Face plate

KLOPFER

Condition: excellent (used), Eccentric chuck with key (28134) in a sturdy wooden transport box Manufacturer: Klopfer Type: EZ 32 Diameter: 160 mm Knife length: 265 mm Height: 180 mm KK mounting size: 5 Taper diameter: 82.575 mm Bdedpfxsgzlmzj Apdji Pitch circle diameter: 104.8 mm Eccentric adjustment range: 0 - 32 mm includes a set of boring jaws includes a set of turning jaws Weight: 41.5 kg Weight with case: 55 kg The mounting flange can be replaced if required.

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. Bdsdsx Adbnopfx Apdji With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Manual Press KLOPFER Maxi travel: 400 mm Throat depth: 220 mm Thrust shaft diameter: Ø 50 mm Ideal for all types of shafts extraction, fitting works, etc. Width: 500 mm Depth: 500 mm Total height: 1000 mm Weight: approx 100 kg Bdodpfsz Iz Rzsx Apdsi

Condition: excellent (used), Four-jaw lathe chuck Bsdpfx Apjtuvnyedodi (2859) Make Klopfer diameter 300 mm Short taper size 6 Taper diameter 106.39 Pitch circle diameter for stud 133.4 mm Chuck height 110 mm

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Bdjdpfx Apezka H Aodsi

Condition: excellent (used), Eccentric chuck with key (28133) in a sturdy wooden transport box Manufacturer: Klopfer Type: EZ 32 Diameter: 160 mm Overall diameter: 265 mm Height: 180 mm KK mounting size: 5 Bjdegzlmwepfx Apdsdi Cone diameter: 82.575 mm Bolt circle diameter: 104.8 mm Eccentric adjustment range: 0 - 32 mm The mounting flange can be replaced if necessary.

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 165 mm -Passage: Ø 47 mm -Weight: 7 kg Bodpjdxl Ngjfx Apdodi

Condition: good (used), total length undivided: 3000 mm Bdjdpfshwwfxox Apdoi edge heigth: 90 x 90 mm

Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks Bjdpfx Aob A R Tnopdsdi -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Condition: excellent (used), Outside Ø: 310 mm Bdedpfxsg Hzaao Apdoi Bore: 105 mm Construction height without jaws: 110 mm Jaw height: 45 mm Reversible jaws

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Bodpfju Ngybjx Apdedi Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: ready for operation (used), Outer Ø: 165 mm Bore: 45 mm Total height: 85 mm Short taper mount: with 4 studs M 10 Bdedpfx Ajxb A Nnopdsi

Condition: used, Chuck outer diameter: 250 mm Bodpfodan Afox Apdodi Bore: 75 mm Chuck body height: 83 mm Includes jaws with an outward taper, chuck key. Jaws with an inward taper are missing!

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Bdodpfx Apoghtvaedei Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition