Krones Multimodul Variojet/Volumetic flow meter (2001)

Krones Multimodul Durchflussmesstechnik

Condition: new, Year of construction: 2026, warranty duration: 12 months, total height: 2,050 mm, total width: 1,350 mm, total length: 1,400 mm, overall weight: 580 kg, film width: 360 mm, product height (min.): 60 mm, product height (max.): 450 mm, product width (max.): 170 mm, product width (min.): 60 mm, filling weight (min.): 10 g, filling weight (max.): 200 g, air demand: 360 m³/h, Equipment: documentation/manual, The item is generally offered as project-based equipment or, depending on availability, as a demonstration machine. Manufacture bags in custom formats, fill them with your product, and seal them. Description - Excellent price-performance ratio - Easy to operate and clean - Low maintenance requirements - Made from rust-free stainless steel (1.4301) - Fully integrated control system within the packaging machine - Control via PLC with color touch display - Quick, tool-free format changeover - One format included - Technical documentation provided via regional partners Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 140-360mm - Bag size (LxW): 40-250mm x 50-170mm - Output rate: 15-40 bags/min (depending on unit) - Accuracy: ± 0.5 - 1.5g - Weighing range: 3 - 200g - Power consumption: 3.7kW / 230V / 50Hz - Air consumption: max. 360 l/min at 6 bar - Dimensions (LxWxH): 1400mm x 1320mm x 2050mm Fedpfxsq Uld Uj Aa Eepd - Weight: 580kg

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Fpsdpfx Aaonmv Rao Ejd

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Fpsdpfx Aonfvxzoa Esd

Condition: reconditioned (used), Year of construction: 1999, JASA 350 S vertical packaging machine + Markem Imaje SmartDate 5 Thermal Transfer Printer The machine has been renovated, ready for operation, adapted to pack vegetables or fruit in a Raschel bag with attached front and rear foil. Equipment: - Sealing jaw with dies for handles in the package - Forming tube - Feed funnel Fpodpfspgkwcjx Aa Ejd - Markem Imaje SmartDate 5 thermal transfer printer Machine data: - Productivity: up to 60 pcs/min - Horizontal jaw width: 270mm - Vertical heater length: 450mm - Forming tube diameter: 170mm - Width of the main foil: 570mm - Width of additional foil: 120mm - Machine length: 2.6 m - Machine width: 1.4m - Machine height: 2.1m

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Fpedpfx Aaowzvl Ss Esd

Year of construction: 2026, condition: new, The equipment is generally considered project stock or, depending on availability, can be offered as a demonstration machine. Application: Accurate dosing of free-flowing products in precise quantities. Scale Features - Easy operation - Fast and uncomplicated cleaning - Low maintenance requirements - Tool-free assembly and disassembly of all product-contacting format parts - Low maintenance requirements - Corrosion-resistant stainless steel construction (1.4301) - Entire control system integrated within the machine housing - Continuously adjustable vibration system for optimal product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing hopper volume: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) Fpodpfx Asq T R Sbsa Ejd - Control panel: 7" touchscreen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg

Year of construction: 2018, operating hours: 200 h, condition: like new (used), functionality: fully functional, Very modern and flexible cartoner. Fpsdpfx Ast Iu H Sea Eed Output max. 120 FS/min. Carton size [A x W x H] min. 30 x 15 x 65 mm max.180 x 105 x 250 mm The machine can be adapted to your requirements if necessary

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Fpjdotndpzopfx Aa Ejd Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: ready for operation (used), Year of construction: 2012, Canol make up pastry line Canolino 5.2 highly specified make-up line for the production of puff pastry, yeast dough and Danish pastry. This Canol Canolino 5.2 is equipped with an independent dough calibrator, ensuring precise dough thickness and consistent product quality. Reliable industrial line suitable for a wide range of bakery products. year of build 2012 length overall: 678 cm  conveyor belt width: 650 mm  independent dough calibrator V/4F volumetric dosing machine with 4 dosing nozzles cutting station guillotine cutting knives, folding shoes etc. Fodpfxoyhdpkj Aa Eepd PLC control with touchscreen mobile execution on wheels pictures BEFORE cleaning

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. Fpodpfeg Ey T Eex Aa Eed *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.