Punching automaton - transfer press

Manzoni T6302MR/2/12/TE

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Nodpfez Dxiaex Ab Aodc Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Maximum bending length: 6100 mm Bending force: 400 tons Motor power: 30 kW Voltage: 380 V Oil capacity: 400 liters Nedpoyr N Rbefx Ab Asdc Dimensions (L x W x H): 7750 x 2850 x 3400 mm Weight: 31750 kg

Year of construction: 1998, condition: used, Speed: 12.5-2000/min, with documentation. An on-site inspection is possible. Njdpfxoz Da I Re Ab Aodc

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Ndsdpfx Aex Uw S Hob Asc Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: used, Year of construction: 2010, Technical details: pressure: 80 t chamfer lenght: 2500 mm distance between columns: 2125 mm max. ram stroke: 200 mm plate thickness: 6 mm total power requirement: 9 kW operating pressure: 275 bar throat: 420 mm ajustment speed: 100 mm/s working feed: 10 mm/s weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,8 x 2,4 x 2,95 m NC pressbrake, controlled axis: Y1, Y2, X1, R with toolcabinet incl. accessories, barely used! Ndedozpaqfjpfx Ab Aec *

Condition: used, Year of construction: 1978, turning diameter over bed 1450 mm turning diameter over slide rest 1000 mm turning length 8000 mm spindle bore 160 mm turning speeds 2,8-560 U/min faceplate 1400 mm Ndjdoyqvwlopfx Ab Aoc bed width 850 mm turning diameter in the gap 1800 mm length of gap 600 mm steady 1070 mm steady 1070 mm steady 650 mm Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Ndsdpfx Abszguume Ajc Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, spindle bore: 84 mm, turning diameter: 1,000 mm, turning length: 5,000 mm, quill stroke: 300 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, swing diameter over cross slide: 600 mm, faceplate diameter: 1,000 mm, The lathe is in excellent condition, under power. It is equipped with steady rest. Manufactured by Ryazan (Russia) Work piece diameter, mm 1000 Work piece length, mm 5000 Ndedexwuw Njpfx Ab Aec Spindle rotation speed, rpm 5 – 500 Spindle bore diameter, mm 84 Metric threading, mm 1 – 120 Inch threading, thread/inch 28 – 1/4 Module threading, module 0,5 – 30 Quill taper Morse 5 Quill movement, mm 300 Motor capacity, kW 22 Machine weight, kg 15750 Machine dimensions, mm 6140 x 2200 x 1760

Condition: good (used), Year of construction: 1974, Type / model: 16K20 Control: conventional Ndedpfsvug Dtox Ab Asc Center distance: 750 mm Passage: 55 mm Center height: 220 mm Turning diameter over bed: 440 mm Speed range: 12 to 1,600 rpm Feed: Connection: 10 kW Accessories/equipment: Condition: good Weight: approx. 2.4 t Dimensions: 2,600 x 1,200 x 1,700 mm

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Nodpfxezka H Ao Ab Asdc