OMIS 5-ton overhead crane

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X387C03060, Year of construction: 2012, operating hours: 2,520 h, load capacity: 2,500 kg, lifting height: 3,465 mm, free lift: 1,655 mm, fuel type: electric, mast type: duplex, construction height: 2,324 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 3,465 mm Free lift: 1,655 mm Overall height: 2,324 mm Mast type: Duplex Ppsdpfoznu E Uex Amyow ISO class: 2 Drive type: Electric Fuel type: Electric Battery voltage: 80 V Drive power: 2 × 9 kW MACHINE DETAILS Unladen weight: 3,730 kg Battery weight: 1480 - 1636 kg EQUIPMENT - Partial cabin - Side shifter - Fork positioner - 3rd valve - 4th valve External reference: SL14294

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm Pedpfxsx E Eihe Amyopw MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X387F00981, Year of construction: 2015, operating hours: 12,599 h, load capacity: 2,500 kg, lifting height: 3,765 mm, free lift: 1,695 mm, fuel type: electric, mast type: duplex, construction height: 2,475 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast type: Duplex Lifting height: 3,765 mm Free lift: 1,695 mm Overall height: 2,475 mm Load capacity: 2,500 kg ISO class: 2 Ppjdpfoznu E Iex Amyow DRIVE Drive type: Electric Fuel type: Electric Battery voltage: 80 V MACHINE DETAILS Unladen weight: 3,475 kg Rated drive power: 2 × 9 kW Maximum battery weight: 1,531 kg Minimum battery weight: 1,386 kg EQUIPMENT - 3rd valve - 4th valve External reference: SL13171

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386Y09805, Year of construction: 2021, operating hours: 6,459 h, load capacity: 1,600 kg, lifting height: 4,650 mm, fuel type: electric, mast type: simplex, construction height: 2,946 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,650 mm Mast type: Simplex Ppedpoznu Ezjfx Amysw Overall height: 2,946 mm ISO class: 2 Battery Battery voltage: 48 V Battery capacity: 750 Ah Number of battery cells: 24 Rated drive power: 2 × 4.6 kW MACHINE DETAILS Unladen weight: 2,385 kg Battery year of manufacture: 2021 Battery weight: approx. 1,054 kg EQUIPMENT - Side shifter - 3rd valve - Heater - Full cab External reference: SL18223SP

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Psdsxf E Twopfx Amyjpw Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386X00953, Year of construction: 2020, operating hours: 6,047 h, load capacity: 1,600 kg, lifting height: 3,045 mm, fuel type: electric, mast type: duplex, construction height: 2,071 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast type: Duplex Lifting height: 3,045 mm Free lift: 1,420 mm Load capacity: 1,600 kg ISO class: 2 Fork Fork dimensions: 180 × 70 × 8 mm Fork length: 980 mm Drive Drive type: Electric Fuel type: Electric Battery Battery manufacturer: Hawker Battery type: 48 V 4 PZS 500 Battery voltage: 48 V Battery capacity: 500 Ah (C5) Battery cells: 24 Battery year of manufacture: 2020 Battery weight: 700 kg Battery volume: 120 l MACHINE DETAILS Overall height: 2,071 mm Rated power: 2 × 4.6 kW Unladen weight: 2,675 kg Podpfeznu Euex Amyopw EQUIPMENT - Side shifter - 3rd valve External reference: SL16769

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar Ppjdpozln D Esfx Amyow EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Ppedpjpiarnjfx Amyow Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Ppsdpfszlnxiex Amyow Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Ppodpfxezlnvuj Amysw Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Condition: excellent (used), Year of construction: 2014, HAAS VF-4SS vertical machining center Year: 2014 TECHNICAL DETAILS Travels X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Table: 1321 x 457 mm Max. table load: 800 kg Spindle Speed: 12000 rpm Power: 22.4 kW Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Tool Changer Capacity: 40 poitions Type: SK 40 Weight: 6500 kgs Accessories/options: Ppodezhut Eepfx Amyow - 40 position tool changer, SK40 - High-pressure through spindle coolant - Chip conveyor, spiral type - Renishaw measuring touch probe - Renishaw OTS tool setter - CHICK foundation base plate - 4 pieces hydraulic vice - lots of tool holders as on the pictures Under power in our warerhouse!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Pedpfezlhnqsx Amyspw Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer Psdjzlhcnjpfx Amyspw NitroLine FocusLine PlasmaLine SprintLine ContourLine

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Ppsdpfx Amou N Auusyew Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT Ppsdpfx Aozhuyfjmysw 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks