Used 3D Probe for sale (2,718)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Kaunas
17,403 km
3d printer
MakerBotReplicator Z18
Call
Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications:
Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in]
Layer Resolution: 100 microns [0.0039 in]
Filament Diameter: 1.75 mm [0.069 in]
Print Chamber: Enclosed and heated build chamber
Connectivity: USB, Ethernet, Wi-Fi
Condition Details:
Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies.
Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained.
Included in the Kit:
MakerBot Replicator Z18 3D Printer
Ledpfx Aijqy E N Seishh
On-board Camera for Print Monitoring
Swappable MakerBot Smart Extruder+
MakerBot Large PLA Filament (Various Sizes)
Intuitive Display, Dial, Assisted Leveling
Condition Note: Company-used printer, always stored in optimal conditions.
Listing
Güglingen
18,603 km
3d printer
SLMSLM 125 HL
Call
Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH
Ledey Uzciepfx Aiijhh
Type: SLM 125 HL
Manufactured / Serial No.: 12.16.0072
Year of manufacture: 2016
Weight: 800 kg
Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100)
Documentation: yes
Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request)
Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation.
Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system.
Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials.
Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height)
Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height)
3D optics configuration: Single (1x 400 W) IPG fiber laser
Build rate: up to 25 cm³/h
Variable layer thickness: 20 μm - 75 μm, 1 μm increments
Min. feature size: 140 μm
Focus diameter: 70 μm - 100 μm
Max. scanning speed: 10 m/s
Average protective gas consumption during build process: 0.6 l/min (argon)
Average protective gas consumption during flood process: 70 l/min (argon)
Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW
Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar
Listing
Saerbeck
18,451 km
3D Profile & Tube Laser Cutting Machine
DURMAHD-TC 60170 Fiber
Call
Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Manufacturer: DURMA
Model: HD-TC 60170 Fiber
Year of construction: 2024
Automatic loading unit 6000 mm
Unloading system 4000 mm
Laser power: 2000 watts
Control system: Siemens Sinumerik 840D
Operating hours: 24 hours
Max. tube diameter: 170 mm
Min. tube diameter: 20 mm (12 optional)
Max. dimensions of square profiles: 120x120 mm
Max. dimensions of rectangular profiles: 150x100 mm
Max. profile length: 6500 mm
Min. profile length: (for automatic feed) 3000 mm
Max. profile weight: 37.5 kg/m
Max. material thickness: (for 2 kW) 8 mm
Min. material thickness: 0.8 mm
Length of the last inserted part: 185 mm
Positioning accuracy: +/- 0.20 mm
Repeatability accuracy: +/- 0.05 mm
Max. loading capacity: 3000 kg
Profile types: round, square, rectangular, elliptical H, C, U, L
*Footprint L/W/H: approx. 16000x7400x2350 mm
* Weight: approx. 20000 kg
* depending on the equipment variant
Standard equipment
Control system Sinumerik 840D
Autofocusing PRECITEC Procutter cutting head F150 focus
Manual unloading table
Manual loading
Laser diode for defining position points
Ljdpedx Nfwefx Aiijhh
Central lubrication
Chip conveyor
External user interface for outputting analog values (power, speed, pressure)
External CAD/CAM programming software Lantec with autonesting
Work area lighting
Warning light
Various laser cutting options selectable
Remote control: remote maintenance access via LAN connection or WLAN
CE marking
Extended equipment
IPG fiber laser source 2000 watts (including cooler)
Automatic loading unit 6000 mm
Unloading table 4000 mm
Filter, compact dust extraction - Vanterm
The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg.
Other machines are available for demonstration at our facility in Staufenberg.
Upon request, we will be happy to provide you with further information.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Saerbeck
18,451 km
5-axis laser cutting machine | 3D
Durma |HD-FA
Call
Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for the production of automotive and other high-precision and complex 3D components. The system offers 25% more processing area than machines with the same concept. For flawless cutting performance, the powerful machine body and rotary table provide the best quality. Thanks to the easy-to-use design, you can save time. Due to components from well-known manufacturers and high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. With this technology, you will have lower energy consumption and can increase your company's profits. The machine is impressive due to its speed, reliability, and design.
HD-FA Technical Data
Available in 2, 3, and 4 kW
X-axis: 3,000 mm
Y-axis: 1,500 mm
Z-axis: 650 mm
B-axis: ±135°
C-axis: ±360°
Maximum vector speed: 173 m/min.
Maximum vector acceleration: 1.73 G
Tolerance positioning: ±0.08 mm
Repeatability: ±0.08 mm
MACHINE DIMENSIONS
Machine size: 6168 mm x 3936 mm, h= 3700 mm
Working area: 9,000 mm x 10,000 mm (Safe area)
Distance of rotary table door: 4,000 mm
Machine weight: 16,000 kg
Cutting head:
Type: 3D
Focus type: Automatic
Lhjdpfx Aieg Adknoioh
Control unit: CNC Siemens Sinumerik 840D SK
Screen: 19-inch touch screen
Filter
Capacity: 2,500 m³/h - 4 kW
Listing
Denkingen
18,679 km
3D coordinate measuring machine
KeyenceVL-500
Call
Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, type plate available, We are offering this used Keyence VL-500 optical 3D coordinate measuring machine, manufactured in 2020.
Manufacturer: Keyence Corporation
Model: VL-500
Country of Origin: Japan
Year of Manufacture: 2020
Serial Number: CC910026
System consists of:
Control Unit: VL-500
Base/Object Table: VL-530
Measuring Head: VL-570
Lsdpfey Uw Dvsx Aiiehh
Calibration Plate
Manuals
Dongle
Last calibration performed by the manufacturer in November 2024.
If you have any questions or require further information, please feel free to send us a message or call us.
Discover more used machines
Listing
Donaueschingen
18,703 km
3d printer
StratasysObjet500
Call
Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced.
The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality.
Lhsdpfxsy Uwlas Aiieh
After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options.
Condition:
Defective / in need of repair.
Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner.
On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company.
Technical data according to the manufacturer's specifications for the Objet500 series:
Manufacturer: Stratasys
Model: Objet500 / Objet500 Connex series
Process: PolyJet 3D printing
Build volume: approx. 490 × 390 × 200 mm
Layer thickness: up to 16 micrometers
Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis
Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm
Machine weight: approx. 430 kg
Material cabinet: approx. 330 × 1,170 × 640 mm
Weight of material cabinet: approx. 76 kg
Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase
Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval
The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm.
Note regarding the defect:
The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts.
Terms of sale:
Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change.
Inspection possible by arrangement.
Sale takes place at the location.
Listing
Donaueschingen
18,703 km
3d printer
FormlabsFuse 1 Komplettset
Call
Condition: used, functionality: fully functional, machine/vehicle number: ZanyTapir, Year of construction: 2025, operating hours: 251 h, total length: 700 mm, total height: 1,600 mm, total width: 700 mm, type of input current: AC, overall weight: 120 kg, input voltage: 230 V, Complete set consisting of Fuse 1, Fuse Blast, Fuse Sift, Mini 5-5 RG40104, and IVR 35/20-2 Sc Me
For sale is a complete machine/system set in like-new condition, consisting of several coordinated components.
Scope of delivery / set consists of:
Fuse 1
Fuse Blast
Fuse Sift
Mini 5-5 RG40104
IVR 35/20-2 Sc Me
This set is ideal for use in production, workshop, or industrial environments. The components are offered together as a complete set and are in very good, like-new condition.
For operation or printing with white powder, the nitrogen generator Mini 5-5 RG40104 is required.
A suitable compressor is offered separately in another listing, if required.
Condition: like-new
Availability: immediately / by arrangement
Collection / shipping: by arrangement
All information is provided to the best of our knowledge and belief. Subject to prior sale and errors.
If you are interested or have any questions, please do not hesitate to contact us. We will gladly provide further pictures or information.
Terms of sale:
Lhodpfsy Uvikjx Aiieh
Sale exclusively to businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty/liability for defects. No guarantee is given. Subject to errors and prior sale.
Inspection possible by arrangement.
Sale is ex-works.
Listing
Donaueschingen
18,703 km
3d printer
StratasysJ850 Digital Anatomy
Call
Condition: good (used), functionality: fully functional, machine/vehicle number: G1850438, operating hours: 675 h, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 220 V, input current: 7 A, table width: 390 mm, table length: 490 mm, Stratasys J850 Digital Anatomy – professional PolyJet 3D printer for medical and anatomical models
For sale is a Stratasys J850 Digital Anatomy, a high-quality industrial PolyJet 3D printer for realistic medical, anatomical, and functional models. This machine is ideally suited for clinics, medical device companies, research institutions, universities, dental/medical laboratories, and service providers in the field of 3D printing and prototyping.
The J850 Digital Anatomy enables the printing of complex models with multiple materials, colors, and Shore hardness values in a single print job. This makes it possible to represent anatomical structures such as bones, vessels, tissues, organs, and transparent areas in a particularly realistic manner. Typical applications include surgical planning, training, demonstration models, product development in the medical technology sector, and patient-specific models.
Technical specifications / Additional information:
Lsdpfx Aoy Urwwoiijhh
Total printing time: 675 hours
Technology: PolyJet / Multi-material 3D printing
Layer thickness: up to 14 µm
Multi-material printing with up to 7 base materials
Full-color and transparent printing possible
Software: GrabCAD Print / GrabCAD Voxel Print
Network connection: LAN / TCP-IP
Suitable for Digital Anatomy materials such as TissueMatrix, BoneMatrix, GelMatrix, and other PolyJet materials
Condition / Storage notes:
The machine is currently disassembled. Before disassembly, it was professionally flushed by Stratasys to prevent clogging or drying out of the print heads. As a result, the machine is properly prepared for transport or storage.
Special features:
Realistic haptics and appearance of anatomical models
Very high level of detail and fine surface quality
Printing of flexible, rigid, transparent, and colored areas in a single model
Ideal for medical training, surgical preparation, and product development
Industrial Stratasys quality
Large build volume for complex models and small production runs
Professionally flushed and prepared for transport/storage
This machine is particularly interesting for users who want to produce high-quality medical models, demonstrators, implant/instrument prototypes, or realistic training models.
Terms of sale:
Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with the exclusion of any liability for defects/warranty. No guarantee is provided. Errors and prior sale excepted.
Inspection possible by appointment.
Sale is ex-works.
Listing
Moerbeke-Waas
18,699 km
Articulated boom lift
Manitou150 AET JC 3D
Call
Condition: used, Year of construction: 2021, operating hours: 200 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel
Empty weight: 6.700 kg
Mast: articulated arm
Ljdpfx Aowvylreiiehh
Lifting capacity: 200 kg
Rental currency: EUR
Please contact KEY-TEC Sales for more information
Listing
Moerbeke-Waas
18,699 km
Articulated boom lift
Manitou150 AET JC 3D
Call
Condition: new, Year of construction: 2024, operating hours: 40 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel
Empty weight: 6.870 kg
Lsdpfxjywrcrj Aiiehh
Mast: articulated arm
Lifting capacity: 200 kg
Working height: 1.460 cm
Rental currency: EUR
Please contact KEY-TEC Sales for more information
Listing
Moerbeke-Waas
18,699 km
Articulated boom lift
Manitou150 AET JC 3D
Call
Condition: new, Year of construction: 2024, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel
Lhedoy Rw Hcepfx Aiioh
Empty weight: 6.870 kg
Mast: articulated arm
Lifting capacity: 200 kg
Rental currency: EUR
Please contact KEY-TEC Sales for more information
Listing
Moerbeke-Waas
18,699 km
Articulated boom lift
Manitou150 AET JC 3D
Call
Condition: used, Year of construction: 2021, operating hours: 185 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel
Empty weight: 6.700 kg
Mast: articulated arm
Lhodpfswvpd Dsx Aiijh
Lifting capacity: 200 kg
Rental currency: EUR
Please contact KEY-TEC Sales for more information
Listing
Moerbeke-Waas
18,699 km
Articulated boom lift
Manitou150 AET JC 3D
Call
Condition: new, Year of construction: 2021, operating hours: 20 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel
Lhodpfxjwwgfuo Aiieh
Empty weight: 6.700 kg
Mast: articulated arm
Lifting capacity: 200 kg
Rental currency: EUR
Please contact KEY-TEC Sales for more information
Listing
Kalletal
18,390 km
Coordinate measuring machine
KeyenceXM-5000A Keyence 3D-Messsystem
Call
Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components:
XM-5000A 3D measuring system / serial number 9031900000.
2 measuring probes.
LAPTOP for the XM production measuring system with measuring software on Windows 11.
Measuring table for the production measuring system.
User manual in German.
Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm
Lodpfxsyi E Iks Aiijhh
Measuring accuracy: (7+9L/100) micrometres
Repeatability: ± 3 micrometres
The system was only used for a specific measuring application for measuring parts in special purpose machine construction.
No use in production.
The system was delivered on 20.06.2024 directly from Keyence.
Listing
Zona Industriale
18,466 km
3d printer
StratasysFortus 450mc
Call
Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics.
The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments.
Lhedpfxjy Ug Ecs Aiioh
The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform.
Key Features:
- Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping
- Industrial-grade repeatability for functional and end-use parts
- Large build volume: 406 × 355 × 406 mm
- Dual extrusion system (model + soluble support)
- Closed material system for process stability and consistency
- Compatible with Insight software for advanced process control
Supported Materials:
🔹 Standard & Functional Polymers
ABS-M30 → robust functional prototyping
ASA → UV-resistant outdoor applications
ABS-ESD7 → electrostatic dissipative components
🔹 High-Performance Polymers
PC (Polycarbonate) → high impact resistance
PC-ABS → balance between toughness and processability
🔹 Advanced Engineering Materials
Nylon 12 (PA12) → wear resistance and fatigue durability
Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability
🔹 Aerospace-Grade Thermoplastics
ULTEM 9085 → FST compliant (flame, smoke, toxicity)
ULTEM 1010 → maximum thermal resistance and mechanical strength
Listing
Berlin
18,131 km
3d printer
DWS020D
Call
Condition: used, Year of construction: 2014, Ask for additional information! EU version.
Lsdjy Ud Ihopfx Aiiohh
Listing
Berlin
18,131 km
3d printer
DWS029X
Call
Condition: used, DWS DigitalWax 029X
Vintage: 07/2020
Laser: Class 3
Lodpfx Aoy Ud Hwoiishh
Voltage: 110–230V, 50–60 Hz
Power: 400W
Listing
Wiefelstede
18,341 km
Geared motor 2.2 kW 57.84 rpm
NordSK 2282A/3D-100LH/4 3D TF
Call
Condition: good (used), Year of construction: 2016, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor
Manufacturer: Nord, geared motor
-Transmission: Type SK 2282A/3D-100LH/4 3D TF i= 24.97
-Speed: 57.84 rpm
-Engine: Type SK 100LH/4 3D TF
-Power: 2.20 kW / 1445 rpm
-Protection rating: IP55
-Shaft: Ø 35 x 140 mm
-Number: 3x motors available
Lsdpfxjtxklgj Aiiehh
-Price: per piece
-Dimensions: 455/360/H270 mm
-Weight: 53 kg/unit
Listing
Schwerte
18,513 km
3D scanner
Scantech Digital GmbHTrackscan Sharp49
Call
Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, manufactured in 2023, with an original price of €100,000.00. Its special feature is that it allows you to digitize components without having to attach targets to the component. This is possible because targets are already located on the housing of the laser scanner and are registered by the tracker unit. This measuring device is very suitable for the rapid digitization of large components of several meters in size, while maintaining a relatively good level of accuracy.
The device was calibrated in an ISO 17025 accredited laboratory upon delivery. We recommend having the manufacturer perform a calibration upon taking possession of the device.
The scan software is included in the offer.
Optionally available is a touch probe for tactile point measurement on objects and a laptop.
An excerpt of possible application areas:
- Digitization of manufactured components for subsequent metrological evaluation, e.g. as part of initial sample tests
- Digitization of objects/spare parts for subsequent reverse engineering, e.g. for the production of a spare part or design changes
Lhedpfjw Id E Ejx Aiijh
- Digitization of larger machine systems and room areas for planning and simulation purposes
- Digitization of vehicles in the tuning sector
Technical specifications:
3 laser modes
Scan rate: Up to 2,600,000 measurements/s
Volume accuracy:
at 10.4 cubic meters: up to 0.049 mm
at 28.6 cubic meters: up to 0.067 mm
at 49.0 cubic meters: up to 0.089 mm
Recommended component size: 0.1m - 12m
Weight, tracker case fully loaded: 37 kg
Weight, scanner case fully loaded: 21 kg
Weight, tracker unit: 6.8 kg
Weight, scanner unit: 1.75 kg
The device can be inspected while powered on.
Listing
Jüri
17,116 km
Log yard machinery
Remasawco ABRS-Logscanner 3D
Call
Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair
*Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a
Ljdpfx Ast Irffsiishh
modern sawmill.
• Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration.
• Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line.
• Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be
used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes.
• Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement
Listing
Kemating
18,403 km
Industrial FFF 3D printer
HAGE3D140L-C
Call
Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer
Includes:
- 140L-C printer
- Vibration-damped platform
- License for slicing software (Simplify3D)
Original price €73,800
General Technical Data:
Model: HAGE 3D-140L-C
Year of manufacture: 2022
Lsdexuh Nyspfx Aiiehh
Operating hours: 5,854 h
Printing technology: FFF (Fused Filament Fabrication)
Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers)
Build area (L x W): 700 mm x 500 mm
Maximum print height: 400 mm
Maximum build volume: 140,000 cm³
Dimensions and Weight:
Length: 1,450 mm
Width: 1,250 mm
Height: approx. 1,040 mm
Weight: approx. 380 kg
Temperature:
Maximum printhead surface temperature: 300°C (optionally 450°C)
Maximum build plate surface temperature: 180°C
Maximum chamber temperature: 85°C
Minimum operating temperature: +10°C
Maximum operating temperature (ambient): +40°C
Electrical Data:
AC input: 400 V / 50 Hz
Power supply: 24 V DC
Connection: USB 3.0 / Ethernet
Print Specifications:
X-axis speed: up to 400 mm/s
Y-axis speed: up to 400 mm/s
Z-axis speed: up to 300 mm/min
XY-plane print accuracy: < 0.1 mm
Printer Control: Industrial controller (Sigmatek)
Software: HAGE3D
All documentation available
Platform:
1,450 x 1,250 x 600 mm (LxWxH)
Including storage compartments
Including machine feet with vibration damping
Trust Seal
Dealers certified through Machineseeker

Listing
Saffig
18,604 km
3D height measuring device, measuring system
TesaMicro-Hite 3D
Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation.
This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production.
Of particular note is the extensive range of accessories, as well as the existing PC connection with printing capability, which allows measurement reports to be created and documented directly.
Technical specifications:
Manufacturer: TESA (Switzerland)
Model: Micro-Hite 3D
Type: Height gauge / 3D-capable measuring column
Measuring range: approx. 600 mm (large version)
Resolution: up to 0.0001 mm (0.1 µm)
Drive: motorized adjustment
Measuring system: digital / electronic
Data output: interfaces for PC/peripherals
Measuring functions:
Height measurement
Internal and external measurement
Diameter determination
Distance measurement
2D/3D point measurement
Geometry and position calculations
Equipment:
Granite measuring plate
Stable machine base
Motorized measuring column
Integrated control unit
External PC workstation (monitor, computer, input devices)
Ledpfxoy Tkg Uj Aiishh
Printer for report output
Accessories:
Extensive set of measuring probes (ruby tips, extensions, etc.)
Tool holders
Accessories case / wooden box
Listing
Kootwijkerbroek
18,541 km
3d printer
EOS, Formlabs, Sinterit, Sintratec, Nexavarious SLS PA12 materials
Call
Condition: new, SLS Materials for Industrial & Compact SLS 3D Printers
High-performance SLS powders for professional additive manufacturing – compatible with a wide range of industrial and compact SLS 3D printers, including EOS, Formlabs, Sinterit, Sintratec, Nexa3D, and Raise3D systems.
Lhedpfxoy Til Ae Aiish
Our SLS powders undergo extensive in-house testing to ensure reliable processing, excellent mechanical properties, and consistent print quality across multiple machine platforms. Designed for both industrial production and compact SLS systems, IM3D materials deliver professional performance without restricting you to a specific ecosystem.
Available Materials
PA12 Balance – €45/kg
Cost-effective, all-purpose PA12 powder with excellent refresh behavior and reliable mechanical properties.
PA12 Performance – €49/kg
Enhanced PA12 material with improved elongation at break and increased impact resistance for demanding functional applications.
PA12 Glass Filled (PA12-GF) – €44/kg
Stiff, dimensionally stable PA12 material reinforced for tooling and engineering parts.
TPU88A – €45/kg
Flexible SLS material with excellent elasticity, durability, and impact resistance.
Machine Compatibility
Compatible with a broad range of SLS systems, including:
EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770
Formlabs: Fuse 1, Fuse 1+
Sinterit: Lisa, Lisa Pro, Lisa X, Suzy
Sintratec: Kit, S1, S2, S3
Nexa3D: QLS230, QLS236, QLS260
XYZ Systems: MfgPro230 xS, MfgPro236 xS
Raise3D: RMS220
SLS4All Innova MK1
Loopzizo K-100
More compatibility information:
im3d.shop/printer-compatibility
OEM Material Alternatives
We offer alternatives and/or drop-in replacements for materials from Formlabs, Sinterit, Sintratec, and Raise3D, including:
Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A
Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth
Sintratec PA12, PA12-GF, TPU88A
Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A
OEM comparison overview:
im3d.shop/compare/oem
Why Choose IM3D SLS Materials?
Broad compatibility across industrial and compact SLS systems
Excellent refresh rates and low cost per part
Stable processing and consistent print quality
Industrial-grade performance without vendor lock-in
In-house tested and production validated
Technical onboarding and support available
Fast shipping from the Netherlands
Listing
Wolkersdorf im Weinviertel
18,142 km
Probe stylies & accesories
KOMEGM5
Call
Condition: excellent (used), probes, extension, cubes and some more für M5 probing systems like
Zeiss (VAST, ST); Renishaw (SP80, MP2 usw) and Leitz (LSP, Trax)
Price min. 50% discount to list price from Komeg or Renishaw pricelist
Ledpfx Aogrtynoiijhh
Please send us your wanted probes
Listing
Hörsching
18,310 km
3d printer
StratasysObject 500
Call
Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015)
A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included.
Spare Components:
2 x polyjet print head spares (new)
2 x thermistors (bagged)
1 x new bulb
Ledpfx Asy S Rp Hoiishh
1 x used bulb (left) – 3610 hours of use
1 x used bulb (right) – 4539 hours of use
2 x Assy Wiper Leaf (used)
2 x Roller Bath Blades
Kit, Filter & Accessories – several items bagged together
1 x Eden MCB – in good condition
4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026)
The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.
We make it easier for you to find: "3d probe"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used 3D Probe (2,718)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
- 2D Measurement Machine
- 3 Axis
- 3 Axis Digital Display
- 3 Axis Machining Center
- 3 Axis Machining Centre
- 3D Cmm
- 3D Printer
- 3D Scanner
- Coordinate Measuring
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month








































































































































































































