Grinding machine LöWER DSM 3000 (1998)

Loewer DSM 3000

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Godpfx Akoyrty Toyobu Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Year of construction: 2001, condition: excellent (used), For sale: Costa A1 ACT 1150 belt grinder, year 2001. Configuration: soft cylinder with electronic segmented pad. Working width: 1150mm Belt dimensions: 1180x2620mm Pressure rollers for short workpieces. Fan for creating negative pressure, included. Air blast for both units. Total weight: 2500 kg Gbodpsgq U R Njfx Akysu 2 motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, machine is regularly serviced. Available immediately.

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Gsdezuzcmjpfx Akysbu Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2020, SEE photos + PDF layout ATTACHED 1 NEW CSP Aut. complete parquet shrink foil packing line (year 2020) never in use. Godpfx Aeypb U Tskyebu TOTAL LINE consisting of: roller track + industrial parquet scanner + strapping machine + shrink foil packing line AVM 700 + roller conveyor + heating unit + aut. labelling + collect accumulator with double lenght cross conveyor. (see pdf layout)

Condition: used, Year of construction: 2001, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm Gbsdpjxtakmsfx Akyeu - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. Gbsdpeyaqihjfx Akysu – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) – Machine weight (net/gross): 415 / 483 kg

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Gbsdpju Afz Rsfx Akysu

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Year: 2007 Description: - L-sealer Gsdpfoulixqex Akyjbu Shrink tunnel

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Gbjdpfev Dfp Hjx Akyju Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: good (used), Year of construction: 2009, I sell the widebelt sanding machine Costa SA1 TT 1350, year 2009. Configuration: 1pc. electronic segmented pad Gjdpfxevxlg Ie Akyjbu 1pc. electronic segmented pad 1pc. cleaning unit. Working width 1350mm Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. End brushing unit with dust extraction. Total weight 3400kg Designed for the line, with fixed working height and moving aggregates. 2 motors, total power 31 kW Including documentation. Condition very good. Available immediately.