Sheet metal folder

Jorns Eco-Bend-125SW-SM-CNC50-6.4

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd Bcsdpexqh Sajfx Aafou 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Bcedpfx Aem Twnljafsu Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: - Pressure capacity 30 T. - max. sheet thickness 10 mm Bcjdpfx Aajlnkc Uofeu - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 3,450 kg, fuel type: diesel, tank capacity: 500 l, color: white, output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 270 kW (367.10 HP), continuous power: 250 kW (339.91 HP), total length: 3,650 mm, total width: 1,300 mm, total height: 1,850 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 250 (250kW - 270kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 250R SZR - Maximum power - 270 kW / 300 kVA - Rated power - 250 kW / 340 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - 6D10D315A-Turbo (British Series). Fuel Type - Diesel (Diesel) Combustion: - 47.0 liters per hour (at 75% of maximum power) - 34.0 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 9700 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳POWER: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 444D Rated power 400V - 250000 watts (250kW / 300kVA) 400V maximum power (up to 15 minutes) - 270000 Watt (270kW / 2340kVA) Rated 230V power - 83000 watts 230V maximum power (up to 15 minutes) - 90000 Watt Rated current (400V) - 360.0 A Current protection - C16, C32, main protection - 400A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Bcodpfxotp Tfwj Aafsu Fuel tank capacity - 500 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 130 x 365 x 185 cm Gross weight - 3450 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 140Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. We select suppliers of components for our units meticulously, making sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: excellent (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, machine/vehicle number: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but was not put into production. It has operated for 50 hours. It is designed for the forming of cold-rolled sections, either open or closed, which are laser-welded. The input material for profile production consists of coils made of black or galvanized steel. Component parts (serial numbers in accordance with technical documentation): 1 - Soprem H1250/D/1700ZR decoiler, serial no.: 20140388/1, year of manufacture: 2014 2 - Soprem CH-2540 strip end welder, serial no.: 20140388/2, year of manufacture: 2014 3 - Dreistern RS616 multi-roll forming machine, serial no.: 15773, year of manufacture: 2015 - base frame, serial no.: N/A, year of manufacture: N/A Bedexz Tuujpfx Aafjcu - P60/80/90 gearbox unit, serial no.: N/A, year of manufacture: N/A - servo drive, serial no.: N/A, year of manufacture: N/A - Dreistern P60 forming, embossing, and perforating stands, serial no.: N/A, year of manufacture: N/A 3 x Dreistern RC1500, RC1501, RC1502 roll forming tools, serial no.: N/A, year of manufacture: N/A 4 - Trumpf TruLaser Cell 1100 laser, serial no.: S1200C0090, year of manufacture: 2014 5 - Dreistern TS214.10 cut-off machine, serial no.: 15122, year of manufacture: 2015 - Dreistern S 200.10 circular saw, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system

Condition: like new (used), Year of construction: 2021, Motorized folding machine Fab. Hezinger/Erbend Typ. MFA 3200x3mm Year 2021 Technical data Make Hezinger / Erbend Type HF MFA 3200 x 3 Year of construction 2021 Effective length 3200 mm Bcsdpsub R Spefx Aafeu Capacity 3.0 mm Air pressure 6 bar Upper beam stroke: 250 mm Motor 20.2 KW Weight 8.0 t Equipment - Rotating upper beam with 2 tools - Bending beam swivel range 0 - 135 - Motorized folding beam lowering 80 mm - Manual crowning of the folding beam - Backgauge 6 -1,300 mm with supports and ball rollers - ErFold control system - Safety foot switch with 3 pedals - Light grid for front protection - LED status display - Tools: Pointing rail upper beam 30° R=1.0 mm Three bending beam rails: 15, 25, 35 mm Split goat foot with height 120 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: like new (used), Year of construction: 2003, Pivatic Automatic Line - Pivatic 800mm coil width uncoiler with sheet straightener and roller feeder- hydraulic Type: SMTCL 800 T5 Year of construction: 2003 Bcodpfx Aajtp Ta Esfou - Pivatic hydraulic punching machine Type: PCC80 TTI Year built: 2003 Max pressure punching machine equipment: - two tool blocks AXIS Z1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). AXIS Y1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). -guillotine - unloading conveyor (conveyor belt) with additional moving table for sorting workpieces - unloading conveyor (conveyor belt) -control panel (SIMENS) - Hydraulic longitudinal bending module with working range of 1750mm Pivatic Type: FLN 175 Year of construction: 2003 Bending line equipment: -gripper feeder AXIS X1 - rotary table with a diameter of 750mm -EIA W1 longitudinal bending with a length of 1750mm -gripper feeder AXE A1 -gripper feeder AXIS B1 -AXIS Q1 longitudinal bending with length 1750mm - gripper feeder AXIS X1 - unloading conveyor -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -transport of workpieces is carried out on brush tables -Hydraulic transverse bending module with a working range of 800mm Pivatic TYPE: FSW 80 Year of construction: 2014 Bending line equipment: -loading conveyor (belt conveyor). -OŚ A2 transverse bending with a length of 800mm -OŚ B2 transverse bending with a length of 800mm - unloading conveyor (belt conveyor) -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -the whole line is equipped with a safety system (light curtains SICK) - cooling system Highly efficient device. Greetings,

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping Bcodpfoq A Tw Rsx Aafju • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: used, functionality: fully functional, Year of construction: 2003, FLEXIbend RAS 73.30 - General technical data in mm: Bending length: 3200 mm Maximum sheet thickness (400 N/mm²): 3.0 mm Maximum upper beam stroke: 300 mm Backgauge system (U gauge): 10-1550 mm Optional extension: (-3050) Machine dimensions (largest possible option): 4360 x 5220 mm Basic machine weight: 4400 kg - Machine-specific data: Motorized operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2003 Condition: Refurbished – very good used condition Complete tool set, with specific max. sheet thickness 2-person operation from the front Second foot switch for operation from the rear (incl. light barrier for working from behind) 15" CNC color graphic touchscreen control panel Touch&More Bedsx Hx Sljpfx Aafscu CNC rear gauge and support system (10-1550) Backgauge system (standard): 10-1550 mm - Sample images -

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - New images available: Listing images 1 to 3 are current pictures Listing images 4 to 5 are reference images of the machine’s configuration regarding table type - General technical data in mm: Bending length: 3200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tons Backgauge system (U-gauge): 10–4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Bjdox Hf E Eepfx Aafjcu Backgauge + U-shape weight: approx. 1205 kg - Machine-related data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person operation from the front Second footswitch for operation from the rear (including light barrier for rear operation) 15" CNC color graphic touchscreen controller (Touch&More) CNC backgauge and hold-up system (10–1550) Backgauge system (U-gauge): 10–4050 mm