Double end tenoner

CELASCHI TSA 280

Condition: new, Year of construction: 2024, Boring and inserting machines Rilesa Vlg 2200 new 2023 Make: Riles Model: Vlg 2200 Description: Condition: new Year: 2023 Start type: to be agreed Ijdpogbpmhefx Aa Esid Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Machine Tools equipment in Poland Subcategory: Drills Subcategory 2: Drilling machines Description DRILL DRILL WITH STORAGE 8 DRILLING UNITS TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 BACKS Year: 2023 new

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Iodpfxsykrdbe Aa Eeid Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Iisdpfsug Ty Hex Aa Eod Machine width: Weight:

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller Iodpfsw H Rq Hox Aa Esid - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter Iodpfx Aaev Si Szs Esid 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. Iodpfx Aasy Hb Upe Eoid PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), Year of construction: 2001, Complete Parquet painting shop Manufacturer - SORBINI/ VIET Year - 2001 Capacity - 800 m2/shift Time of one cycle - 8 min. Lenght of the line - 42 m Iiedpfjrdgrvex Aa Eod

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg Explosion-proof Isdpfehu Sf Hjx Aa Eoid The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Iiedpfjdvlcyox Aa Eod

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Platform size 7100 x 2500 mm Iiodpewq N Sdefx Aa Esd Inspection valid 11.2025 Length:7100mm Width:2500mm Height:900mm