Used Aluminium Saw Machine for sale (67,944)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, cutting range square steel at 90°: 450 mm, saw band length: 5,780 mm, saw band width: 41 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Hfedpfx Agovy Swiofjf Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hjdpfx Agjxx Hwwjfeff Hand held barcode scanner 6000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: used, saw blade diameter 450 mm Hsdpfsyfwxajx Agfsff capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min total power requirement 2,3 kW weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Technical data: - Sliding table: 2000 mm - Outrigger table: 1100 mm - Mitre fence: 1300 mm - Angle indexer - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117 Hjdpfxevxrure Agfoff

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Hfjdpfx Asxabztsgfjf Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm links Hjdpfxoxaai Ne Agfeff capacity 45 degrees: round 110 mm rechts capacity 45 degrees: square 100 mm links capacity 45 degrees: square 95 mm rechts capacity 45 degrees: flat 135 x 60 mm dimensions of saw-blade 350 x 32 turning speeds 1700 / 3400 U/min capacity 45 degrees: round 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 210 kg dimensions of the machine ca. 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP CNC total power requirement 2.6 / 3.5 kW weight of the machine ca. 605 kg range L-W-H 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Hfodpfexaa Uxox Agfsf * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm Hsdpjxabw Usfx Agfjff - in checked condition - machine video - ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Condition: new, saw blade diameter 600 x 30 mm capacity 90 degrees: round 215 mm capacity 90 degrees: square 195 x 195 mm capacity 90 degrees: flat 140 x 395 mm capacity 45 degrees: round 170 mm capacity 45 degrees: square 170 x 170 mm capacity 45 degrees: flat 100 x 175 mm turning speeds 2800 U/min total power requirement 3.0 kW weight of the machine ca. 310 kg range L-W-H 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from 0° to 180° right and left * In aluminum and light metal alloys * With rising saw blade * With extremely large cutting range (saw blade diameter 600 mm) * Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation and maximum precision - Large bearing-mounted turntable with internal indexing at 0/45° Hfedpfx Agjxaccfjfef * Ensures quick adjustment for miter cuts - Extractor nozzle for connecting a chip extraction system - Pneumatic spray system for cooling and lubricating the saw blade - Machine base frame - Powerful saw drive with 3-phase 3HP motor Included in delivery: - 1x carbide saw blade ø 600 mm - Blow-out gun - Full protective cover - Tool set - Detailed operating instructions, maintenance manual, etc.

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw Hfjdpfxoxaa Hno Agfsf * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 0 x 30 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 190x100 / 230x50 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 130 x mm turning speeds 2800 U/min mitre joint cuts -/+ degrees total power requirement 2.2 kW weight of the machine ca. 2 kg range L-W-H 1600 x 750 x 1000 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from ° right to ° left * In aluminum and light metal alloys * With rising saw blade - Manually opening safety guard (optionally with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy-duty cast iron construction ensures vibration-free . operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/° * Ensures quick adjustment for miter cuts - Extraction nozzle for connecting a chip extraction system Scope of delivery: - 2 pneumatic vertical vices with quick adjustment - Tool set - Detailed operating instructions, maintenance manual, etc. - Blow-out gun Hfjdpfx Aexaa Husgfjf - Machine is delivered without a saw blade!

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm Hfedsxabg Aspfx Agfjf capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts Hfsdpfexaaxdjx Agfsf - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg Hjdpfxsxabqzj Agfsff dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz Hodju Rv Ttepfx Agfeff -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany Hfsdpfx Asx Rvb Segfof

Condition: used, Technical details: grinding wheel diameter: 240 mm saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically Hfsdsu Ng Edjpfx Agfsf saw blade continue to move automatically grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) *

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm Hsdpju Ng I Eofx Agfsff *

Condition: used, Year of construction: 2011, functionality: not functional, total height: 2,500 mm, total length: 12,000 mm, total width: 4 mm, power: 65 kW (88.38 HP), overall weight: 10,305 kg, bar diameter (max.): 110 mm, pipe diameter (max.): 110 mm, turning length: 350 mm, workpiece diameter (max.): 110 mm, Equipment: documentation/manual, We are offering this used Sinico SIN-O-MATIC TOP 2000 cutting and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 kW max CNC control by NUM Automatic machine for cutting to length and end-finishing. Transfer machine with horizontal axis table for cutting and end-processing of tubes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 parts/hour, and is designed for processing small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for machining tubes and bars. The machine is capable of performing the following operations: Chamfering – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled but has a fault, which is why it cannot be shown under power. Hedsycr Nhspfx Agfsff If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Hfodpfx Ajycqhcsgfjf Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, We are selling the EMS 10 U machine, year 1988, no. 187. It is in good condition – see photos! The technical specifications can be found in the operating manual; please refer to the documents at the link below! The machine was used in our facility for frame saw blades. The original operating manual is included as well. Please feel free to make us an offer! Hsdpfx Ageycfy Hofjff Pickup in 6858 Schwarzach.

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Hfodji Ezq Dopfx Agfef Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Hfodeh Nm Ncspfx Agfsf Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Hfjdpfx Agsfh R Tyofsf Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor Hfsdpfx Aefibfasgfsf 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from