Horizontal machining center

Mazak NEXUS 8800II

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Ksdpfetx Dn Usx Ahbedu

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Kdedpfszkbirox Ahbeu Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg. Kdsdpfx Ahotpp H Nebsu

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 550 mm, turning diameter: 350 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 1,755 mm, total length: 3,130 mm, total width: 1,643 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 4,800 kg, swing diameter over bed slide: 550 mm, chuck outer diameter: 203 mm, center width: 668 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-TB, Doosan Puma 240C (2012 Model) Heavy-Duty Boxway CNC Lathe Ksdozluq Eepfx Ahbjdu Short Overview Available for sale is a production-ready 2012 Doosan Puma 240C CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory "C" Big-Bore package, this lathe pairs a large 8-inch chuck capability with a 3-inch through-hole bar capacity, making it an ideal choice for high-mix job shops and mid-sized turning applications. Key Selling Points for Buyers Compact Footprint: Delivers heavy-duty boxway rigidity without taking up excessive floor space. Big-Bore Throughput: Handles up to 3-inch bar stock, matching the material capacities of much larger machine classes. Box Guideway Precision: Offers exceptional tool life and dampening for aggressive roughing cuts on tough alloys.

Condition: as good as new (ex-display), Year of construction: 2022, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, UK Delivery Only Global S Green 07.07.05 Shop Floor - additional bellows on the X & axis HH-AS8-T5 Automatic Indexing Probe Head (5° increments) HP-THDe High Definition Touch Trigger Probe Year of Manufacture: 2022 ISO 10360-2:2009: MPE(E0/E150)1) [18-22°C] 1.5+ L/333 MPE(E0/E150)1) [15-30°C] 1.5+ L/263 Kdedpfxozimrvj Ahbeu

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] Kdedpfxsxur E Se Ahbsu - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Kjdpfowkg T Sex Ahbjdu Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 Kdedpowix Hhsfx Ahbju workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm Kdsdpfevwgmgsx Ahbju taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Kdodpfx Aszn Iucjhbeu Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head