Gear hobbing machine Gleason Pfauter SH120

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Ljdsxpil Sepfx Adksrw Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: excellent (used), Year of construction: 2018, operating hours: 1,730 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 82 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, mount diameter: 24 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 80 mm, collet bore: 80 mm, bar diameter (max.): 80 mm, CNC Turning and Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories The machine has had very little use, with approximately 1,730 spindle hours, so it is as good as new and available from 01.01.2026. Additional accessories for Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 tool holder for parting-off tools - 1 double right tool holder for external tools (sub spindle) - 1 double left tool holder for external tools (main spindle) - 4 driven tool holders ER-32 radial (X axis) - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 collet chuck for main spindle including collets for Ø50 mm and Ø30 mm Lsdpfx Adjxauwboksrw - 1 collet chuck for sub spindle including collets for Ø50 mm and Ø30 mm - 1 set of reduction sleeves for Ø50 mm (10 pieces) - 1 set of reduction sleeves for Ø32 mm (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling holder) - Flushing device with coolant on main spindle for automatic jaw cleaning - Device for automatic jaw cleaning with compressed air - Additional high-pressure pump for internal coolant supply (drilling with indexable drills) - Automatic machine shut-off function (machine also switches off the main power, thus disconnecting the power supply) - Interface for automatic bar feeder magazine Iemca

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Ledpfewn Dbnjx Adkjrw Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm Lrsdpfjt Hwqqsx Adkew gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm Lrjdpelzhhksfx Adkow - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Year of construction: 1962, condition: used, machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing stroke: 1320mm turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Lrodpfx Adsdl Uzkskjw Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Center high 290 mm Between centers 1000 mm Swing dia over bed 580 mm Swind dia over cross slide 380 mm X travel 295 mm Travel of hand slide 135 mm Lodowdvmzspfx Adkorw Spindle speed 20-2000 rpm (21 ranges) Motor power 7,5/11 kW Spindle hole D70 mm Spindle nose DIN55027 (8-er) Tailstock sleeve MT5 Feedrate longitudinal 0,04-12 mm/rev. (120 ranges) Feedrate cross 0,02-6 mm/rev. (120 ranges) Weight cca 2860 Kgs Accessories - Steady rest - Following rest - Faceplate - 3 jaws chuck - Machine working light - Rapid feed

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm Lsdpewdiu Esfx Adkorw W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paint finish: Graphite gray RAL 7024 / Agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Main drive: Motor / Make: Siemens Main spindle drive Tap: 1PH7 Ljdpfev R Hwrex Adksrw Maximum drive power: From 198 rpm 100% duty cycle KW41 Maximum torque: Constant up to 198 rpm 100% duty cycle 1920 Nm Speed control / Gearbox: 3-stage (oil-cooled) With automatic Switching Spindle speeds 4000 rpm: low range rpm 0 - 516 medium range rpm 460 - 1,288 high range rpm 1,200 - 4,000 Axis drives/axis feeds: Axis drive motors: Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 32,000 N Axis drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63 x 20 Z-axis (transverse) Ball screw (preloaded) Ø 50 x 20 Weight: (without clamping table/plate area) approx. 49,500 kg Connection cable: approx. 60 kVA Innotrol HBG wireless handwheel Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform with height adjustment of 1800 mm and transverse adjustment of 800 mm Interface for adapter milling heads RepairFIT+ – what does it mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive inspection, and are thoroughly cleaned by our experts. All identified defects, both technical and cosmetic, are professionally repaired so that the machine is presented in perfect condition.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table length: 2,000 mm, Control: HEIDENHAIN TNC-426 Travel of the X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper tip: ISO 50 Speed range: 20 - 3000 rpm Spindle power: 17 kW Lrodpfx Aevfr Hbodksw