Used Baumann Egx 80L/16/40 St for sale (44,493)

Condition: used, functionality: fully functional, machine/vehicle number: 9777, Year of construction: 2019, operating hours: 1,752 h, load capacity: 7,000 kg, lifting height: 4,500 mm, free lift: 695 mm, fuel type: diesel, mast type: duplex, construction height: 3,240 mm, power: 70 kW (95.17 HP), fork carriage width: 1,520 mm, fork length: 1,400 mm, empty load weight: 12,550 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,200 mm, Sideload forklift Chassis number: 9777 Load center: 700 Fork width: 200 mm Prodsx Ekzpspfx Adljc Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Refurbished with warranty Technical condition: good Front tire type: Pneumatic Front tire size: 355/65-15 Front tire condition: New Rear tire type: Pneumatic Rear tire size: 355/65-15 Rear tire condition: New Fork positioner Hydraulic tilting carriage Heater, full cab, CE certificate, joystick 2 working lights on mast, 4 load posts H 1,800 mm, platform in plywood (anti-slip coated panels)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Prsdpfxoz D Dnbj Adloc Year of manufacture: 1995 Serial number: 22764 Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm

Condition: used, functionality: fully functional, machine/vehicle number: 11179, Year of construction: 2023, operating hours: 290 h, load capacity: 7,000 kg, lifting height: 6,300 mm, free lift: 2,065 mm, fuel type: electric, mast type: triplex, construction height: 3,090 mm, fork carriage width: 1,520 mm, fork length: 1,400 mm, empty load weight: 13,300 kg, total length: 4,800 mm, drive type: Elektro, construction width: 2,270 mm, Electric sideloader Chassis number: 11179 Load center: 700 mm Prsdpfx Aeyhm H Sedlsc Fork width: 200 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Refurbished with warranty Technical condition: Very good Front tire type: Pneumatic Front tire size: MICHELIN XZM Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: MICHELIN XZM Rear tire condition: 80 - 100% Battery voltage: 120V Battery capacity: 930Ah Battery manufacturer: Hawker Battery type: PzS Battery condition: 80 - 100% Description: Available immediately! Demonstration/Exhibition machine. Price is ex works, plus freight costs. Front work lights, heater, full cab, CE certificate, interior mirror, joystick, LED, VRS extension system (22), hydraulic fork adjustment, auxiliary hydraulics 1+2, rear-view camera system, LED work lights right and left on the mast, additional step in front of the cab, BEGE comfort seat, painted in Baumann yellow.

Condition: used, CTS Type: CW-40/16 Psdpfszd R A Uex Adlorc CTS Climate Chamber, Climate Testing Cell, Water-Cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: 14960 liters Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 - ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 Refrigerant: R404A Weight: 5500 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2045 x 900 x 1685 m Prsdpfx Adoztfw Eeloc

Year of construction: 2017, condition: used, Year of manufacture: 2017 New: No Part suitable for: trucks Pedpoy Rdutofx Adlerc Price: On request VAT/margin scheme: VAT deductible Type number: 1681816

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,874 h, load capacity: 5,000 kg, lifting height: 7,510 mm, free lift: 2,500 mm, fuel type: electric, mast type: triplex, construction height: 3,480 mm, fork carriage width: 1,560 mm, fork length: 1,400 mm, empty load weight: 12,170 kg, total length: 5,000 mm, drive type: Elektro, construction width: 2,220 mm, Electric sideloader Load centre: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Pneumatic Front tyres size: 32x12.1-15 Rear tyres type: Pneumatic Prsdpfxswqtfzj Adlsc Rear tyres size: 32x12.1-15 Battery voltage: 120V Battery capacity: 750Ah Battery year: 2019 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase and financing at favourable terms are always possible with us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice about this EGX50/14/75TR. P.S.: Our master forklift workshop specialises in repair, servicing, reconditioning and special builds for forklifts from 8 t onwards. We are also happy to offer your vehicle for consignment sale. Heating, full cab, full free lift, Platform height: 1030 mm

Condition: used, functionality: fully functional, machine/vehicle number: 11163, Year of construction: 2023, operating hours: 300 h, load capacity: 12,000 kg, lifting height: 4,500 mm, free lift: 1,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, power: 129 kW (175.39 HP), fork length: 1,300 mm, empty load weight: 21,450 kg, total length: 5,790 mm, drive type: Diesel, construction width: 2,300 mm, Sideloading forklift Prsdox Ekz Ajpfx Adlsc Chassis number: 11163 Load center: 650 Fork width: 200 mm Fork thickness: 90 mm Mast type: Duplex Condition: Like new Technical condition: Very good Front tyre type: Pneumatic Front tyre size: 14.00-20 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 14.00-20 Rear tyre condition: 60 - 80%

Condition: used, axle configuration: > 3 axles, first registration: 01/2015, total length: 13,400 mm, total width: 2,740 mm, total height: 900 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 8,220 mm, color: white, Equipment: ABS, 1 x lift axle. 2 x friction-steered / trailing-arm steering. Extendable. Beam wideners. Total length: 1340 cm. Loading bed length: 923 cm + 640 cm. 274 cm width + beam wideners. Height when loaded: 90 cm. Pjdpfxe Adykfo Adlerc = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; tire tread depth, left inner: 45%; tire tread depth, left outer: 45%; tire tread depth, right inner: 45%; tire tread depth, right outer: 45% Rear axle 2: Dual tires; tire tread depth, left inner: 45%; tire tread depth, left outer: 45%; tire tread depth, right inner: 45%; tire tread depth, right outer: 45% Rear axle 3: Dual tires; tire tread depth, left inner: 45%; tire tread depth, left outer: 45%; tire tread depth, right inner: 45%; tire tread depth, right outer: 45% Rear axle 4: Dual tires; tire tread depth, left inner: 45%; tire tread depth, left outer: 45%; tire tread depth, right inner: 45%; tire tread depth, right outer: 45% Weights Unladen weight: 13,860 kg Payload: 51,140 kg GVW: 65,000 kg Identification Model number: 4AOU-16-40 / RIM WELLS / EXTENDABLE = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device Prjdpfxoxabumo Adlec - 2x front support arms - movable double foot switch (operation)

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg Prodpfx Adezty E Dslsc

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Psdpsx Aqdcjfx Adlerc Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Prsdpfsz Im Raex Adljc Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 734, Drill diameter: 35/40 mm Spindle mounting: MK 3 Spindle speeds in 2 ranges and continuously adjustable: 160 - 2250 rpm Drilling stroke: 140 mm Overhang: 293 mm Drive motor: 380 V, 1.5/1.9 kW Prjdpfez Divqex Adlsc Weight: 250 kg Space requirement: 900 x 550 x 1830 mm

Condition: new, spindle mount: MK 4, drilling depth: 160 mm, rotational speed (max.): 1,400 rpm, rotational speed (min.): 700 rpm, total width: 637 mm, total length: 1,096 mm, total height: 2,120 mm, Equipment: documentation/manual, SB P40 ST GPV R2 Column Drill Podpezqugwofx Adlerc Maximum bore capacity Ø 40 mm Spindle taper MK 4 Drilling depth 160 mm Drilling table size 590 x 450 mm Spindle speed min. 70 rpm Spindle speed max. 1.400 rpm Length 1096 mm Depth 637 mm Height 2120 mm Weight 470 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw Pedpfx Aomv Ehzsdljrc - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Psdpfx Adsxnbr Islorc

Condition: used, functionality: fully functional, machine/vehicle number: 11579, operating hours: 225 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 660 mm, fuel type: diesel, mast type: duplex, construction height: 3,190 mm, power: 55 kW (74.78 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, total length: 4,730 mm, drive type: Diesel, construction width: 2,000 mm, Sideloading forklift Chassis number: 11579 Load centre: 600 Fork width: 200 mm Fork thickness: 50 mm Mast type: Duplex Condition: As new Prodpfx Adsx Ekx Uslsc Technical condition: New Front tire type: Pneumatic Front tire condition: New Rear tire type: Pneumatic Rear tire condition: New Description: Demonstration unit, available immediately! Price ex works, plus freight costs. Heating, full cabin, CE certificate, interior mirror, joystick, LED lighting, cross-cylinder extension system, 4 load platforms 1800 mm, BEGE comfort seat, Baumann yellow finish

Condition: good (used), Year of construction: 2008, working width: 4,100 mm, stroke length: 290 mm, overall weight: 11,000 kg, pressing force: 160 t, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons Prjdpfxjwi Skts Adlsc 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 59 kg, warranty duration: 6 months, COLD WATER PRESSURE WASHER KARCHER HD 6/16 ST-H New accessories Brass, durable head The device has undergone a general, meticulous renovation, the operating parts have been replaced with new ones, new ceramic pistons, new valves, new seals, new bearings and many other new parts Stationary high-pressure devices without water heating with exceptionally compact dimensions Possibility to hang the washer on the wall You are buying exactly the washer you see in the pictures, other models are available on our other auctions to which we cordially invite you TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Pressing capacity (l / h): 600 Working pressure (bar / MPa): 160 / 16 Maximum pressure (bar / MPa): 200 / 20 Prjdpfx Asv S U Nredloc Connection power (kW): 6.3 Fuse (A): 16 Weight (kg): 59 EQUIPMENT: Adjustable nozzle (new) 10 meters of reinforced hose (new) Stainless steel pressure lance (new) German, durable pressure gun (new) GEKA water filter and connectors - free

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories Pedpfx Adjxp Ndhjlorc - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Pjdpfx Aey S Artjdlorc Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: used, Year of construction: 2000, machine/vehicle number: M309, Used filling monoblock Bertolaso Syncronia 16-16/1-840Technical Specifications & Performance DataThe Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction.Manufacturer: BertolasoModel: Syncronia 16-16-1-840Year: 2000Container type: Glass bottlesRinser: 16 grippers with penetrating nozzle and double inert gas treatmentFiller type: Gravity/light depression with nitrogen supportCorker: Single-head straight corking with inert gas and vacuum corkingFormats: Compatible with 0.375L and 0.75L bottle formatsElectrical: 400 V, 50 HzCIP readiness: Integrated CIP with stainless steel dummy bottlesModel code & configuration: Syncronia 16-16-1-840Advanced Automation & Control SystemsThe monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production.Production Line Integration CapabilitiesDesigned for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts.Machine Condition & Maintenance HistoryThe machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability.Operational Performance & VersatilityThis monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks. Additional safeguards include outfeed sensors for bottle position control and level r... Predpoz E Dlpjfx Adloc

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Podehp Rdlepfx Adlerc Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Predpfx Adswcqw Soljc Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h