Wide belt sander through-feed

KUNDIG ENORM WIN

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Godpfx Acewxtb Eewsbk Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: new, feed pressure 8 bar Effective free air delivery 235/165 L/min Receiver capacity 50 / 10 l / bar weight of the machine ca. 37,5 kg. Number of cylinders 2 Stk. motor 230V / 1,5KW V / KW range L-W-H 790 x 400 x 730 mm Gbjdpfx Asu Imp Hscwok This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Gbjdpokh Niqofx Acwek Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: used, Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Power: 3 kW Gsdpedparyefx Acwobk -Engine: Briggs & Stratton -Sockets: 2 x 220 V lighting current -Dimensions: 820/620/H460 mm -Weight: 60 kg

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder Gedpjxtbtpsfx Acwobk

Condition: new, Year of construction: 2026, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement left/right spindle rotation Gbjdpjvuq Dksfx Acwok 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm S1 continuous work motor power 2.2 kW Power supply 400V Dimensions 770 x 920 x 1245 mm Weight 102 kg

Condition: used, machine/vehicle number: 63511, Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video Godpfxjll A Tmj Acwsbk We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Free-standing aluminium silo on foot ring (previously used as a milk powder silo) – used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 litres Manufacturer: P+W Metallbau Quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Upper head roof pitch: 15° Equipment and connections: Upper head: 1 x access manhole DN 600 with cover 1 x vent nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 Shell: Gbedpfji E Hnysx Acwek 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for sensor probe 6 x pipe holders for fill pipe (fill pipe not included) 6 x brackets for access ladder (ladder not included) Various pipe penetrations in the area of the lower supporting ring The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). The currently installed measuring and control technology is included in the price, but no warranty is given for its functionality! Otherwise as per images and drawing.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Gjdpfxjx Rt Eue Acwjbk Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 215 mm, total width: 130 mm, total length: 360 mm, overall weight: 7 kg, warranty duration: 12 months, type of cooling: air, product height (max.): 10 mm, welding current at 60% duty cycle: 150 A, welding current at 100% duty cycle: 130 A, welding current (min.): 5 A, welding current (max.): 200 A, - Tested used device in very good condition directly from the manufacturer - - Several devices available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (including gas management, high-frequency ignition and electrode welding function). All-in technology for power grid, generator and battery - "3 steps and weld" operating concept - Simple one-button operation - Continuous current setting - Ampere-accurate digital display - With graphical user guidance in the OLED graphic display - Maximum customization thanks to detailed welding sequence control - Job memory for 10 welding tasks Current new price (02/2025): 2,277.00 € plus VAT Scope of delivery: System including removable power cable, carrying strap, gas hose and operating manual THE MicorTIG SERIES. THE POWER PACKAGES FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional welders: The welding machines in the MicorTIG series from Lorch are the ultimate TIG machines for assembly use, but also for the workshop - suitable for steel and stainless steel. Whether for production or repair, with or without a power socket on site: The MicorTIG series improves the work results of TIG welders around the world - and makes their everyday life easier. Quite literally: At just 6.8 kg, you can easily take your Lorch MicorTIG welding machine with you anywhere - including accessories in the assembly case. Small but powerful: With the patented MicorBoost technology, the welding machines in this series get 200 amps from any normal power socket. INTUITIVE OPERATION. Thanks to the ampere-accurate digital display and clearly structured user interface, intuitive and at the same time very precise operation is possible. Also optionally available: an operating concept using a graphic display. NON-CONTACT HF IGNITION. TIG ignition is contactless with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, there are no inclusions in the seam and the electrode is protected. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse function up to 5 kHz is particularly suitable for processing thin welding sheets. It enables outstanding melt pool control and perfect results even with difficult welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save the parameters of up to 10 welding tasks and call them up quickly when required. Recurring tasks are completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. Lorch's MicorTIG welding machines are suitable for every electrode type and offer a convenient preselection for CEL and standard electrodes. Even special electrodes are no problem. During welding, the arc force control takes effect and ensures arc stability and perfect material transfer. The anti-stick system prevents the electrode from sticking or burning out. Gbodpfjvxid Rjx Acwjk WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE SOCKET. The patented MicorBoost technology provides enormous voltage reserves and regulates the TIG arc in an extraordinarily stable, controllable and precise manner – even with fluctuating mains voltage. This allows you to weld with up to 200 amps from a regular socket.