hfodpfx Ahspp Tkfo Neb Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Hfsdpjhmmfkofx Ah Neb Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool Hodecn Rdvopfx Ah Nsfb -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Condition: used, ATS Tanner ATS-CE 340/30 Banding Machine Hfsdpfx Aewlgz Soh Neb Product Width: 1”-13” Product Height: up to 6” Speed/Cycles: 22-26 cycles/min. Performance: Up to 26 bandings per minute Band width: 30mm Voltage 115 V/50 Hz, 115 V/60 Hz Electrical Power: ca. 0.2 kW Weight: 25 kg

Year of construction: 1978, condition: used, grinding length 600 mm grinding width 300 - 320 mm Hfodocwic Ispfx Ah Neb Electromagnetic clamping plate 500 x 200 mm Important note! There is no hydraulic and no coolant unit included! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Hfjdpfx Aevgt Dkjh Nsb Müller Martini 3006 /30 Z Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Hfedpferzhftex Ah Nob Programming and control system

Condition: used, Year of construction: 1992, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit Hfsdpfxsi En Dus Ah Nob -Manufacturer: Brueninghaus, hydraulic pump type OVS 0 28 DFR/30 R-PPA 12 N 00 -Pump: Nominal pressure 250 bar -Drive: Behncke QU FA 00L4B-41 -Power: 3 kW 1442 rpm -Dimensions: 620/300/H270mm -Weight: 50kg

Condition: good (used), Various normal + driven tool holders in different versions Hsdpfxjbql T Ee Ah Nsfb for VDI 20 + 30 + 40 + 50 + 60 Please indicate the VDI size you require with your enquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Hfjdorzhfhopfx Ah Nsb Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Condition: used, Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces Hsdpfjfgrphex Ah Nofb -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transversal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask! Hfsdpfjrzhflox Ah Nsb

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan -Manufacturer: Ziehl-Abegg, radial fan motor without fan wheel -Type: MK205-UDK.30.N -Speed: 950/480 rpm -Power: 0.66 kW -Protection class: IP 54 -Number: 1 piece -Dimension: Ø 368 x 330 mm -Weight: 64 kg Hfedpfxeucmm Ss Ah Njb

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos Hfedperi Unxsfx Ah Neb -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 12 pieces -Prisms: 25 ° x 10 mm -Drawing: in the photos Hfedpfegwdpmox Ah Njb -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg

Condition: used, Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg Hfsdpfx Ajfgrpgoh Neb

Condition: used, Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces -Length: 635 mm/15 mm/30 mm Hodpjd I Hizsfx Ah Nsfb -Weight: 2.2 kg/piece

Condition: used, Welding bar -from vacuum device: Roschermatic VM 45/2 -Price: per piece -Number: 2 pieces -Length: 680 mm/15 mm/30 mm Hedod I Hi Ajpfx Ah Njfb -Weight: 2.4 kg/piece