Machining center Kondia B1050 - 3 Axis

KONDIA B1050

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: B-7270, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, TECHNICAL DATA Manufacturer: KONDIA Model: B-1050 Year: 2004 Control unit: Heidenhain iTNC530 Serial number: B-7270 TABLE DIMENSIONS Work area: 1200 x 500 mm. T-slots (Nº x Width x Distance): 5 x 18 x 100 mm. Table to floor height: 885 mm. TRAVEL X: 1,000 mm. Y: 500 mm. Z: 610 mm. SPINDLE Spindle taper: BT40 Speed range: 12,000 rpm Distance spindle to table surface: 140-750 mm. FEEDS Cutting feed rate: 0-30,000 mm/min Rapid traverse rate: 30,000 mm/min ACCURACY Position accuracy (scales): 0.01 Repeatability: 0.006 Resolution: 0.001 MOTOR Spindle motor: 7.5 Kw. AUTOMATIC TOOL CHANGER Nr. of tools: 18 Max. Ø (adjacent tools): 85 mm. Max. Ø (non-adjacent tools): 135 mm. Max tool length: 250 mm. Max. tool weight (1 tool): 6 Kg. Tool taper: ISO 7.388 / BT40 Pull stud bolt: ISO 7388-1 / 2-AJIS B 6.339 Pgedezlycyopfx Amyjp WEIGHT Aprox. Weight: 5,500 Kg.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm Pgodpfxjw S Efze Amyep y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Podpjtxni Nofx Amysgp Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Sheet thickness: 1 to 4 mm Width of band saw blades: 60 to 420 mm Psdpfx Aegxb Ebemyjgp Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm Pgjdsyq Sv Dspfx Amyop table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Pjdpfx Amowb Hygsyogp Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW Podjtvf Htepfx Amyogp - Operating voltage: 400 V - Weight: 3140 kg

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Pgodpfoh E Sghox Amyjp Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Pedpomftv Rofx Amysgp Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Pedpolz Rvlefx Amyegp Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!