Lynette

MFD - HOESCH

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 Fgjdpfot Ei Hujx Ah Esi 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: used, Year of construction: 1980, turning diameter over bed 1930 mm turning diameter over slide rest 1520 mm turning length 5000 mm turning speeds 0,5-250 U/min Fedpfx Ahjyutp Hs Eegi spindle bore 105 mm workpiece weight 35 t steady 400-700 mm steady 700-1200 mm steady 1000-1600 mm control Siemens total power requirement 106 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1972, swing diameter 2200 mm centre distance 9500 mm turning diameter over bed 2200 mm workpiece weight 70 t turning speeds . U/min 4-jaw-chuck diameter 2100 mm control Siemens type Sinumerik 850 T mm transmission ratio . total power requirement . kW weight of the machine ca. . t Single Carriage Tailstock Hydrostatic Bed Chip Conveyor Serial Number: 27486 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Fjdpezbc Apofx Ah Ejgi than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 2000 mm turning diameter over slide rest 1050 mm Fgjdpfx Ahoyuqflj Eji turning length 7000 mm speed 1,6 - 250 U/min voltage 380 V

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm Fedpfx Ajx Uw S Hoh Ejgi with steady rest with digital readout (DRO) with thread cutting function

Year of construction: 2017, condition: good (used), Railway lahte HOESCH MFD - DRH 1400 N2D MACH-ID 9089 Make: HOESCH MFD Type: DRH 1400 N2D Control: SIEMENS 840D Fgedpfxowb Aq Uj Ah Eoi Year: 2017 Doubled support carriage CNC controlled measuring and correction probe Chip conveyor internal and external clamping jaws (wheel clamp in and out) overhauling cost 850k EUR Under power free 02.2026 Rail track gauge: 1435mm Max. wheel tread Ø: 1600mm Min. wheel tread Ø: 200mm Max. axle length wheel set:2065mm Face plate Ø: 1400mm Number of slides: 2 Sjablone copy attachment: 2 Power: 55+55kW Length: 9200mm Width: 6800mm Height: 3800mm Weight: 47000kg

Condition: used, turning diameter over bed 2100 mm turning diameter over slide rest 1300 mm turning length 6800 mm workpiece weight 25000 kg main drive motor 140 kW Control Siemens type 840 C faceplate 1100 mm bed width 2500 mm steady 800 mm steady 800 mm steady 800 mm steady 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Fedpfx Ahjyt Rzks Eegi Your Markus Hirsch Team

Condition: as good as new (ex-display), JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. Fgodpfeh Upyhox Ah Eoi JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK contact us for the possibilities We supply both new and used

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Rotary table clamping surface: 2200 x 1800 mm Fgsdpfxjyar D He Ah Esi Extra Information Working spindle diameter: 130 mm Technical Specification Taper Size ISO 50

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 12428 B500-851, Overheadcrane ± 14.170 mm x 25.000 kg Fedpfxjv Ip Afs Ah Eogi