Panel sizing circular saws MARTIN T 73 Classic

MARTIN T 73 Classic

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Itjdpsv S Uz Ijfx Aktjg Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Itedpfjyyap Eex Aktjg

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device very good condition Itodpfxjinunqj Aktog Max cutting height: 2200mm Max cutting length: 4200mm Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Weight: 850kg

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Isdpfx Akowftb Sotetg

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Isdpfx Akjvzhdzetstg

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Itsdsyuld Aopfx Aktsg Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2540x2900x850 mm Weight 1200 kg Itsdpfxsvz E Ikj Aktjg Total power requirement 5,5 kw

Condition: used, cutting width 380 mm Cutting height 85/40 mm Itsdpfjwqphljx Akteg machine weight ab. 50 kg Combined pull-through and table saw Graule AGT. The pull-through saw can be tilted and swiveled. The machine can also be used as a pull-through saw only by removing the table.

Condition: ready for operation (used), A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible. Itodpfxoy H I Ezo Akteg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 443 h, Format 4 Panel Saw Kappa 550 e-motion - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scoring unit operation indicator - Crosscut fence 3200 mm, swivels 90°–45°, with 2 flip stops - Outrigger table 1250 x 650 mm - “X-Roll” sliding table, cutting length 3200 mm, mitre fence shoe - Electrically positioned rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard, hood for 90° cuts and hood for angle cuts, both height adjustable and can be swung out of the working area - e-motion control system with 15" color touchscreen, operating panel at eye level. USB interface and network connection prepared, adjustable & swing-away from the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Electrically positioned height & angle adjustment 0°–46° - Circular saw with table extension up to 1200 mm behind the saw axis, powder-coated steel Itedew Tfahopfx Aktjg - Weight: 1300 kg - Scoring unit operation indicator (duplicate in original) - Total operating hours: 443.47 h - Including many as-new saw blades and groove cutter blade Price ex location Transport available at additional cost!