Injection molding machine

KraussMaffei 100-380 CX

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 Ljdpfx Apevyaxujvjrl 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Lrjdpfxergw Exo Apvol Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Lrjdpfst Rcn Nsx Apvol Germany

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Screw diameter: 45 mm (wear resistant) Distance between tie bars V: 470 mm Distance between tie bars H: 470 mm Type: Horizontal Drive: Hydraulic Air blow 2 units Lrsdpfxjx Elqrs Apvsl Euromap 67 for robot 2 pumps machine Injection pressure incrased 10% (2500bar) HOURS: 54914

Year of construction: 2005, condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Lredpfx Apjuabq Tevel

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers Lodpfx Apova Ht Ssvjrl -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed Standard / Option: 1/min. 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 19526ä Lrodpfexu Uvajx Apvol

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Ledpfjum U S Esx Apvjrl

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Ledpfx Apowhk Iusvorl

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Lodpfx Aeyf Uy Ujpvorl Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse