Column Drill

FLOTT SB P40 ST GPV R2

Condition: used, Year of construction: 1979, Technical details: Bwjdpsu Ng Ncjfx Amrju grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min Bodpfx Aefg U Tpemrjwu transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: excellent (used), Year of construction: 2020, - Siemens Sinumerik 828D control system - Accessories: Collet chuck Working area Bwjdpfxjzcv Rij Amrju Swinging diameter over bed ø250 mm Swinging diameter over cross slide ø85 mm Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering rim) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle clamping system Hollow cylinder (pneumatic) with draw tube, max. passage ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously variable) 60-6300 rpm Max. torque 35 Nm Dimensions Height of the turning axis above the floor 1130 mm Overall height 1820 mm Footprint (without options) 1700 x 1270 mm Weight 1400 kg

Condition: like new (used), Kitagawa MR200 rotary table Condition: new, unused Bwjdpfx Amoy H Ewnersu The table has been kept in storage and not used

Condition: like new (used), Year of construction: 2023, Technical specifications: Measuring range, X-axis: 400 mm Measuring range, Z-axis: 500 mm Max. tool length: 600 mm Max. tool diameter: ∅ 400 mm CNC control Dimensions (width x depth x height): approx. 1200 x 900 x 2100 mm Condition: Condition is almost like new, very little use. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Bwedpfx Ajzrgdqjmrsu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,767 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 570 mm, total height: 1,800 mm, total width: 1,350 mm, overall weight: 2,500 kg, bar diameter (max.): 52 mm, controller manufacturer: SIEMENS, product length (max.): 2,100 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. The machine is faulty. The hydraulic pump is no longer building up pressure. The Spinner TC 52 is no longer being repaired and is being sold as not fully functional. Contact us for further details. • Number of Live Tools: 12 • Live Tool Speed: 6,000 rpm • Live Tool Torque: 23.5 Nm • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: 280 mm • Maximum Swing Diameter: 400 mm • Distance Between Centers: approx. 550 mm • Main Spindle Nose: A6 • Bar Capacity: 52 mm • Main Spindle Torque: 92 Nm • Coolant Tank Capacity: approx. 85 l • Coolant Pressure: 8 bar • Supply Voltage: 3/PE ~ 400 V • Collet Chuck Used for Clamping • Dust Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 34 A • Rated Current (IN): 35 A • A collet chuck used for clamping • Turret with driven tools Optional equipment: • Bar feeder • Parts catcher Bsdpfxszlq I Tj Amrowu • Chip conveyor • TailstockThe machine is faulty. The hydraulic pump is no longer building up Spinner TC 52 is no longer being repaired and is being sold as not fully functional. Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: used, Year of construction: 1984, Technical details: Bwodeu Ng Irepfx Amrou grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: good (used), Year of construction: 1999, 4-axis CNC lathe with sub spindle and 2 turrets Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations C-axis: 0.001° on both spindles Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Spindle nose: ASA A2-5 Turning diameter: 440 mm Turning length: 360 mm Bedpfxey Enhme Amrswu Chip conveyor Parts catcher Bar feeder interface Bar feeder: LNS Mini-Sprint S2 42/3M

Condition: good (used), Machine number: 26798 Type / Model: BS 40 AIII Drilling capacity in steel / cast iron: 50 / 60 mm Spindle mount: MK 5 Spindle speeds: 32 to 1,400 rpm Feed rate: 0.11 to 1.73 mm/rev Table: 780 x 650 mm Clamping area: 630 x 500 mm Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total power consumption: 6.7 kW Bwedsiypmxspfx Amrju Accessories/Equipment: Thread cutting function, right-hand/left-hand rotation; automatic feed, separate control cabinet Condition: good Weight: 1.5 t Dimensions: 780 x 1,200 x 2,700 mm

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm control SIN840D swing over bed 400 mm swing diameter over slide rest 220 mm longitudinal slide -travel 745 mm cross slide - travel 200 mm turning speeds 10 - 4.000 U/min power capacity at 100 % load 15,00 kW spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm feed x-axis 1 - 12.000 mm/min rapid traverse X-axis 12,00 m/min Feed z- axis 1 - 20.000 mm / min. rapid traverse Z-axis 20,00 m/min tailstock quill taper MT 3 quill stroke 112 mm quill pressure 10,00 kN Bwedpfx Aox Avp Rsmrou tool taper DIN 69880 Ø 30 mm Tool drive speed max. 4.000 1/min total power requirement 37,00 kW weight of the machine ca. 4,00 t dimensions of the machine ca. 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.