Welding rotator, tank turning roll 10t

Lambert-Jouty CZG 10V

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Cedpjn Arm Tsfx Abbogn Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Cgedpfou R R Avjx Abbsn Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Didital display with foot remote control diameter from 180mm to 3500 mm Cgodsk Adl Hepfx Abbon drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min.

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm Cedpfovxwkfox Abbegn dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, saw band length: 5,700 mm, saw band width: 41 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, feed length X-axis: 600 mm, cutting range round steel at 90°: 400 mm, cutting width (max.): 400 mm, table height: 700 mm, overall weight: 2,200 kg, cutting height (max.): 400 mm, Fully hydraulic high-performance bandsawing machine in extra heavy-duty design, with a horizontally and parallel moving saw band, for cutting profiles, pipes, and solid materials of all grades, including extremely hard-to-machine materials (e.g. titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands. Saw unit made of solid polymer concrete construction, ensuring maximum running smoothness and extended saw band life. Guidance of the saw unit via two vertical square columns (dual-column guide) with hardened and ground guideways. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping via two horizontal frame clamping vises. Material feed through a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short remnants. Year of manufacture: 2004 Cutting range round: 400 mm Cutting range square: 400x400 mm Automatic material feed: 600 mm Cjdpfxeupvrxs Abbogn Multiple material feed: 99999 mm Cutting speed, stepless: 20-130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction, steplessly adjustable Material support height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg Coolant system Full enclosure CNC control Idle time monitoring Band tracking control Side guide rollers Height measuring system Light barrier

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. Cgedpfx Ashcnhmebbsn - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Cjdpfju Afttox Abbogn Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding turntable, tank turning device 6000 Kg load capacity with hand and foot remote control Diameter from 160mm to 4000 mm Drive rollers diameter 300mm Dimensions: length 1900mm x width 470mm x height 390mm Speed stepless 50 - 2000 mm / min. Cedpfx Abegfql Aebsgn Motor AC 380 V

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min Cgodpfx Abof Ak N Rebon cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm - Rollers: PUR wheels Cgedefxgrdjpfx Abben - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm - turning speed: 0 - 2,000 mm/min - Operation: hand remote control and foot switch