4 rolls hydraulic bending

KK-Industries HRB-4 3010

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS Bledpjq Nqkxefx Ab Ter MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread speed infinitely variable with foot remote control diameter from 300mm to 3500mm Blodpfx Abeifk Rbs Tor Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. Bledpfx Ajf Epznsb Ter It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Bljdpfx Aowk Nm Isb Tjr 10.000 rpm

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] - Z stroke : 445 [mm] TURRET 1 - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 105/400 [mm] - Y stroke : 120 [mm] - B Axis stroke : +90/-270 [°] Blodpfx Abju Hadhj Tor - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4.975 X 2.890 [mm] - Machine height : 2.050 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840C - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction Bodpfouc Shujx Ab Tslr electrics

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Year 2017 Bsdpfxerdg H He Ab Telr Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

Year of construction: 2015, condition: reconditioned (used), The Lamina GL2200 gluing machine is designed for manual and semi-automatic gluing of cardboard packaging and POS materials. In the gluing process, two types of dispersion adhesives can be used: hot and cold. The machine uses both hot and dispersion adhesives. The machine is designed for manual feeding of cut materials and materials with precision grooves. The adhesive system applies adhesive to a predetermined length and position as the material passes through the workpiece. The pressure roller system ensures a perfect grip. The equipment's maximum working width is 2200 mm, which allows gluing large-format products. Thanks to the multi-functionality of the settings, the materials being glued can have different thicknesses. Material: Cardboard, corrugated cardboard; Maximum width: 2200mm. Technology: Semi-automatic gluing machine; Material type: Cuts. We sell only our own equipment. Can be completed with WS 2220 Working Station The Lamina Working Station is an option for the Lamina Gluer. The product is fed through the Gluer that will Blsdpfjrb Aqpsx Ab Tjr apply the programmed glue lines and continue into the Working Station where it is positioned on the vacuum belts. The second piece is mounted and positioned by using side lays and pneumatic stops for high quality finishing. The unit is adjustable to suit a range of products from single to multi part displays, boxes, large back supports, shelves and many more. Maximum Sheet Size: Width: 2200 mm

Condition: excellent (used), Year of construction: 2008, Hello, Machine in very good condition. TM-SERVICE is a company specializing in the service and sale of poultry machinery. We install equipment anywhere, ensuring that the machines we sell are thoroughly inspected and ready for efficient operation. Bsdon Nykwspfx Ab Telr

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t WORKING AREA LONG: 5200mm WIDTH: 2300mm Bjdpfx Aefcnu Ieb Tjlr HEIGHT: 1000mm