Hydraulic guillotine shears

LVD MVC 3100 x 20 mm

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam Ncodpfehzbipsx Ad Nel - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2025, Another machine immediately available! Ncodpfsv Rpxlex Ad Nsl Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; Ncsdpfx Aoumhm Aod Nol ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Ncjdev Taiaepfx Ad Nel Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Ncsdpfowh R R Njx Ad Nol

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm Ncodpfjt Hw Shsx Ad Nel work piece width 1350 mm total power requirement 65 kW weight of the machine ca. 7.500 kg dimensions of the machine ca. m

Year of construction: 2005, condition: ready for operation (used), A fully equipped bistro is available. Components: 1) Dish conveyor dishwasher. 2) Furniture. 3) Small and large kitchen equipment. 4) Customer furnishings such as tables, chairs, and self-service counters. 5) Refrigerators. 6) Deep fryers and grills. 7) Cash registers and scales. 8) Dishes, plates, etc. 9) Extraction and filtration technology. Documentation available. An on-site inspection is possible. Ncedpfx Aexc Nhmod Nsl

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears Ncsdpfx Ajxcyw Eed Nol - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

Condition: like new (used), Electric oven 4 floors and fermentation chamber Stainless steel Easy to clean Ncedpsxulhmsfx Ad Nol Tray dimension: 80 x 60cm Voltage: 400 / 230V / 50HZ / 3/N/PE Power of 1 deck: 5.9kW

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Amada Promecam Guillotine Shear Type GPX 630 Nedpexgpqvofx Ad Njcl For more information, please contact us BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS