Slot boring machine

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Knsdpfxoqt Dmye Adqjd The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. Kodpfxjtg Aile Adqend work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width Knsdpfxorrw Ucs Adqed - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3750, Machine glues solid wood up to 18.0mm and roll goods up to 3.0mm Cutting from the roll 3.0mm thick PVC, ABS, and real wood up to 2.0mm Flush chamfering 18mm Rounding and chamfer milling stations Total length 3.20m Knjdpfx Adeigad Eeqod Power consumption 7.1 kW Glue container Cutting shears Infinitely variable feed Cutting saw for front and rear edge Flush milling unit Rounding milling unit Chassis Extraction connection 100 mm

Condition: excellent (used), Maggi Boring System 29 Multi-spindle Drill Number of spindles 29 Kedpfx Adewclktoqond Speed 2800 rpm Distance between first and last drill 896 mm Noise level 76.1 dB Number of pneumatic clamps 4 Distance between the centers of individual spindles 32 mm Max drilling depth 65 mm Air consumption 10 l/cycle Weight 370 kg Working pressure 6 – 7 bar Motor power 1.5 kW Max element thickness 70 mm Spiral System - device for quick adjustment of drilling depth CE certificate

Condition: new, Year of construction: 2025, Sharpening solutions for chisels and hand tools. Quality that has been proven thousands of times in the trade. ✓ Burr-free grinding without removing the cutting edge! The specially developed grinding principle uses the grinding allowance to prevent the formation of a burr. This makes additional grinding of the cutting edge unnecessary. Side grinding of the cutting edges is possible in the same clamping. Knodpfevrbubsx Adqed ✓ Dry grinding without annealing or burning the workpiece! The heat is dissipated from the workpiece using the grinding allowances. ✓ Time and cost savings! Time is money. The efficient grinding principle sharpens the workpiece within a few seconds. ✓ Extremely easy to use! The system is simple, easy and quick to use. Effortless clamping and unclamping of the tools. Even trainees or unskilled workers can operate this machine. Problem-free and masterfully. ✓ Inexpensive maintenance! The machine has hardly any wearing parts. Only the grinding allowances and the grinding wheel wear out. ✓ Swiss quality! High-quality components guarantee stability and durability. Machines that are up to 50 years old are still in use. ✓ Swiss precision! The machine stands for a guaranteed high-quality grinding result. SAVE TIME, MONEY AND NERVES Application example: plane irons and chisels Sharpening and honing: Conventional methods: 4.0 min ISELI method: 0.5 min. ⇒ TIME SAVING: 3.5 min. Every medium-sized company has to sharpen at least 6 tools every day. This used to take 24 minutes. With the ISELI sharpening method, it only takes 3 minutes. You therefore save 21 minutes per day, 4620 minutes per year (for 220 days) or the equivalent of 77 hours. Based on EUR 35.-- per working hour including operating costs, you save around EUR 2,700.00 per year.

Condition: excellent (used), Horizontal units/supports (No.) 1 (adjustable 0° - 180°) Drilling heads/Blocks for each horizontal unit (No.) 1 Spindles for each horizontal drilling head (No.) 29 Max. working width (mm) 1000 (ca.) Vertical top pressure clamps (No.) 3 Ksdpfehgbhcsx Adqjnd Total installed power (Kw) 3 (ca.)

Condition: used, Year of construction: 1995, with pneumatic stroke for drilling on 2 levelswith rotatable drilling unitused, good condition, top equipmentmake Hoffmann-Dübelfixtype DBL T 142year of construction 1995Masch.-Nr. 1342CE type approvedmotor 1,4 / 1,8 kWworkpiece support swivels to the rightdrill chuck 20 mmdrilling depth 190 mmdowel drilling unit with 1 piece grid 12 mmworkpiece stopmotor speed 2 pieces 1400/2850 umatic strokedigital displaysaggregate rotatable / swiveling 63° - o - 63°workpiece clamp pneumatic 2 piecesline lasernew price approx. 17.000,00 €space requirement approx. 1400 mm x 1200 mm x 1400 mmweight approx. 400 kgstorage place 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout warranty and guarantee Kedpfjvwfg Sjx Adqond

Condition: used, Year of construction: 2024, Motor power: 1.5 kW Inlet nozzle: NW 120 mm Rated air flow: 814 m³/h Vacuum at rated flow: 2,180 Pa Filter area: 5.1 m² Manual cleaning including integrated pre-separator Collection container: 135 L Location: Nattheim Knodpfx Aoxbhz Aodqod

Year of construction: 1991, condition: good (used), - Working width (mm): 900 - number of drilling spindles: 27 - pitch (mm): 32 - drilling unit: swivelling Knodpfxjg Um Eko Adqed - motor power (kW): 1,9 - Required space L x W x H (mm): 1120 x 900 x 1150 - weight (kg): 550