BS 260G Metal Cutting Band Saw

Metal Technics Polska PRZECINARKA TAŚMOWA DO METALU BS 260G

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Cutting angle up to 60° Lhodpfxswaauuo Afasf Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile. Ledpfoupw R Nex Afaehf

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally Lhodjudi Uzopfx Afaef 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Lhjdpfji D Ddijx Afasf

Condition: new, PILOUS Double miter band saw ARG 260 plus E Incl. special accessories: driven chip brush, band tension indicator. Cutting range: Round:90° -45° +45° +60° Lhedjilqd Nspfx Afaof in mm.260-180-200-125 Square:90°-45°+45° +60° in mm. 240-160-185-105 Rectangle:90°-45°+45° +60° in mm. in mm.300 x 185-190 x 105-185 x 295-125 x 105 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm Working height from vice 900 mm Coolant tank approx. 15 l Machine dimensions (min.) 1690 x 750 x 1430 mm Machine dimensions (max.) 1980 x 1510 x 2040 mm Machine weight 310 kg

Condition: new, Year of construction: 2026, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Lodpfsxdbzbex Afajhf Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: used, Year of construction: 1999, capacity 90 degrees: round 260 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 400 x 260 mm 250 mm 240 x 240 mm 240 x 260 mm 250 mm 250 x 250 mm 290 x 250 mm capacity 60 degrees: round 160 mm Ledpfx Afeyv Npmjaehf capacity 60 degrees: square 160 x 160 mm capacity 60 degrees: flat 110 x 260 mm 190 mm 190 x 190 mm 210 x 190 mm dimensions of the machine ca. 1700x2000x1600 mm weight of the machine ca. 960 kg

Condition: ready for operation (used), Year of construction: 2007, Manual light metal circular saw Metallkraft LMS 400 - Working condition Lhsdpfx Asx Tz R Djfajf - Year of manufacture: 2007 - Spare saw blade included - Can be tested on-site under power - Shipping via freight company available at extra cost - On-site loading with forklift - Invoice with VAT included