2004 LEADERMAC SPEEDMAC 826

LEADERMAC SPEEDMAC 826

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Holtec package cross-cut saw Vario Cut with Holtec mechanization. Jörg Elektronik. Complete disposal/removal under the cross-cutting system. Kodpew Smz Defx Affenf

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Ksdpelu D Tfjfx Affonf Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- Kodpfovu Hghox Affjnf > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Ksdpevx Afnjfx Affenf Opening side up to 3000 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Deilman S, Second hand but fully renovated dipping tank for wood treatment. 6,5m long, 1,35m wide and 1,5m high with loading platform 6m. Automatic steering with 4 programs of dipping. Ready for work. Can dipp packets 1,2 x 1,2m - ideal for pallet boards Knjdpfxjudwdwj Affjf

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Kjdpowhmdfsfx Affenf Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology Knjdpfothk T Ijx Affjf CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Kodpfxjwmw Nvj Affjnf Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, - Workpiece width: min. approx. 190 mm - max. 2600 mm - Workpiece thickness (mm): 8 - 90 - Workpiece projection adjustable (mm): 10 - 120 - Working height from floor (mm): 905 - Infinitely variable feed rate (m/min.): 5 - 25 - Magnetic braking of the feed motor - Max. adjustment speed (m/min.): 3 - Transport chain with cams: Cam spacing 900 mm, cam height adjustable up to 20 mm Knodpfxsur Uzqs Affof 3 motors per side: - 1st scorer: 1.5 kW controlled - 2nd hogger: 4.5 kW, 15° swiveling - 3rd milling motor: 4.5 kW, electro-pneumatic control for insert milling, swivel range 90° - Free space: for mounting a standard milling unit

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller Knodpfocht Nyex Affof - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock