Used 3D Probe for sale (2,760)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Gujdpfowna R Sox Aa Esd Machines ready for pickup.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Gjdpfx Ajdyah Ssa Eoud Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Gjdpfoxy R Ezjx Aa Esud

Year of construction: 2024, operating hours: 500 h, condition: excellent (used), functionality: fully functional, Here, an entire system is being sold. 1. 3D metal printer Trueprint 1000 G06, manufactured in 2024, 500 laser hours 2. Ultrasonic sieving station from Assonic 1000, 1 year old 3. Ruwac wet separator NA7-11, 1 year old 4. F 90 material storage cabinet, 1 year old 5. Used Köttermann compressed gas cylinder cabinet, the installation within the cabinet is 1 year old 6. Exhaust system for the room and for the compressed gas cylinder cabinet. The supply air of the exhaust system is equipped with a heating element and can blow in pre-heated air (for winter). All systems are fully functional and can be verified by a test run. Gujdpfozdq Rfsx Aa Eod The removal and transportation of the systems are the responsibility of the buyer.

Condition: used, functionality: fully functional, operating hours: 1,616 h, total length: 584 mm, total height: 355 mm, total width: 330 mm, type of input current: AC, overall weight: 16 kg, Sales Description For sale is a Markforged Mark Two 3D printer, one of the leading professional fiber composite 3D printers for manufacturing high-strength functional parts. The printer is in good condition and has only 1,616 operating hours. Thanks to the ability to reinforce components with carbon fiber, Kevlar® (aramid), fiberglass, or HSHT fiberglass, extremely stable and durable components can be produced. Ideal for professional use in development, prototyping, mechanical engineering, motorsports, or the manufacture of fixtures and tools. The printer processes materials such as Onyx, Nylon White, PLA, and TPU, and offers a build volume of 320 × 132 × 154 mm. The scope of delivery includes numerous accessories and consumables:  Kevlar fiber  Fiber spools  Carbon fiber (already installed)  Dry box  Black PLA spools  New blue PLA spool  Print plate  Fiber load tubes  Fiber Bowden tube  Replacement nozzles  Torque driver  L-key set and other accessories Technical Highlights  Printing process: Fused Filament Fabrication (FFF) with continuous fiber reinforcement  Build volume: 320 × 132 × 154 mm  Materials: Onyx, Nylon White, Precise PLA, TPU 95A  Fiber reinforcement: Carbon fiber, Kevlar® (aramid), fiberglass, HSHT fiberglass  Tensile strength: up to 800 MPa (comparable to aluminum components) Gsdpfx Aaezdnyqj Eoud  Elastic modulus: up to 60 GPa  Precision print bed: flatness up to 160 μm  2nd generation extruder with material monitoring and out-of-plastic detection  WLAN connectivity (802.11 b/g/n)  Industrial quality for functional prototypes and durable end-use parts The printer is ready for immediate use and is suitable for both companies and ambitious users who want to manufacture high-quality, durable components.

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Gusdpfoyxy Sdex Aa Ejd Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: used, Technical details: Gedju N Auhopfx Aa Eoud space requirements of the machine approx.: 2x Boxen: 0,85x0,55x0,40 / 0,10x0,55x0,4 m Aramis 3D Camera = robust design for high-end applications with high-resolution 3D sensor. Camera resolution 1936 x 1216 pixel Frame rate (fps) 130 fps at full resolution; 24 fps at 1/2 image height; 450 fps at 1/4 image height: Aramis Adjustable = modular and flexible measurement system for research and industry with user-friendly application. without software (only via manufacturer ) *

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 957 h, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 30 W, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, travel speed (max.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories Gujdpjy El Ansfx Aa Eod For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: complete, all original EOS components _____ Technical Specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible plastics • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / material management system • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Leering sandblasting cabin type DI-12 (for professional post-processing of components) • Ruwac industrial vacuum cleaner, type WS 200H, Zone 22 ATEX-certified (for safe handling of plastic powders) • 4x material containers • 2x build containers _____ Special Highlights: • Very low operating hours (only 957 h) → like new condition • Complete, immediately ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories are original EOS parts → perfectly matched system _____ Application Areas: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is also possible by appointment.

Condition: excellent (used), functionality: fully functional, Very comprehensive Zeiss probe set including case, in excellent condition. Gujdpfxjy Ni Snj Aa Eod Comes with various probes. All with M5 thread and shafts made of steel, ceramic, carbon fiber, star probes, etc. See pictures.

Condition: good (used), functionality: fully functional, For sale is a high-quality set of original probe heads and probe changing systems from the renowned manufacturer Renishaw. These components come from a modernization project and are ideal for expanding or as replacement parts for your coordinate measuring machine. Scope of delivery & details on the models: - Renishaw TP200 (probe head): Compact, highly precise switching probe head with strain gauge technology. Perfect for form measurements and extremely repeatable. Guedpfjzcxx Nex Aa Eed - Renishaw SCR200 (probe changing magazine): Automatic changing magazine for the TP200 probe head. Enables quick and protected changing of up to 6 probe modules. - Renishaw ACR3 (auto-joint changing system): Passive changing system for the automatic acceptance of probe heads and extensions. - Renishaw MSR1 (manual changing magazine): Practical, manual storage and changing magazine for up to 6 probe modules.

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, x-travel:1600 mm Godpfscxxwrjx Aa Esud y-travel:1000 mm z-travel:1300 mm size of plate:1.500 x 800 x 120 mm capacity Y-axis:175-1210 mm capacity Z-axis:0-810 mm digital readout:Grundig 3-achs-Digimeß digital readout:235 x 80 x 130 mm total power requirement:0,04 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,0 x 1,5 x 1,63 m 3-D coordinate-measuring machine with caste precision plate fine-scraped, with 4 feet 2000 x 1500 mm, approximately 20 different marking and testing probes, equipped with STIEFELMAYER type "A" guidance system

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm Gsdpsu N Auuofx Aa Ejud 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Guedpou N At Rofx Aa Eed Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Godpfx Aajzbvqyj Esud Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Godeibikwopfx Aa Eeud Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Gedpfx Aoqwkypoa Eoud

Condition: used, Year of construction: 2022, Koh Young Machine AL-SL-00713 1. LZALPHA L-S-20-4W-L-6.5M  1  AL-SL-00713 Zenith Alpha HS L-Size Single Lane 4W/8M L→R 20um L (Lean) Platform Platform: L (Lean) Platform (standard version) Type: Zenith Alpha, L-Size Camera Resolution: 20 microns Projection: 4-way grating projection Camera: 6.5 Megapixels Illumination: IR-RGB LED Operating System: Microsoft Windows 10 IOT Enterprise LTSC (Standard) Conveyor: Single lane Conveyor Type: Front fixed (Standard) Conveyor Belt Type: Timing belt - ESD (Standard) Conveyor PCB Transfer Height: 870–950 mm (Standard) Conveyor PCB Direction: L→R (Standard) Max. PCB Size: 490 × 510 mm (front fixed, Standard) Min. PCB Size: 50 × 50 mm PCB Thickness: 0.4–5 mm ESD: Standard + Extended Safety Option CE Declaration: English (Standard) Specification conforms to standard setup System Dimensions (W×D×H): 1000 × 1295 × 1627 mm HS Code: 9031.4990 Country of Origin: Republic of Korea 2. 803020-009105  1  to AL-SL-00713 AOI REVIEW STATION (REVIEW STATION SET, WINDOWS 10) Includes DELL XE3 PC with Windows 10, monitor, and keyboard HS Code: 8471.4900 Country of Origin: People's Republic of China 3. 101020-003007  1  to AL-SL-00713 UPS OPTION AOI_SPI (SMT750) APC – C-platform HS Code: 8504.4030 Country of Origin: Philippines Gedox Tzhpspfx Aa Eoud

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment Gjdpjdx Nfwsfx Aa Esud IPG fiber laser source 2000 watts (including cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for the production of automotive and other high-precision and complex 3D components. The system offers 25% more processing area than machines with the same concept. For flawless cutting performance, the powerful machine body and rotary table provide the best quality. Thanks to the easy-to-use design, you can save time. Due to components from well-known manufacturers and high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. With this technology, you will have lower energy consumption and can increase your company's profits. The machine is impressive due to its speed, reliability, and design. HD-FA Technical Data Available in 2, 3, and 4 kW X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360° Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm, h= 3700 mm Working area: 9,000 mm x 10,000 mm (Safe area) Distance of rotary table door: 4,000 mm Machine weight: 16,000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Gedpsg Adknsfx Aa Eoud Screen: 19-inch touch screen Filter Capacity: 2,500 m³/h - 4 kW

Condition: good (used), Year of construction: 2018, operating hours: 385 h, load capacity: 1,200 kg, lifting height: 1,350 mm, fuel type: electric, mast type: simplex, construction height: 1,850 mm, Manufacturer + model: TOYOTA SWE 120 S * EX * Miretti 3D / Zone 22 * Mast: 1F1350 ID: 26031.0053 Category: Demo Mast: 1F1350 Lowered height: 1830 mm Lift height: 1350 mm Capacity: 1200 kg Year: 2018 Operating hours: 385 hours Battery capacity: 24V / 300Ah Options: * EX * MIRETTI - E8904 System / Certificate = ATEX 00032 Gjdpfx Aaozaf Eko Ejud Gas group = IIIB Temperature class = 135°C ( = T4 ) Type = Cat 3D (approved for ZONE 22) Wide track * EX * version – with CANTILEVER adjustable forklift forks - SUITABLE for all types of pallets - Width between support legs = 1220 mm !!

Condition: like new (used), Year of construction: 2018, operating hours: 4,918 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 * ID: 24090.5905 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2018 Operating hours: 4918 hours Battery: Completely NEW * 24v / 344ah * Year 2025 Options: * EX * Atex - Pyroban !!!! Gas group = IIIB Type = 3D (approved for ZONE 22) Guodpfx Aajzaf Ace Esd Temperature class = T4 (135°C)

Condition: like new (used), Year of construction: 2016, operating hours: 570 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,670 mm, Manufacturer + model: STILL EXV 14 * EX * Miretti - 3D / Zone 22 Mast: 2F2350 ID: 23121.4034 Gujdjzafpiepfx Aa Eed Category: Demo Mast: 2F2350 Lowered height: 1670 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2016 Operating hours: 570 hours Battery: Completely NEW 24V / 375Ah * year 11/2023 Options: * EX * MIRETTI !!!!! System = Miretti AR 16 ATEX 015 Gas group = IIIB Temperature class = 266°C Type = Cat 3D (approved for ZONE 22) POWER STEERING Complete LIKE NEW !!

Condition: used, functionality: fully functional, Year of construction: 2019, type of input current: AC, input voltage: 240 V, input current: 13 A, input frequency: 60 Hz, We are offering this used 3D printer Stratasys Objet350 Connex3, year of manufacture 2019. Model: Objet350 Connex3 Serial Number: 370192 Gujdpfoyzq Nlsx Aa Esd Year of Manufacture: 2019 Supply Voltage: 100–120 V Supply Voltage: 200–240 V Rated Current: 13.5 A Rated Current: 7 A Frequency: 50–60 Hz Number of Phases: 1 Short-term Peak Current: 1000 A If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Gujdpfxjy Uzcie Aa Eed Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced. The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality. After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options. Condition: Defective / in need of repair. Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company. Technical data according to the manufacturer's specifications for the Objet500 series: Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 micrometers Gsdey Uwlaopfx Aa Ejud Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Weight of material cabinet: approx. 76 kg Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm. Note regarding the defect: The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts. Terms of sale: Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change. Inspection possible by arrangement. Sale takes place at the location.