Cnc lathe

Microcut

Condition: good (used), Year of construction: 2008, CNC Vertical Machining Center MICROCUT MC 800 B, year 2008, equipped with FARGO 8055M. Spindle taper ISO 40 Maximum spindle speed: 6,000 rpm Travel: X 800 mm, Y 400 mm, Z 450 mm Table: 850 mm x 450 mm Hfsdpfsyhzkisx Ad Ujc Tool magazine with 20 positions Good condition, demonstration possible, machine documentation available.

Condition: excellent (used), Hello, Hfedpfxeitcq Ts Ad Usc we offer used Erowa PalletSetW vices. They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

Condition: used, Year of construction: 2017, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 60 kVA, controller manufacturer: Heidenhain, controller model: TNC530i, rotary table diameter: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,940 h, coolant supply: 20 bar, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used Microcut 5-axis MCU-5X vertical machining center, year of manufacture 2017. Model: MCU-5X Serial number: 172822005 Power: 60 kVA Frequency: 50 Hz Weight: 9,000 kg Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit capacity: 25 kA Maximum load current: 200 A Hfsdeykiwlopfx Ad Uoc Fuse protection / rated current: 80 A Date of manufacture: May 2017 + Chip conveyor If you have any questions or require further information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, total height: 2,700 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, product length (max.): 5,440 mm, number of axes: 3, This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine. • Table dimensions: 1.500 x 660 mm • Max. table weight: 1.000 kg • X/Y/Z rapid traverse: 20 m/min • Tools station: 24 positions • Max. tool diameter: 80 mm (150 mm) Hjdpfoyg Hapsx Ad Uefc • Max. tool length: 300 mm Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2002, Technical details: Hfsdexhqqmopfx Ad Uoc turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Hfjdpfx Adexr Nvis Usc

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 Hodpfsu Idfrsx Ad Ujfc total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm Hfsdpfx Adjww Nazs Ujc no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V Hjdpfx Aetvf Htjd Usfc - Weight: 3140 kg

Condition: used, Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, controller manufacturer: Siemens, Equipment: rotational speed infinitely variable, Ref. 5.3-787 1 used vertical machining center Microcut Challenger MCV2418, year of manufacture 2008 Hjdewwi H Iopfx Ad Ujfc CNC control Siemens 24-position tool changer chip tray Technical data: X-axis travel: 610 mm Y-axis travel: 455 mm Z-axis travel: 520 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Table clamping area: 762x363 mm Tool magazine positions: 24 Weight approx.: 3200 kg Technical data, accessories, and machine description are non-binding.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol Hfjdpfx Aswz Hf Nsd Ujc - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange.

Condition: used, Year of construction: 2005, Weight 350 kg Hfsdpfx Adowg Huuo Uoc Dimensions (L/W/H) 1930,0 × 1850,0 × 2490,0 mm x-axis 610 mm y-travel 305 mm z-travel 520 mm table length 760 mm table width 360 mm

Condition: excellent (used), Working travels 1800 x 800 x 700 mm Table size 1960 x 750 mm Spindle taper SK50 Spindle speeds -6'000 rpm Tool changer 24 Pos. SIEMENS 828 D control Hfedpfx Adeivzims Uoc RENISHAW TS-27 RENISHAW MP12 Misc.accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, GÖCKEL G50 ELTT Precision grinding machine Hsdpfsv D Huqsx Ad Ujfc Year of manufacture: 2005 Magnetic table length: 4500 mm, width: 150 mm CNC controlled Operational

Condition: excellent (used), Year of construction: 2004, Model: BNC-1840 Control: FAGOR 8055 FL Year: 2004 Swing over Bed: 475mm Distance between centres: 1000mm Spindle Speeds: 100 – 4500 RPM Spindle Bore: 65mm Machine with: Quick Change Toolpost Hsdpfjv Rxglex Ad Uofc Filtermist Unit 3-jaw chuck Dimensions: 3000 x 1850 x 2000mm high Weight: 3000 kgs