Used Abus Vs for sale (107)

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Godpfx Agjxmf R Se Djkf Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, -KOM 3163- Offered here is a load crane from Abus. The crane can lift up to 80 kg. In addition to the crane, you receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be seen in the last picture. Unfortunately, the nameplate is no longer present. Gkjdpfx Asxcnxqeg Def

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 20020301, ABUS ZHB crane canopy Crane runway dimensions approx. 11.8x4m Payload / lifting capacity 500 KG - 0.5 tons Technical data of the system: Crane runway made of ABUS HB rails with raised trolley System is supplied complete: ABUS HB rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Abus GM 500KG chain hoist, travel drives and floor control cylinder Gksdpfx Agoucn N Io Djf Lifting height approx. 5m Crane is dismantled and immediately available Almost new condition, hardly used, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other Abus HB and Demag KBK systems are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 293 kg, maximum load weight: 250 kg, total length: 7,230 mm, total width: 346 mm, lifting height: 3,000 mm, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, fine lifting speed: 34 mm/s, main lifting speed: 8,000 mm/min, protection type (IP code): IP65, machine/vehicle number: LW, 2x Abus wall-mounted jib crane + Abus chain hoist ( as good as new ) - Price per set The LW wall-mounted slewing jib crane is designed for mounting on a wall or support. This workplace crane offers you a working radius of up to 180° with an outreach of up to 7 m and a load capacity of up to 250 kg. Gksdpfet I S N Dox Ag Def Unobtrusive and reliable, the LW wall-mounted slewing jib crane helps you to move low loads by hand. Thanks to its lightweight design, it and the load can be guided quickly and precisely, even with large outreaches, providing you with effective support in your daily work. Chain hoist tare weight: 21.8 kg The sale is subject to the exclusion of any warranty.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, ABUS double girder overhead traveling crane Type: GM 7000.32000H Load capacity: 36000kg Quantity: 2 double girder overhead traveling crane bridges Goder A A Rlopfx Ag Dokf All crane bridges have been regularly inspected and maintained - certificates available. Available immediately. More information is available on request.

Condition: used, Dear Sirs, Gsdpfx Aop Dhbeg Djkf We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Furthermore, we can offer you the electric chain hoists at favorable conditions.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, For sale is the ABUS crane shown in the pictures, and the associated vacuum glass lifting unit with 6 vacuum plates. The crane arm is 7 meters long. It can be rotated 360 degrees. Gkjdpfx Agev Nqdyo Dof Height: 3850mm Capacity 400Kg The picture shows it in excellent, well-preserved condition!

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Gkjdpoxbfutjfx Ag Def

Condition: good (used), functionality: fully functional, -KOM 3026- On offer here is a fully functional ABUS gantry crane. Attention: Special feature: Operation on the crane hook. Gedpou Hy Sljfx Ag Djkf Technical data: maximum load capacity: 160 kg Length of the rail: approx. 13,800 mm Width of the rail: approx. 2,800 mm

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection Gedpfx Ajxak H Ejg Dskf The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: good (used), Year of construction: 2019, machine/vehicle number: 110-044732, Offer 25161 Technical Data: - Load capacity: 3200 kg - Track gauge approx.: 9090 mm - Clearance height approx.: 360 mm - Beam length approx.: 2400 mm - Wheelbase: 1900 mm - Hook travel approx.: 6000 mm - Reeving: 2 / 1 Gkodpfx Ajw S D U Ujg Djf - Speeds: - Trolley travel approx.: 20 m/min + 5 m/min - Hoisting approx.: 5 m/min + 0.8 m/min - Crane travel approx.: 20 m/min + 5 m/min - Operation via radio remote control - Total weight – crane approx.: 1600 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: KA20+23, ABUS Crane Overhead Crane Bridge Crane Indoor Crane The crane is available twice in identical construction!! Optionally available: 2x 20m HEA220 crane rails, 4 supports (window side), and 20m Vahle conductor rails Gkedpsxdv Nmsfx Ag Dsf Load capacity / lifting capacity 1t - 1000KG Track gauge 9500mm, external dimension approx. 9750mm Year of manufacture: 1990 with pendant control Lifting height 6m Hoist: GM chain hoist, 4m lift Construction height (top edge of crane to hook) approx. 600mm End carriage length with buffers approx. 220cm Crane is dismantled and immediately available Very good condition, inspection book is available Column slewing cranes and wall slewing cranes are also available Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight possible, please enquire with postcode Collection preferred

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... NEVER USED - complete metal forming / processing plant (about 80 machines) Gjdpfxjvldr Ae Ag Dekf Please contact us for full machinery list and more photos. Thank you!

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) - Jib electrically slewing via geared motor (2 speeds) - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition Gsdpfx Agjwzmi Ij Dokf

Condition: good (used), ABUS GM4 500.8-1 electric hoist second hand Capacity: 500 kg Chain length: 32m Gjdpeudwbiefx Ag Djkf Length of pushbutton panel: 22m Year: 2004 Speeds: 1

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). Gkjdpsxak Hxjfx Ag Dof included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: good (used), Year of construction: 2019, machine/vehicle number: 110-044731, Offer 25160 Gkedpfx Agew S D Ems Djf Technical data: - Load capacity: 3200 kg - Track gauge approx.: 9090 mm - Clearance height approx.: 360 mm - Beam length approx.: 2400 mm - Wheelbase: 1900 mm - Hook travel approx.: 6000 mm - Reeving: 2 / 1 - Speeds: - Trolley travel approx.: 20 m/min + 5 m/min - Hoisting approx.: 5 m/min + 0.8 m/min - Crane travel approx.: 20 m/min + 5 m/min - Operation via radio remote control - Crane total weight approx.: 1600 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD431+432, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane There are 2 identical cranes available!! Load capacity / lifting capacity: 1t - 1000 kg Span: 11,250 mm, external dimension approx. 11,500 mm Year of construction: 1989, with floor control Lifting height: 6 m Hoist: GM1010 F6 Overall height from top of crane to hook approx. 610 mm (320 mm girder + 290 mm hoist) End carriage length with bumper approx. 228 cm The crane is dismantled and available immediately Very good condition, inspection book available Column-mounted slewing cranes and wall-mounted slewing cranes are also available Gkedpfxjxdvnco Ag Djf Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible, please inquire according to your postal code Collection preferred

Condition: like new (used), functionality: fully functional, ABUS Monorail Hoist Type GM3063, almost as new Stored as reserve stock, likely overhauled or new, no documentation! Nearly new condition No wear on rope and rope guide, load hook/block, running wheels, control cabinet/control system, or control pendant Complete with travel carriage (2 travel motors Type GE 1200) Lifting capacity: 6.3 t Reeving: 4/1 Gksdpfx Agjv Uvdps Def Lifting speeds: 0.8 / 5 m/min Duty classification: 3 With two travel motors From a large spare parts stock of DEMAG / ABUS / STAHL, see also my other listings Info: Over 20,000 DEMAG spare parts in stock! Check out my other warehouse stock offers as well!

Year of construction: 2004, condition: good (used), ABUS GM4 500.8-1 electric hoist, second hand Capacity: 500kg Chain length: 32m Length of push-button panel: 22m Year: 2004 Speeds: 2 (2m/min. - 8m/min.) Motor: Three phase 380V Gjdpfx Aoudwdkog Dekf Power: 0,9KW

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control Godpfexak D Rox Ag Dskf - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: AGH633, Technical data: 1 ABUS LS column slewing crane, rated load 1000 kg Capacity at full outreach: 1000 kg / 1 t Gkodpfxoxdvk Rj Ag Djf Height: approx. 3.4 m Underside of jib: approx. 2.55 m Outreach: approx. 4.5 m Hook height: approx. 2.15 m Total weight approx. 1000 kg incl. anchor plate, diameter 110 cm Incl. Abus GM chain hoist 1000 kg Slewing range 270°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity from 80–5000 kg, please inquire See pictures Shipping by freight forwarding or collection by appointment only

Year of construction: 2001, condition: excellent (used), machine/vehicle number: RES J-BO, ABUS HB crane canopy Crane runway with dimensions approx. 10x5m (5m bridge) This crane is available several times in different lengths. Example pictures ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of ABUS HB200 rails System is supplied complete: HB rails, rail connectors, trolleys, end plates, brackets/hangers etc. incl. 500KG Abus chain hoist - lifting height approx. 4m Godpfx Aeu I Uwxsg Djkf Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1987, condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Head carrier length without buffer approx. 2200mm Crane is dismantled, stored and immediately available. Very good condition There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agency possible, please ask for postal code Gksdpfx Agjifyhhe Djf Collection preferred

Year of construction: 1996, condition: excellent (used), machine/vehicle number: MBMA101, Abus / Hert - year of manufacture 1996 / conversion 2014 Gjdpfx Aeqqhf Dog Dokf 1-girder suspension crane, bridge crane, crane track, hall crane, gantry crane Payload 1000KG Crane is available 2x: Chassis can be adjusted to the carrier size up to approx. 10-16cm. Incl. complete control, floor operation using a control bottle 2 lifting speeds, 2 strands All cranes can be moved completely electrically in all 3 axes Lifting height/hook travel approx. 6m Connection to 400V 16A, built in 1996 Very good used condition Shipping by courier, collection preferred Location 75053 Gondelsheim Please inquire about shipping prices according to zip code, we will make you an immediate, non-binding offer!