Precoat Filter System

Faudi ASTAV 16-6

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve Bodpfxorgzv Ne Amyjdf * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Year of construction: 2023, condition: ready for operation (used), An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible. Bdsdpjulkumjfx Amysf

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Filter capacity 6 m² Bdodpfxjwgizwo Amyjf total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Type: R100/75/V Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used Bodpfx Aswav Hmjmyedf

Condition: excellent (used), functionality: fully functional, power: 140 kW (190.35 HP), Year of construction: 2021, operating hours: 7,212 h, Equipment: air conditioning, cabin, gripper hydraulics, hammer hydraulics, Hitachi ZX 250LCN-7 Year of manufacture: 2021 Operating hours: 7,212 h CW40 quick coupler with various options Bedpfx Asy U E Hrjmysdf For more information, please inquire!!

Year of construction: 2018, condition: used, For sale is a fully functional used screw conveyor with a screw diameter of 50 cm. The device has operated for several months in a line feeding vegetables to a peeler. SCREW CONVEYOR Type PSL.U500/1.8 • Device intended for feeding vegetables into the peeler infeed hopper Bdjdpfexnrr Sex Amyef • Infeed hopper adapted for manual feeding, H=800 mm • U-section trough, 500 mm; Length approx. 2700 mm • Discharge height to peeler infeed approx. 1800 mm • Cleaning port in the lower part of the trough; Operating angle approx. 45° • Bearings mounted outside the working section; Lower shaft sealing with packing • Structure mounted on adjustable feet and wheels • Feeding speed adjustable by frequency inverter, external potentiometer on the control panel • Acid-resistant (stainless steel) control panel mounted according to arrangement • Electrical supply: Power 2.2 kW, ~3x380 VAC, 50Hz

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry. Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact. It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled. The capping torque is adjustable. Bsdpfx Ajx Tg Tqemysdf The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function. All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards.

Year of construction: 2004, condition: used, Technical details: candle diameter: 21 mm candle length: 300 mm Bjdpfou Nw S Ijx Amyjdf capacity: 1872 Stück/h heating-up temprerature: 70-120 °C cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m Candle Production Plant / Candle Molding Machine - This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation. - Multicoloured candles can be produced and equipped with various mould boxes (e.g. cylindrical board candles or pointed candles). - production capacity: for max. theoretical maximum performance of 1872 pieces / h with a minimum cycle time of 23 seconds per mould box with 12 candles with 300 mm pointed candles and board candles with diameter of 21 mm, continuous operation approx. 1200 pieces / h Documentation available Price on a negotiable basis! *

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Bodpfx Aetuqmgomyjdf Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l feed pressure max. 200 bar coolant capacity 950 l Bdodpozczkzsfx Amyjf Control Siemens total power requirement 45 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m