1-roller calibrator with 1000 mm conveyor

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 140 2814, conveyor belt width: 700 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting a bid obligates you to collect the machine on time by 22.05.2026! TECHNICAL DETAILS Band width: 60 - 700 mm Sheet thickness: 0.5 - 4 mm Feed length: 0 - 700 mm Gsdpfxjy Nkdls An Rjbl

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm Gbedpfx Aoqw Akmsn Rol coil weight: 10 t

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 140 256.4, conveyor belt width: 600 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting an offer obligates you to collect on time by 22.05.2026! TECHNICAL DETAILS: Band width: 600 mm, Sheet thickness: 0.5 - 4 mm, Feed length: steplessly adjustable 30 - 500 mm. Godpfx Aney Nkb De Robl

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 4004/1135, conveyor belt thickness: 3 mm, conveyor belt width: 600 mm, power: 5 kW (6.80 HP), The payment deadline for the machine is 18.05.2026! Submission of a bid requires timely collection by 22.05.2026! TECHNICAL DETAILS Band width: 100 - 600 mm Band thickness: 0.5 - 3 mm Max. load: 11 t MACHINE DETAILS Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW EQUIPMENT Decoiler Integrated feed unit Gsdjy Nkaajpfx An Rjbl

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch Gedpsxczmzjfx An Rjbl The machine is available immediately. Loading onto truck possible.

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Gbedpfxoy Ib H Ij An Rsl Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Gedpfoy Ib A Njx An Robl Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Minimum length of the processed element 470mm Feed speed regulated by means of a variator Gjdpfx Asv Tv Ursn Robl Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00150, Year of construction: 2022, operating hours: 1,792 h, load capacity: 2,500 kg, empty load weight: 690 kg, total height: 1,300 mm, total length: 3,500 mm, total width: 800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: E24/55 HFX Operating hours: 1,792 h Dimensions & Weight Dimensions (L x W x H): 3,500 x 800 x 1,300 mm Unladen weight: 690 kg FEATURES Charger PIN code unlocking The following technical data is based on the manufacturer's datasheet. The seller cannot guarantee its accuracy. Load centre: 600 mm Distance from wheel axle to load carrier face: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + Polyurethane / Polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load wheel dimensions: Ø 85 x L 85 mm Load wheel dimensions, bogies: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogies: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier face: 1,170 mm Outer fork arm width: 520 / 540 / 560 / 680 mm Ground clearance, wheelbase centre: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised/lowered: min. 2,095 / 2,165 mm Performance Data Gsdpfsy H Dk Hsx An Rebl Travel speed with/without load: 10 / 12 km/h External reference: W42365L00150

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00151, Year of construction: 2022, operating hours: 1,666 h, load capacity: 2,500 kg, empty load weight: 605 kg, total height: 1,700 mm, total length: 2,300 mm, total width: 800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: HFX 1600/3200 Operating hours: 1,666 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,700 mm Unladen weight: 605 kg EQUIPMENT Battery charger PIN code unlocking The following technical data is taken from the manufacturer’s datasheet. The seller cannot guarantee its accuracy. Gbjdpfxsy H Dcij An Rsl Load center: 600 mm Distance from load wheel axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tires, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load side wheel dimensions: Ø 85 x L 85 mm Load side wheel dimensions, bogie: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Tiller height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm Outer fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00151

Condition: excellent (used), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 380 V, workpiece width (max.): 630 mm, CODE: CAL-054 USED MACHINE - V380/50 - "CE" Working width: 630 mm 1st combined unit: steel roller/pad Working height: 3 – 160 mm Belt size: 640 x 1525 mm 2 conveyor belt speeds: 4.5/9 m/min Motor power: 5.5 kW Gjdpfjyni Hnjx An Rjbl

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42364L00583, Year of construction: 2022, operating hours: 2,593 h, load capacity: 2,000 kg, empty load weight: 595 kg, total height: 1,300 mm, total length: 2,300 mm, total width: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,000 kg Gsdsy H Dbrspfx An Rebl MACHINE DETAILS Charger: E 24/55 HFX Operating hours: 2,596 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,300 mm Unladen weight: 595 kg EQUIPMENT Charger Key The following technical data are taken from the manufacturer's datasheet. The seller cannot guarantee their accuracy. Load center: 600 mm Distance from drive axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, bogie: Ø 85 x W 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in operating position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm External fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with load / without load: 10 / 12 km/h External reference: W42364L00583

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Gbsdpfx Anjy Hki As Rjl Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Gsdpfjyi Sfcox An Rsbl

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart Gjdpfxsy Hkhro An Rsbl 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit