3- roll sheet rolling machine with manual drive

KK-Industries CY 90-15/2.5 without motor

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top Bdodpfx Acev D H Sisnjg CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. Bsdpfxjtwb U Ae Acnjdg The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Bodpogiwl Dsfx Acnjdg Combined oscillating mortiser and drilling machine. Available immediately

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Bodpfsd Ab Tzox Acnjdg Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- We have many references!

Condition: ready for operation (used), functionality: fully functional, mileage: 28,911 km, first registration: 10/2003, fuel type: diesel, axle configuration: 8x4, fuel: diesel, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2003, ASTRA HD7/c 8445, year 2003, EURO3 emission standard, 28-meter boom, 100 mm delivery pipe, 60 m³/h pumping unit powered by a power take-off. Bodpfx Acozhgzbjnodg

Condition: new, sheet thickness: 3.3bending length: 1050upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending Bdedpfjd Ab T Dsx Acneg - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 274,-- - Hardened rolls EURO 480,-- We have many references!

Condition: used, Year of construction: 2001, Used Kuhlmeyer Long Belt Sander Model ZBS 2 Technical Specifications: Year of manufacture: 2001 Brand: Kuhlmeyer The machine is connected to power and can be inspected by appointment! Weight: 2,000 kg Bjdoy R Rlropfx Acnedg Connected voltage: 400 V Connected load: 4.5 kW Control voltage: 230 V Rated current: 12 A Frequency: 50 Hz Compressed air: 6 bar

Condition: used, mileage: 40,131 km, power: 316 kW (429.64 HP), first registration: 09/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special confirmation for heavy-duty/municipal operation i=2.53 Full brake assist, roll-away lock, emergency brake signal, acoustic reversing alarm, OBD-E, idle speed driving, free swing, straight trailing axle - steered and liftable, emergency steering pump, digital axle load indicator for air-sprung axles and trailers Driver's comfort seat with heating and armrest, multifunction steering wheel, Basic instrument cluster, Moon Grey, refrigerator, ASR, 7" navigation system, sound system, KSM module and FMS interface PTO gearbox-dependent (continuous operation + shiftable) Type NH/1c without flange, f=0.76, position approx. 2:30 o'clock Transmission shift blocking during power take-off operation Body weight basic version approx. 4400kg 14 lashing eyes + towing rings - tractive force 10000kg recessed in the outer frame, outer frame clad with aluminum checker plate over the entire length, 2 hydraulic drive-on ramps 2-piece - approx. 4350mm long - approx. 850mm wide, hydraulic cable winch approx. 6.3 t tractive force with radio remote control, 2x aluminum tool box, LED light bars Bdjdpfx Asu Rzmfjcneg

Condition: excellent (used), mileage: 786,169 km, power: 147 kW (199.86 HP), first registration: 07/1992, fuel type: diesel, wheelbase: 4,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, total length: 8,200 mm, Year of construction: 1992, = Additional options and accessories = - PTO Bdedpfoymrxwex Acneg = Remarks = WDB67703315752728 = More information = Empty weight: 11.680 kg Carrying capacity: 1.320 kg GVW: 13.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: 1ACO417 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: Bsdjyfwcrjpfx Acnodg - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation