Used 2 X Engel Es 600 125 Art 597 for sale (254)

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Podpfx Aozvdbuef Sogt Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm Pedpfezxy Szsx Af Ssgt • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Pedpfx Afsxgi Etj Segt Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Pedpfsu Eu Tnjx Af Ssgt Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Pgjdpsy Au I Usfx Af Sot Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Pgedpszqbk Njfx Af Sjt

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 Pgedpfx Afezlgi Ho Set • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Clamping force: 125 tons Tie bar diameter: 35 mm Tie bar diameter: 30 mm Injection volume: 158 cm³ 98 cm³ Psdpfx Ajlu Hkiof Sogt Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 9,806 kN, screw diameter: 105 mm, displacement volume: 4,160 cm³, opening stroke: 1,100 mm, No reserve price – guaranteed sale to the highest bidder! Engel injection moulding machine with Engel ERC 83/2 - CL robot! TECHNICAL DETAILS Clamping force: 1,000 tons Screw diameter: 105 mm Injection volume: 4,160 cm³ Locking force: 1,100 tons Opening stroke: 1,100 mm Tie bar spacing: 1,400 x 1,150 mm MACHINE DETAILS Number of heating zones: 7 Pump drive power: 130 kW Machine weight: 64 t + 18 t EQUIPMENT Engel ERC 83/2 - CL robot Separate control cabinet Note: For the purchase of multiple items from the same location (see offers below), you will benefit from reduced costs for dismantling and loading. Pjdpfjy Ew Aaex Af Segt

Condition: good (used), Year of construction: 2011, ENGEL Victory 200/50tech with integrated Robot Viper 12 Pedpfxezmg Rmj Af Sogt Control panel : CC200 Core pull 2-fold - movable clamping plate Hotrunners 16 circuits. Nozzle orifice 12mm Multi-level conveyor belt, ENGEL safety guards for robots. Technical Specifications: 1. Machine model: ENGEL VC 200/50 Tech 2. Clamping force: 500 kN (50 tons) 3. Opening stroke: 408 mm 4. Ejector stroke: 100 mm 5. Ejector force: 39.8 kN Injection Unit (30 mm screw): 1. Screw diameter: 30 mm 2. Max. swept volume: 99 cm³ 3. Max. screw speed: 480 rpm 4. Injection rate: 144 cm³/s 5. Increased injection rate: 95 cm³/s 6. Specific injection pressure: 1451 bar 7. Increased specific injection pressure: 2205 bar 8. Nozzle stroke: 230 mm 9. Nozzle contact force: 28.3 kN

Condition: excellent (used), Year of construction: 2015, Engel VIPER 20 (2015) X axis demolding stroke - 700 mm Pedpfsxy Rarjx Af Sjgt Y axis traverse stroke - 1500 mm Z axis traverse stroke - 2360 mm X axis reach from fixed platen - 925 mm C axis pneumatic swivel axis - yes Nominal payload - 25 kg IMM clamping force - 55-340 US tons

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Pgjdpsy Iwlasfx Af Sst Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Psdpfxszzv Tgj Af Sjgt Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm Pedpowp E Hzofx Af Sjgt

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) Pgsdpfem Nclvsx Af Set - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Psdpfxozx Uc Ij Af Sogt Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, Controll : CC200 Clamping force: 260 t Screw dia: 40 mm Type: Multicomponent Drive: Hydraulic Rotary table Machine is including robot and conveyor belt Pedezu Smiopfx Af Ssgt Robot: ERC 23/1-F machine is in excellent condition

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Pgjdpex D Dkxefx Af Sot Application Types Injection Moulding

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 price: 8.900€ Pgodogkvtxopfx Af Sst contact person: Mr. Rainer Eckerle

Condition: used, Year of construction: 1993, Engel ES 80/50 HL (1993) Podjzu R Hzopfx Af Sogt

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Pedpjigrinjfx Af Ssgt Closing force: 125 tons Multi-component injection molding machine Control system: CC100 Cylinder H: 35 Cylinder V: 18 1x Hydraulic core pull unit, BAP 1x Proportional hydraulic indexing plate connection, BAP 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Pedpfx Aszrngyef Ssgt Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Pgedpsxg H Hbefx Af Sot Typ: VICTORY 80/25 TECH Baujahr: 2004 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2006, _M 46_ _Engel VC 1050/220 HL_ Clamping force: 220 t Year of manufacture: 2006 Control system: CC 200 Screw diameter: 55 mm Screw type: POM Min. mold height: 300 mm Pedpfezu R H Uex Af Sjgt Max. opening stroke: 750 mm Max. platen distance: 1,050 mm Ejector stroke: 180 mm Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Pgsdpfx Afezy Iwhs Set Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request