LASI 27.600l (276hl) Fermentation and storage cellar (2011)

LASI Gär- und Lagerkeller

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Gusdpfx Agetiy Nts Dek Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: as good as new (ex-display), 1.000 m barely used HDPE dredge pipe with lose flanges Guodpfx Aef Tdn Ueg Dok 500 m used HDPE dredge pipe with fixed flanges

Condition: excellent (used), mileage: 16,330 km, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, gearing type: mechanical, emission class: euro6, Year of construction: 2015, Equipment: ABS, low noise, soot filter, spoiler, = Additional Options and Equipment = - Electric windows - Electrically adjustable exterior mirrors - Speed limiter Gjdpfx Ageuxvpke Djuk - LED lights - Air suspension - Air horn - Fog lights - Particulate filter - Sun visor - Stability control - Toolbox - Power take-off (PTO) = Further Information = Drivetrain AdBlue system: Yes Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Dual tires; Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered Weights Unladen weight: 17,420 kg Payload: 11,580 kg gross vehicle weight: 29,000 kg Functional Mast: Telescopic (12 sections) Mast length: 33.8 m Lifting capacity: 20,080 kg Lifting height: 3,380 cm Crane: COPMA 510.7 + JIB J4, mounted behind the cab Superstructure brand: COPMA 510.7 + JIB J4 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Identification Registration number: 01-BVF-9 SCANIA P250 6X2 + COPMA 510.7 CRANE + JIB J4 EURO 6 L PACKAGE 250 HP DRIVE 6X2 LAST AXLE STEERED AND LIFTABLE 10 TON FRONT AXLE WHEELBASE 370 CM AIR SUSPENSION CP14L CAB WITH LEATHER INTERIOR MANUAL TRANSMISSION TOOLBOX ONLY 16,330 KM!!! COPMA 510.7 CRANE + JIB J4 OIL COOLER FOR CRANE HYDRAULICS 11X HYDRAULICALLY EXTENDABLE + 1X MANUAL MAX WORKING HEIGHT 33.8 METERS MAX LIFTING CAPACITY 20,080 KG MAX LIFTING CAPACITY AT 30.1 METERS 350 KG 4X OUTRIGGERS RADIO REMOTE CONTROL BALLAST PLATFORM WITH REMOVABLE ALUMINIUM SIDE PANELS 450 CM LENGTH LASHING EYES FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, fully mobile concrete fuel station Frumecar Fastmix * THE STRESSED GAS STATION * - Year of construction: New - 2-4 chambers with 7-14 m³ capacity - capacity: 14-25 m³-h depending on mixer size - mixer size: 0,5 m³ - 0,75 m³ -1,0 m³ Gjdohd I Smspfx Ag Dsuk - Concrete software from Siemens with self-service terminal and new barcode method and EC card terminal - concrete discharge conveyor 9m length - Cement silo 32 to. incl. cement screw conveyor - installation, commissioning and training incl. - 2 years warranty - Highest quality plant on the market. All components produced in produced. Electric motors and gearboxes from Siemens installed. Other plant components from the market leader VAM. Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Gedogi Nxaopfx Ag Douk

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg Gusdpfxeg Ezarj Ag Dsk 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Gsdpfxspgzhue Ag Douk Control panel Dimensions: 2400 x 600 x 2000 mm We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm Gsdpfx Agsh Nq E Se Deuk 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Condition: good (used), Refrigerant system Copeland with original condenser Type: D6DT5-320X-AWM/D (x4) Volume: 126.9 m3/h (x4) Cooling capacity: 220 kW at -10°C/40°C, 56.2 kW at -35°C/40°C Refrigerant: R404A With original condenser Guntner GVH 067B/2x3N Guodog N Hu Sjpfx Ag Dek Pieces in stock: 1 Condition: Used We have many other refrigeration machines. Chillers, compressors, coolers, condensers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is available on machineseeker.

Condition: ready for operation (used), Year of construction: 2005, SLITTING LINE MACHINE 4. SLITTING LINE - OME A/A DESCRIPTION CHARACTERISTICS 1 MATERIAL Coils Hot - Cold - Galvanize Gjdpovupk Aefx Ag Dsuk 2 THICKNESS Hot 1,5-5 mm Cold 1,25-3 mm Galvanize 1,25-4 mm 3 WIDTH COIL 500-1550 mm 4 MAX WEIGHT OF COIL PROCESSING 22τν 5 INTERNAL DIAMETER COIL 500-820 mm Decoiler type Double Cone 6 EXTERNAL DIAMETER COIL 1800 mm 7 INTERNAL STRIPE DIAMETER 508 mm 8 TOLERANCE OF STRIPE 0,2 mm 9 MIN STRIPE WIDTH 41 mm MAX STRIPE WIDTH 1490 mm 11 Number of Tearing / Width 1-2 mm 15 stripes 2-3 mm 9 stripes 4-5 mm 6 stripes 12 Minimum Trimming 1,25-3,85 mm => 10mm (2X5mm) 4-5 mm => 13mm (2X6,5mm)