Used Apple Press for sale (13,509)

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Feed opening 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volumetric capacity: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions of press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: Lhedpjzulknsfx Apmjk New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made functional The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures. Lhjdpfxsy Tbvme Apmsk

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake Lhjdpfx Ajxf Na Uepmek CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Lhedpjzcgh Ejfx Apmok Weight: approx. 115 kg For further dimensions see pictures

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available. Lhedpfx Apowgi S Nemek

Condition: used, pressure 1000 t Lsdpogrnaqefx Apmehk table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Ledpey Tpr Aofx Apmshk Weight: 5700 kg

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm Lhjdpfx Ajiulkqepmsk total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm]: 3550 Press force [t]: 400 Control: Cybelec ModEva 10s Operating hours [h]: 94,201 Standard equipment: - Robust machine frame as all-steel, welded construction - Ram with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system - CNC back gauge for X and R axes, safe finger adjustment from the front via safety interlock Ljdpfoy Saurox Apmohk - EHT upper tool clamping system, manual, head width 26mm, max. load 3000 kN/m - EHT lower tool clamping, manual, clamping width 90mm for block and 13mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S on Windows, 2D graphical control with 10.4" color display - Control cabinet air conditioning + Back gauge - System 1, 5 axes, straight fingers, 140mm width, R-axis travel 150mm + EHT quick-clamp device for upper tools, pneumatic, head width 26mm, max. load 3000 kN/m (self-centering horizontally) + EHT pneumatic lower tool clamping, clamping width 55mm + Hardened insert strip for EHT lower tool clamping 55mm / 90mm + CNC-controlled lower tool shifting, stepless positioning via back gauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in table, without tool clamping, max. load 3000 kN/m + Lazersafe safety system (for max. upper tool height 440mm) + Additional foot switch + Bending aid, 1st arm, max. load 1500N, with 2 integrated standard support rails + Bending aid, 2nd arm, max. load 1500N, with 2 integrated standard support rails + 2 support rails for a bending aid with 14mm T-slot, ruler, and ball rollers + 2 table extensions for bending aid + Left short park position + Right short park position

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping Lhsdpfxsy Saq Ts Apmsk - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Lhsdpfx Apezukivemjk Gewicht / weight 840kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Lhsdpfx Ajzvq Rcjpmsk Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: new, Year of construction: 2023, Dear customers, For a quick and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, capture all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you further! Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube mount for briquetting press - Viewing window in the container Lsdpfskuz Tuox Apmohk Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must provide protection against hydraulic oil loss - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Condition: ready for operation (used), Year of construction: 2017, Dear customers, To ensure a quick and reliable response to your inquiry, we kindly ask you to contact us preferably by email. Lodpfxogny Ryo Apmohk This way, we can immediately assign your request to the appropriate contact person, collect all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! Technical data will follow.

Condition: used, Year of construction: 2007, Very little used Antares model AKER 630/50-OO chamber type filter press. - Manufacturer: Antares - Model: AKER 630/50-OO - Type of filter press: Chamber type - Dimensions of filter plates: 630 x 630 mm - Number and material of plates: (49) polypropylene chamber plates and (2) end plates - Number of chambers: 50 - Closing of filter press: Electrohydraulic - Hydraulik Vrchlabí model SHA-45, electric motor 1.5 kW Lodpfezvn Edex Apmehk - Removal of filter plates: Manual - Filtrate discharge: Open delivery - Includes: local control panel (switchboard is not included)

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) CE marked: Yes Lhsdpfezvnr Rox Apmek PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: excellent (used), Shelf length: 225 cm Ledpozvnq Hofx Apmshk Shelf width: 135 cm Maximum heating element height: 40 cm Maximum temperature: 120 °C Total power consumption: 14 kW

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Lhsdpozvnqtefx Apmok Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: ready for operation (used), Year of construction: 1984, Machine Identity & Compliance Manufacturer: Schmid (Feintool Schmid) Model / Type: T6-200 2 Year of Manufacture: 1984 Machine Serial Number: 20-1200 Internal Plant Asset ID: MK18166 / DB04134 Safety Certifications: CE Compliant Inspection Authority: TÜV Rheinland Operational Metrics & Current Counters Total Operating Hours: 110,777.4 Hours Total Stroke Count: 19,333,830 Total Strokes (Totalhübe) Mechanical & Force Profile Total Nominal Press Force: 2,000 kN (Approx. 204 Metric Tons) Downward Ejection Force: 400 kN Lower Ejector Stroke: 60 mm Maximum Slide Stroke: 200 mm Slide Range (Max Forming): 195 mm Slide Stop Adjustment Range: 75 mm Velocity & Frequency Ratings Rapid Approach Speed: 240 mm/s Return Stroke Speed: 240 mm/s Maximum Forming Speed: Approx. 26 mm/s Max Wobble Frequency: 340 cycles per minute (1/min) Fluid, Pressure & Lubrication Specifications Hydraulic Oil Capacity: 950 Liters Maximum Hydraulic Pressure: 320 bar Lubricating Oil Capacity: 100 Liters Ljdszvnicjpfx Apmjhk Maximum Lubrication Pressure: 550 bar Tooling Area & Configuration Setup Kinematic Type: Orbital / Wobble cold compression forming mechanism (Taumelantrieb) featuring a central heavy-duty guide pin. Die Space Requirements: Stamped for lower die installations using new mounting hardware (Einbau Untergesenk - Bitte mit neuen Schrauben). Integrated Safety Features: Electronic die protection circuitry (Gesenkschutz). Ejection Control: Upper and lower programmable ejection logic (Ausstossen). Air Cleanout Circuit: Pneumatic parts/debris blowout valve (Blasen). Logistics, Power & Automation Infrastructure Electrical Supply: 3-Phase / 400 V / 50 Hz Net Machine Weight: Approx. 10,200 kg (10.2 Metric Tons)

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Lhjdswnhicopfx Apmjk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 Lhjdpjwnhvvefx Apmjk - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: Ledpfx Aezvmqfopmshk - Pressing force: 320 t - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-part universal die, split - V-dies - Split upper tool set, various other tools

Condition: used, Platen press, 1300x2500 mm, 20/26. Lsdpfxozvmkxo Apmjhk

Condition: ready for operation (used), functionality: fully functional, table width: 1,030 mm, total length: 2,400 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 700 kg, C-S Supervariomat with 3 transversely movable arms Adhesive press for solid wood Lhodpfx Aozvmf Nepmek 5 support arms 4 levels Adhesive application depth 103 cm, length approx. 240 cm Installation area 180 x 240 cm READY FOR USE

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Ljdpfx Aozucxcopmshk Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.