Vertical turning lathe

MASSA VL-1200

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Gjdpsgu U Itjfx Akyjbu Used, untested robot. No technical documentation available. Not tested.

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Brand new Spindle installed as end of April 2026 Gsdpfxey Skmro Akyjbu

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Gbjdpfxozkpups Akysu Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. Gedpfjyft S Asx Akysbu - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: Gbodpfxoy Dqb Te Akyeu - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: used, Technical details: turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg Gjdjx Ngzyjpfx Akysbu bed width: 4000 mm 2 steadies *

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Gedpfx Akouz If Neyebu Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, For sale is a very well-maintained 5-axis simultaneous machining center, DECKEL MAHO (DMG MORI) type DMU 60 monoBLOCK, manufactured in 2009. The machine is characterized by very low spindle hours and extensive equipment. Highlights & General Information: Manufacturer / Model: DECKEL MAHO (DMG MORI) DMU 60 monoBLOCK Year of manufacture: 2009 Control system: HEIDENHAIN iTNC 530 Operating hours: approx. 30,000 h Spindle hours / program runtime: approx. 8,000 h Technical Data: Travel ranges: X = 730 mm Y = 560 mm Z = 560 mm 4th axis (B-axis / swivel head): +30° to -120° (NC swivel milling head with hydraulic clamping) 5th axis (C-axis / rotary table): 360° (endlessly rotating NC rotary table, resolution 0.001°) Main spindle: Max. 12,000 rpm Tool holder: SK 40 Tool changer: 60-position chain magazine Equipment & Accessories: Internal coolant supply (IKZ) including paper band filter system Chip conveyor Workpiece measuring probe: DMG TS 649 Complete documentation and machine keys available Upon request, for an additional charge, loading and transport (throughout Europe) can be arranged. All prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Godpfozz Snyex Akyjbu Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: good (used), functionality: fully functional, turning length: 5,200 mm, turning diameter over cross slide: 940 mm, turning diameter: 900 mm, spindle bore: 204 mm, torque: 3,000 Nm, bar passage: 204 mm, total height: 3,600 mm, total length: 10,820 mm, total width: 3,381 mm, collet bore: 450 mm, spindle nose: ASA 15, overall weight: 39,000 kg, MULTITASKING Siemens 840 CNC retrofit in 2018 Diameter on the bench 940 mm Turning diameter over the entire length 900 mm Distance between centers 5200 mm Tilting milling head + - 90° Torque 3000 Nm Axial force 60 Kn Turning head Chain tool change 48-place HSK 100° Spindle taper ASA 15 Bar passaging 204 mm Tailstock CM6 Tailstock diameter 195 mm Tailstock stroke 285 mm Automatic rest Autoblock 50-450 Chip conveyor Dimensions: 10820 x 3381 x 3600 mm Weight 39.000 kg Gsdpfx Asryvxhokyobu USED MACHINE

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Gbedjwbginepfx Akysu Weight of the machine, kg: 27’000