MAPLAN MFT 750/160 edition S

MAPLAN MFT 750/160 edition S

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Bjdpeilhfcjfx Amrjdh

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. Bdsdpfeyuu Scex Amrsh We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Bjdpfx Aovxh Iuomrsdh Weight: 2,900 kg Immediately available from stock

Condition: repair required (used), Year of construction: 2003, Rubber injection molding machine, REP brand 25 tons Year: 2003 All four columns need to be replaced (estimated cost: €9,000). Bodpjizi H Hefx Amredh

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Bdjdpfx Amoy E I Awjrjh Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Bedpfx Amezgvxysredh Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Bdodpfx Ajxrf Nrsmrsh

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 466EIF712N14 / V47Y10D94502002, clamping force: 1,800 kN, Two REP injection molding machines with platen dimensions 510 x 430 mm, clamping force of 180 t, and injection capacity of 670 cm³. The first machine requires piston repair and seal replacement. The second machine is missing the hydraulic pump, pressure control valve, and control program card. Bdjdpfjyb Rw Ujx Amroh

Condition: ready for operation (used), Year of construction: 2005, Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement. Bodpfxjy Ulmrj Amrjdh

Condition: ready for operation (used), functionality: fully functional, Rubber extrusion line for production of rubber extrusion profiles Bdsdeyn Ec Eopfx Amrjh