Edge sanding machine

Langzauner EK 3/4

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Dsdpfxjfiugue Albscl Drive power: 5.5 kW Polishing disc diameter: 1000 mm

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg Dcjdpfx Alefpb Nmebel TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: new, table length 2000 mm table width 1000 mm stroke height 400 - 1010 mm Dedpfx Alsv Htkdobecl weight max. in kg 300 kg weight of the machine ca. 220 kg

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm Dcjdpfxjhfufge Albel -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Year of construction: 2025, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, The cleaning system utilizes the latest and most advanced technology for precise surface cleaning available on the market. The high energy efficiency and instant heat generation of the laser produce an explosive effect on the material’s surface, effectively vaporizing and removing contaminants and unwanted residues—contact-free, environmentally friendly, and efficient. Compared to traditional industrial cleaning methods, laser cleaning offers numerous advantages: it is eco-friendly, highly efficient, space-saving, flexible, and easy to operate—making it increasingly preferred by companies. Dcjdpeyffdkefx Albol

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Dcodpfx Alow I U Drebel Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Sideboard height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 51 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Integrated loading ramps 2800kg -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration certificate, 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Dcodjghpcaspfx Albol Get advice by phone, visit our website or come directly to us.

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 7 Dedpfxoy Edn Ae Albscl Second flexible pusher: yes

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Dsdpfxeyymtdj Albjcl Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1996, Woodworking machine, circular saw VEMA TKS LBM, year of manufacture 1996, with milling and drilling attachment. Data for milling and drilling attachment: Speed: 3,000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm. Data for saw: Speed 3000-6000 rpm, blade up to 450 mm, cutting height up to 155 mm, bevel cut 0°-45°, table dimensions 1260x1100mm, width can be extended with a fence, length 2200mm, extra table 750x950mm. Dcjdpfx Alehvaphebjl