Guillotine shear

LVD HST - C 40/6

Condition: used, Year of construction: 2007, Technical details: Nledpfx Aox A S Rdef Sog pressure: 225 t chamfer lenght: 4100 mm height of stroke: 400 mm throat: 250 mm dayligth: 917 mm total power requirement: 30 kW dimensions of the machine ca.: 5500 x 2270 x 3310 mm weight of the machine ca.: 22 t

Year of construction: 1991, condition: good (used), machine/vehicle number: 166, Offer 22014 Technical Data: - max. working width 4080 mm - max. cutting capacity St 40 6 mm - hydraulic cutting angle adjustment - manual cutting gap adjustment - stroke rate, depending on cutting angle and cutting length, approx. 20 - 25 per minute - rear stop with positioning control ELGO, 10 - 1000 mm - cutting length adjustment - 17 hydraulic clamping cylinders - front angle stop - front support arms Nsdpfjh N U Hpsx Af Selg - Drive 400 V / 9 kW - Foot pedal - Space required without support arms, approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 200 t, stroke length: 300 mm, operating speed: 90 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, overall weight: 17,000 kg, working width: 4,060 mm, back gauge travel distance R-axis: 150 mm, distance between stands: 4,200 mm, warranty duration: 6 months, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts Nodsvpqpiepfx Af Sjlg

Condition: excellent (used), functionality: fully functional, Number of axes: 6 Maximum bending length: 4100 mm Bending force: 200 tons Bending thickness: 6 mm Njdjyizidopfx Af Selg Stroke: 215 mm Maximum approach speed: 200 mm/s Power: 15 kW Weight: 15,600 kg

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Nlodpswxb Igsfx Af Sjg

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2550 mm Press force: 135 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2100 mm Forward speed: 120 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 150 liters Main motor power: 7.5 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 850 mm Table width (G): 110 mm Length (L): 2950 mm Height (H): 2200 mm Width (W): 1500 mm Weight: approx. 6000 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) Nodpogu Nzrefx Af Solg -Painting in special colors on customer request Documentation in German or English CE conformity

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - adjustable cutting gap - number of strokes depending on cutting length approx. 20 - 25 per minute - rear stop with positioning control ELGO 10 - 750 mm - cutting length adjustment - hydraulic clamping device - front angle stop Nodsibmaxjpfx Af Sjlg - front support arms, laterally adjustable - drive 400 V / 15 kW - foot pedal - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg

Condition: new, range L-W-H 1066 x 460 x 940 mm weight 80 kg 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Nodpfx Afeupxu Ao Sslg Maximum loadable weight of the tool trolley is 350 kg

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Power: Three-phase 380V Nlodpfowx Ix Ssx Af Seg Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s Nlodpjzizybefx Af Sjg - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg