Band Saw - Automatic - Horizontal

KASTO SBA 260 AU

Condition: good (used), Year of construction: 1998, total height: 1,700 mm, total length: 2,100 mm, total width: 2,260 mm, cutting range round steel at 90°: 260 mm, overall weight: 1,300 kg, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Gedjmxliwspfx Agbebg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Reeving 4/1 Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Gjdpfx Ajvx E Ncsgbsbg Flange width 300mm Available immediately in stock

Condition: used, Year of construction: 1994, cutting diameter 260 mm cutting width 400 mm Gsdpfx Aoxf I Uqsgbobg capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: used, Year of construction: 1995, cutting diameter 260 mm saw band length 3830 x 27 x 0,9 mm cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min Gbsdpfxowhqxmo Agbsg feed length 750 mm multiple feeding length 6750 mm height of material-table 700 mm weight of the machine ca. 1,4 t dimensions ca. 2100x2300x1720/1300 mm incl. several band saw blades incl. chip conveyor

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking Gbedpev Nxbysfx Agbjg There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Centers height : 175 [mm] - Distance between centers : 1000 [mm] LINEAR AXES - Grinding length : 500 [mm] - Travels X x Z : 267 X 650 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Continuous orientation : +/-8,5 [°] - External wheel dimensions : 500 x 80 x 203 [mm] - Grinding wheel holder headstock power : 7,5 [kW] - Cutting speed : 44 [m/s] PART HOLDER HEADSTOCK - Taper type : CM5 - Axis C : +/-0.5[°] - Power : 1 [kW] - Rotation speed : 30-1000 [Rpm] TAILSTOCK - Taper type : CM3 - Quill travel : 35 [mm] - Quill diameter : 50 [mm] - Max. part weight between centers : 130 [kg] ELECTRIC SUPPLY - Supply voltage : 400V 50 Hz - Machine dimensions : 2700 x 2350 x H. 2100 [mm] - Weight : 4 000 [kg] HOURS - Working hours : 17.775 [h] EQUIPMENT - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Electronic handwheel - SENSITRON - Dynamic balancing device : Hydrobalance HBA 40000-1 - Automatic length probe arm MOVOMATIC C25 - Automatic outer diameter probe arm in-process MOVOMATIC - Grinding wheel safety guard with automatic toppling - Fixed grinding device upon part-holder headstock - Coolant tank : 375 [l] Gjdpfxouhbyds Agbsbg - Paper filtering unit - Oil mist extractor - Wheel-holders flanges

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm Gsdpfx Aju Nc Emjgbjbg make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) Gbjdpfeh Rdwxox Agbeg - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm Gbodoq Evn Eopfx Agbeg - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: good (used), Year of construction: 2019, Machine has 1500 spindle hours DMG Mori CLX 350 V 4, year of manufacture 2019, control DMG Mori Slim Line / Siemens Shoptrun, travel X/Z 185/540 mm, Y-axis travel 80 mm, 12-position turret, live tooling, C axis, Godpfx Aexy Hyzsgbobg Tooleye tool measurement, three-jaw chuck KNCS 225/66, collet chuck, VDI 30 tool holder, high-pressure cooling 12 bar, tailstock, chip conveyor, prepared for bar feeder,