Vertical machining centerMazak
VTC-20C
Vertical machining center
Mazak
VTC-20C
Year of construction
1998
Condition
Used
Location
Poland 

Basic data
- Machine type:
- Vertical machining center
- Manufacturer:
- Mazak
- Model:
- VTC-20C
- Year of construction:
- 1998
- Condition:
- good (used)
Price & Location
- Location:
- Kłudzienko 7, 05-825 Grodzisk Mazowiecki, Polska

Call
Details about the offer
- Listing ID:
- A18364536
- Update:
- 28.10.2026
Description
Vertical Machining Center Mazak VTC-20C
The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it.
In 2025, the spindle of the MAZAK VTC-20C was overhauled.
Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask.
Specification | Value
---|---
X-axis travel | 1,660 mm
Y-axis travel | 510 mm
Z-axis travel | 510 mm
Distance from table surface to spindle nose | 180–690 mm
Distance from column front to spindle centerline | 550 mm
Working table area | 2,000 × 510 mm
Maximum table load (uniform load) | 1,000 kg
Spindle speed | 40–7,000 rpm
Spindle motor power – 10 min rating | 11 kW
Spindle motor power – 30 min rating | 7.5 kW
Spindle motor power – continuous | 5.5 kW
Spindle taper | 7/24 taper No. 40
X-axis rapid traverse | 24,000 mm/min
Y-axis rapid traverse | 24,000 mm/min
Z-axis rapid traverse | 20,000 mm/min
X-axis cutting feed rate | 1–5,000 mm/min
Y-axis cutting feed rate | 1–5,000 mm/min
Z-axis cutting feed rate | 1–5,000 mm/min
Tool magazine capacity | 24 tools
Tool selection system | Tool holder No. fixed-address system (automatic short-cut system)
Tool shank | NT-40
Hfodpfxjvurd Ej Af Tjp
Pull stud bolt | Yamazaki-made ANSI type
Maximum permissible tool diameter | Ø80 mm
Maximum tool diameter with adjacent pocket empty | Ø110 mm
Maximum permissible tool length | 350 mm (from gauge line)
Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt)
Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools)
Machine weight | 7,215 kg
Machine height from floor | 2,701 mm
Required floor area | 4,000 × 2,990 mm
The listing was translated automatically. Translation errors are possible.
The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it.
In 2025, the spindle of the MAZAK VTC-20C was overhauled.
Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask.
Specification | Value
---|---
X-axis travel | 1,660 mm
Y-axis travel | 510 mm
Z-axis travel | 510 mm
Distance from table surface to spindle nose | 180–690 mm
Distance from column front to spindle centerline | 550 mm
Working table area | 2,000 × 510 mm
Maximum table load (uniform load) | 1,000 kg
Spindle speed | 40–7,000 rpm
Spindle motor power – 10 min rating | 11 kW
Spindle motor power – 30 min rating | 7.5 kW
Spindle motor power – continuous | 5.5 kW
Spindle taper | 7/24 taper No. 40
X-axis rapid traverse | 24,000 mm/min
Y-axis rapid traverse | 24,000 mm/min
Z-axis rapid traverse | 20,000 mm/min
X-axis cutting feed rate | 1–5,000 mm/min
Y-axis cutting feed rate | 1–5,000 mm/min
Z-axis cutting feed rate | 1–5,000 mm/min
Tool magazine capacity | 24 tools
Tool selection system | Tool holder No. fixed-address system (automatic short-cut system)
Tool shank | NT-40
Hfodpfxjvurd Ej Af Tjp
Pull stud bolt | Yamazaki-made ANSI type
Maximum permissible tool diameter | Ø80 mm
Maximum tool diameter with adjacent pocket empty | Ø110 mm
Maximum permissible tool length | 350 mm (from gauge line)
Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt)
Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools)
Machine weight | 7,215 kg
Machine height from floor | 2,701 mm
Required floor area | 4,000 × 2,990 mm
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Registered since: 2019
10 listings online
Send inquiry
Telephone & Fax
+48 530 8... show
These listings may also fit your interest.
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Bayern
18,561 km
Vertical machining center
MAZAKVTC 20 C
MAZAKVTC 20 C
Success:
Your message has been sent.
Listing
Babberich
18,541 km
Rotary table Haas - HRT 310
HaasHRT 310
HaasHRT 310
Success:
Your message has been sent.
Listing
Teningen
18,739 km
Vertical machining center
MazakVTC 20C
MazakVTC 20C
Success:
Your message has been sent.
Listing
Zevenbergen
18,629 km
Vertical machining center + NC table
MazakVTC 20C
MazakVTC 20C
Success:
Your message has been sent.
Listing
Germany
18,634 km
Machining Center - Vertical
MORI SEIKIMV 40B mit kompl. Werkstatt/with compl.tool shop
MORI SEIKIMV 40B mit kompl. Werkstatt/with compl.tool shop
Success:
Your message has been sent.
Auction
Auction ended
Germany
18,384 km
Vertical machining center
MAZAKVTC 20 C
MAZAKVTC 20 C
Success:
Your message has been sent.
Listing
Günzburg
18,561 km
Machining centre
MAZAKVTC 20 C
MAZAKVTC 20 C
Success:
Your message has been sent.
Listing
Neukamperfehn
18,359 km
Wide span rack
Kommissionierwagen/ H: 2.150 x L: 1.550x T: 600 mm / 3 Ebenen
Kommissionierwagen/ H: 2.150 x L: 1.550x T: 600 mm / 3 Ebenen
Success:
Your message has been sent.
Listing
Matelica (MC)
18,521 km
Machining Centres - 5-Axis
FPT IndustrieSTINGER
FPT IndustrieSTINGER
Success:
Your message has been sent.
Listing
Mindelheim
18,568 km
Universal machining center
Deckel MahoDMU 50 T
Deckel MahoDMU 50 T
Your listing has been deleted successfully
An error has occurred


































































































