Four-jaw chuck (2859)

KLOPFER

Condition: excellent (used), Eccentric chuck with key (28133) in sturdy wooden transport box make Klopfer Itsdpfx Ahegzlmws Nob type EZ 32 diameter 160 mm total diameter 265 mm height 180 mm KK receptacle size 5 cone diameter 82,575 mm bolt circle diameter 104,8 mm eccentric adjustment range 0 - 32 mm Mounting flange can be exchanged if required

Condition: good (used), Cup wheel - diameter: 175 mm Spindle projection: 180 mm Operating voltage: 400 V Machine weight approx.: 300 kg Itsdpfx Asc Skfbeh Nsb Space requirement approx.: 0.90 x 0.60 x 1,80 m

Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm Itodpfx Aeb A R Tnjh Njb -Speed: max. 4000 rpm -Weight: 12 kg

Condition: good (used), Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm Itedpfjwub Tzex Ah Neb -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW Itodpfjd Iin Tsx Ah Neb weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 165 mm -Passage: Ø 47 mm Iedjdxl Ngopfx Ah Njtb -Weight: 7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Klopfer, three-jaw chuck chuck size Ø 110 mm -Passage: Ø 26 mm -Bolt circle: Ø 95 mm -Dimensions: Ø110 x 70 mm -Weight: 3.0 kg Ijdpfswuchajx Ah Notb

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Itedeunruyopfx Ah Njb Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) steady rest face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: excellent (used), Eccentric chuck with key (28134) in a sturdy wooden transport box Brand Klopfer Type EZ 32 Diameter 160 mm Diameter 265 mm Itjdpfxegzlmzs Ah Nsb Height 180 mm KK holder size 5 Cone diameter 82.575 mm Bolt circle diameter 104.8 mm Eccentric adjustment range 0 - 32 mm with one set of drilling jaws with one set of turning jaws 41.5 kg weight with case 55 kg Hole flange can be replaced if necessary

Condition: ready for operation (used), Outer Ø: 165 mm Bore: 45 mm Total height: 85 mm Short taper mount: Itedsxb A Nnjpfx Ah Neb with 4 studs M 10

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm normal drilling capacity: 30 mm Itedsb Eli Hspfx Ah Njb Tapping capacity: M 20 drilling depth: 125 mm throat depth: 260 mm Distance spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm total height: 1.855 mm weight: 250 kg motor pole-changing: 0,8/1,5 kW Spindle speed infinitely variable range A: 80 - 1.440 min-1 range B: 180 - 3.200 min-1 Digital display for speed as standard.

Condition: used, Chuck outer Ø: 250 mm Bore: 75 mm Chuck body height: 83 mm incl. outward stepped jaws, chuck key, Ijdpfedan Afex Ah Netb inward stepped jaws are missing!

Condition: excellent (used), Outside Ø: 310 mm Iedpfx Aheg Hzaao Notb Bore: 105 mm Construction height without jaws: 110 mm Jaw height: 45 mm Reversible jaws

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Itedsd Hrhvjpfx Ah Njb Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: used, Outer Ø: 500 mm Bore: 95 mm Flange width: 103 mm Mounting, short taper: size 6 Itedpob Nzi Dsfx Ah Neb