Used Akerman Ew 200 for sale (17,939)

Year of construction: 2025, condition: new, Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; suitable for volumes from 200-1000ml; accuracy: +/- 1.5%; max. film width: 320mm; bag width: 100-160mm (depending on pouch type); bag length: 95-165mm; 0.7m³, 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Kjdpfxsv Nmznj Ahgonb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), functionality: fully functional, power: 74.9 kW (101.84 HP), fuel type: diesel, overall weight: 10,500 kg, operation weight: 10,500 kg, first registration: 01/2009, Year of construction: 2009, operating hours: 4,809 h, Wacker Neuson 9503 EW/SW/4X4X4/Hydr. Adjustable / 4800 hours • Manufacturer: Wacker Neuson • Type: 9503 WD • Year of manufacture: 2009 • Operating hours: 4809 hours • Overload warning device • Transport dimensions: L: 5.88 meters x W: 1.92 meters x H: 2.88 meters • Power: 74.9 KW/102 hp • Engine: Deutz TCD 2012 Knodpfxezduh Uj Ahgob • Maximum reach: approx. 6 meters • Digging depth: approx. 3.6 meters • Mechanical quick coupler system • Quick coupler: Lehnhoff / SW08 • High and low speed gears • Immobilizer • Auxiliary hydraulics • All-wheel steering 4x4x4 • Dozer blade • Total weight: 10500 kg • German machine • First owner • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Knjdpfx Aezzllxohgjb Max. pressure: 16 bar You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2020, fuel type: electric, Lifting capacity: 250 kg Please contact Gebrauchtgeräte Center for more information Knjdpfszfla Dex Ahgsb

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Ksdpjzuy Tdefx Ahgjnb Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector Knjdpozw Atlofx Ahgsb • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, FTNON-JBT MOP-200 onion peeling machine + SRI-200 sorting table For sale: an FTNON-JBT MOP-200 industrial onion peeling machine, complete with the accompanying FTNON-JBT SRI-200 sorting table. The equipment is suitable for industrial onion processing and can be used for inspecting and sorting the product after the peeling process. The two machines can be operated as part of a technological line. Machine details: Manufacturer: FTNON-JBT Type: MOP-200 onion peeling machine Type: SRI-200 sorting table Type: with onion feeding hopper Application: industrial onion peeling and sorting Stainless steel, food-grade design Suitable for industrial use Sold together with the sorting table connected to the onion peeling machine. The machines are in used condition. Viewing is possible by prior arrangement. Kodpfx Aezw A R Rohgonb The equipment is primarily recommended for food processing plants that want to expand their onion processing capacity or supplement their existing technological line. Additional technical data, photos, and information are available upon request.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm Ksdpfxszv Sfbj Ahgjnb C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Year of construction: 2019, condition: ready for operation (used), Ulma weighing and packing line Complete weighing and packaging line with an Ulma multi-head weigher and an Ulma vertical bagger. This line consists of the following machinery: Kedpfx Ahozvc Dzegonb 1. Infeed conveyor belt; 2. Ulma multi-head weigher; 3. Ulma VTI 200 vertical bagger; 4. Outfeed conveyor belt; 5. Platform; 6. Stair; Ulma Multi-Head Weigher Manufacturer: Ulma Year: 2019 Max. weighing speed: 30 bags/minute Number of heads: 10 Volume of heads: 2.5 liters Max. weighing range: 5,000 grams Power: 400V / 50Hz / 1kW Ulma VTI 200 Vertical Bagger The VTI 200 machine has been specifically designed for the packaging of a wide range of different product types and focuses on markets where the main requirements are simplicity, reliability, and ease of operation. The combination of pneumatic operation of the horizontal sealer and an AC motor for the draw-down belts provides the machine with great versatility for use in many different environments. The robustness of all mechanical and electrical parts, a compact design, and ease of operation, together with low maintenance requirements, make it the ideal competitively priced machine for intermediate-speed applications. The machine is operated via a 5" color touch screen with an integrated industrial PC. All machine parameters are adjusted and saved within this interface, resulting in a very flexible and quick changeover machine. Manufacturer: Ulma Model: VTI 200 Year: 2019 Capacity: Max. 70 bags/minute Film reel width max.: 600 mm Film reel outer max.: 450 mm Film reel core max.: 76 mm Power: 400V / 50Hz / 4kW The machine is equipped with the following tool: Bag Type: Pillow bag; Bag dimensions: BOPP L x W 145x145mm / Laminate L x W 170x170mm Foil width: BOPP 310mm / Laminate 365mm; Max product dimensions: 70mm

Condition: like new (used), number 1 Stück LORENZ disc cutting wheel HM: HB10 - F Knedezupl Ajpfx Ahgeb Z2/Z0= 15/60 14 - 44C 46 711/1 mn3.08 an21° z60

Condition: good (used), Round brush, grinding wheel, chip brush, wire brush -Round brush: Steel wire brush, 200 pieces -Outer diameter: 126 mm Kodpszuap Ssfx Ahgenb -Width: 35 mm -Bore diameter: 13 mm -Submission/Price: complete -Weight: 0.5 kg/piece

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg Kjdszqyw Ijpfx Ahgonb

Condition: used, Year of construction: 1999, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,780 m³/h, AL-KO Mobil-Jet 200, 3 kW, 400 V, year of manufacture 1999, 2,780 m³/h, connection diameter 200 mm, functional/can be demonstrated. Collection and loading will be carried out by the buyer. Piping can be included upon request. Price: EUR 1,900.00 net, ex works. Knjdjzx Swijpfx Ahgob

Condition: new, Hello, I would like to offer high-pressure KSB pumps with ABB electric motors. Applications for the pumps: - Chemical industry - Fuel industry - Gas industry - Paper industry I have various models available: Knsdpfxszx Upze Ahgsb - 5 units: MCPK150-125-200 VX LXM - 5 units: MCPK065-040-200 VC EXM - 2 units: MCPK100-065-200 VC LXM - 2 units: MCPK080-050-315 VC EXM The stated price is for 1 complete pump with motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Manufacturer: GRAULE Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Knjdpfozx N T Iex Ahgeb Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, machine/vehicle number: FGWPEP48ERPC03709, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 1.548 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 251 x 101 x 164 cm Kodpfx Ahowafzmjgonb CE mark: yes Other information Fuel consumption: 30,7 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 394 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Ioan Munteanu Kedpfx Ahszlc Edogsnb

Condition: used, Year of construction: 2017, operating hours: 2,963 h, axle configuration: 4x4, color: other, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 10.050 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 2.000 cm CE mark: yes History Number of owners: 2 Other information Knedpfx Aozzl D Iohgeb Emission level: Stage V / Tier V Delivery terms: EXW Max. horizontal reach: 1100 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-08-08 Production country: IT Additional information Please contact Martyn Joosse for more information

Condition: used, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,380 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2017, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Empty weight: 7.200 kg Carrying capacity: 34.800 kg Kjdpfxsucy Agj Ahgsnb GVW: 42.000 kg

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body Kedpfxjzxqq Io Ahgjnb - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Knjdpfx Aozyihujhgjb Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Kodpoymf H Usfx Ahgonb Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 303 h, load capacity: 250 kg, empty load weight: 2,782 kg, construction height: 1,998 mm, fuel type: diesel, total length: 5,324 mm, drive type: Diesel, arm reach: 8,500 mm, construction width: 780 mm, working height: 20,000 mm, Track-mounted aerial platform Technical condition: very good Battery condition: very good Knodpfx Ahowx Txqegsb Description: The CTE TRACCESS 200 diesel is a compact track-mounted aerial platform for working at height in tight spaces, on sensitive surfaces, or in difficult terrain. With a working height of up to 20 m, a lateral reach of up to 8.5 m, and its track system, this machine is ideal for assembly, maintenance, and tree care work, even in hard-to-reach locations. Compact, all-terrain capable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. In addition to this machine, we offer aerial platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. You can get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. Kedpfezw Uh Uox Ahgjnb -Complete user and maintenance manual (including parts list and programming instructions). SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Kodpszvnfwsfx Ahgsnb Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot