Used 4 Shaft Shredder for sale (32,636)

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Gjdewu Nwhspfx Afkett Hopper inlet 2.26 m x 1.65 m

Condition: excellent (used), Year of construction: 2022, operating hours: 2,330 h, functionality: fully functional, machine/vehicle number: 7535, overall weight: 28,500 kg, power: 405 kW (550.65 HP), Mobile Shredding Plant LINDNER URRACO 4000 DS (self-propelled) Gedjxyq Ipjpfx Afkett Discharge conveyor with overband magnet, dust suppression system, compressed air compressor for machine cleaning SF12.9 shaft pair with accessories Pre-breaker shaft pair with accessories available upon request

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Godsxbyx Tjpfx Afkott Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, overall weight: 950 kg, warranty duration: 12 months, power: 7.5 kW (10.20 HP), input current: 32 A, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Mercodor shredder ZM 44 complete machine with safety devices and switches. Siemens PLC control with overload protection etc. Machine with a cutting area of 500x380 mm knife 14 mm 3 hooks drive 7.5 KW. Gedpfx Aoiv Sr Nefkett

Condition: used, overall weight: 24,000 kg, rotor diameter: 640 mm, number of blades: 114, rotor length: 2,500 mm, power: 247 kW (335.83 HP), No. 10023 Single-shaft shredder Vecoplan VAZ 2500 Used, year of construction approx. 2006 2022 general overhaul Since overhaul approx. 700 operating hours Areas of application: Residual wood, waste wood, packaging material, film, plastic, paper, textiles, domestic waste, commercial waste, production residues as bulk material, production residues in bales 247 kW Gtsdswh T N Ujpfx Afkot Rotor length 2500 mm Rotor diameter 640 mm 114 pieces 60x60 cube knives, 4-row Shredding optionally to a grain size of approx. 10 - 250 mm Screen basket 50 mm Throughput capacity up to 25 tons per hour / throughput waste wood approx. 30 tons per hour Material feed with hydraulic pusher Scope of delivery: machine, hopper, control cabinet, refrigerator Mechanization optionally available Transport dimensions approx. 4750 x 4640 x 2340 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Gjdpfxetql S Tj Afkott Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 556, Model: Lindner Micromat MS2000 Year of Manufacture: 1997 Condition: Refurbished 2025. Zero operating hours since refurbishment. Location: Riga, Latvia Machine Specifications: Machine Weight: 9.5 t Dimensions: Not specified. Material Suitability: Plastics, mixed waste, etc. Drive System: Motor: Elin AC Motor, 75 kW, 1500 rpm, 400 V, 50 Hz. Frame size: 280S. Mounting: B3. V-belt drive: Ratio i=0.93. Gearbox: Stiebel Type 0220.15. Bore 140 mm. Ratio i=20. Safety Coupling: SecMatic Type 580.32.3.2. Factory setting: 1300 Nm. Rotor Speed: 80 rpm. Hydraulic Unit: Type: MM2000 / 13 / 6 Output: 35±5 l/min Oil Tank: 100 l. Oil: Castrol Vario HDX. Pressure: Inlet 160 bar, Outlet 60 bar. Drive Motor: 5.5 kW, 1425 rpm, 400 / 660 V. Mounting: V1. Gtsdpfexvmqrox Afkjt Pusher Cylinder: 60/35×605 mm. Swivel Cylinder: 50/30×700 mm. Cutting System: Knives: 104 pcs. Size: 43×43×23 mm. Screen Hole Size: Ø50 mm. Material Transport: Screw conveyor. Refurbishment Summary (Completed 2025): Paint: Components cleaned, prepped, and painted. Color: RAL7032 / 2002. Rotor: 22 new teeth installed. 35 existing teeth repositioned. 30 protective tooth covers replaced. Counter-Knives: 3 internal counter-knives replaced. External counter-knives repositioned. Structural Work: Welding repairs performed on frame where cracks were present. Hydraulics: Hydraulic station oil filler cap and motor cover repaired/replaced. Control Panel: Repaired. Assembly: Equipment assembled, installed, and packaged

Condition: refurbished (used), Year of construction: 2007, power: 45 kW (61.18 HP), Single-shaft shredder with hydraulic pusher. Brand: VECOPLAN Model: VAZ 1300 M Cutting width: 1,300 mm Power: 45 kW Blades: 40 mm x 40 mm. Machine fully overhauled – hydraulic, electrical, mechanical. Gedpfx Afsxprbcekott

Condition: like new (used), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 8147, power: 160 kW (217.54 HP), rotational speed (max.): 179 rpm, Features: - Enclosed hopper with suction point - Pusher with profiled cutting chamber floor - Safety lines for hydraulics, machine operation down to -25°C Gedpsxup A Ijfx Afkett - Wear protection package (checkered pattern) - Electrical integration of belt conveyor (3 kW–11 kW) - Bus connection to external control system - Power control with frequency converter incl. air conditioning - Energy measurement module - Control cabinet enclosure suitable for temperatures down to -25°C

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Gedpfxoxtp Die Afkett Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: used, Year of construction: 1995, Granulator / Knife Mill Manufacturer: CMB (France) Model: MS 610 NC Hjda Asxg Thrjza Spju Main motor: 90 kW Rotor length: 1000 mm Rotor diameter: 600 mm Rotor knives: 5 x 2 Stator knives: 2 x 4 + blower Gsdpfx Afoxg Th Sjkett + big-bag station with cyclone + water cooling The machine was dismantled from the customer's facility and is stored in our warehouse.

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Track chassis Overband magnet with discharge container Gtedpfx Aownpwzefkot Water spraying for less dust spreading Remote control 1 set of shafts of choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans - Finger screen, disc screen - and more…

Year of construction: 1996, condition: good (used), Shredding system, twin-shaft shredder, 2-shaft shredder, shredder, chipper, cutting mill, twin-shaft crusher, rotor mill -Shredder system: equipped with 24 cutting blades -Engine power: 7.5 kW -Speed: 28 rpm Gsdpfx Aevbylwefkjtt -Dimensions cutting blade: 250 x 19 mm -Filling nozzle 500 x 470 mm -Dimensions 650/1760/H470 mm -Weight 864 kg

Condition: refurbished (used), Year of construction: 2006, operating hours: 6,720 h, functionality: fully functional, machine/vehicle number: 221, power: 250 kW (339.91 HP), Primary shredder: Brand: SID Model: XLM 9 knives Cutting width: 2,800 mm Working width: 1,900 mm Knife width: 100 mm Power: 250 kW Machine fully refurbished – ready for operation. Includes: hydraulic unit, hydraulic cooler, electrical cabinet, hydraulic circulation pump, Gedpfx Afexpq Uuekott hopper equipped with water diffuser. Machine available for immediate delivery, subject to prior sale.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Godpfx Afsxp Nm Nskjtt Shredder located in Carlisle.

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg Gtjdpebq Su Nofx Afkjt

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Gtsdpfxeu Thabs Afkst Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm)) Gtedpfx Aot Urq Usfkst

Condition: used, functionality: fully functional, rotor diameter: 194 mm, number of blades: 23, type of input current: three-phase, rotational speed (max.): 975 rpm, rotational speed (min.): 975 rpm, rotor flight circle: 610 mm, working width: 500 mm, funnel diameter: 740 mm, sieve perforation: 25 mm, Wood Chipper / Shredder NAZZARENO K700 Industrial machine designed for shredding wooden elements, carpentry waste, battens, and wood blocks. Gtedpfx Afsxnxr Ejkot Manufactured by Costruzioni Nazzareno (Italy) – robust, industrial build offering high reliability.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF This machine is still in operation and will be available on October 20th. For more information, please contact us. Gedpfx Afexlm Trjkjtt

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Motor Power 2 × 15 kW (Total 30 kW) Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Gjdpfxjxlcvcj Afkjtt Knife Diameter 260 mm Knife Thickness 15.5 mm Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration ♻️ Suitable For Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Gtedpfxjwxmb Ee Afkot Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Reversing rotor Gtedpfxjxqxbxo Afket Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Overbelt magnet: Extra-strong neodymium version, hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more…

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Gtjdpfx Asv S Hyvsfket Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: used, Year of construction: 1996, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 75 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. new Rotor knife shape: 43x43x19.5 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Hydraulic cylinder sieve cassette: screens 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Gedswtbyxjpfx Afkett Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately