Saülnbohrmaschine UNIMAX4BASIC

MAXION UNIMAX 4 BASIC

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark Kljdjfg U Tqopfx Ancer

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Kodpfx Anjthd Shscolr Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Continuous drilling capacity in St 60: 35 mm Normal drilling capacity: 40 mm Tapping capacity: M 30 spindle: MK 4 feed infinitely variable: 20 - 400 mm/min drilling depth programmable: 175 mm throat depth: 300 mm distance spindle/table: 70 to 830 mm table surface: 550 x 400 mm column diameter: 120 mm total height: 1.980 mm weight: 450 kg motor pole-changing: 1,5 / 3,0 kW spindle speeds stepless range A: 120 - 2.500 rpm Spindle speeds infinitely variable Range B: 60 - 1,200 rpm Kljdpfx Anob Nbvgecer

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Ksdpfx Anofu Ivzocolr Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Kodpfx Anoda Nqxocelr Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Kedpfjrz Rw Rex Ancelr Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: good (used), Threaded snowing machine Hahn and Goebel HG 12E Kjdjd Rkbrspfx Ancolr Spindle rotation 180-900 rpm 380v MaschNr.1917/16 M4-M65

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection Kedpfx Ansfg U Tiocjlr - Star grip - 230 volt mains connection

Year of construction: 2000, condition: used, Used filterless hopper loader Kledpedlpynjfx Ancsr

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Kodpjuiwu Hefx Ancolr Robust, safe, and ready for versatile applications! This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! We also offer rent-to-own and leasing options for this sandblasting container. For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.