Hydraulic horizontal miter band saw automatic

JAESPA Concept 251 GA

Condition: new, Year of construction: 2025, roller diameter: 140 mm, roller length: 1,570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller Podpfx Ahjgg Nv Ijvsgi - Brake motor - Emergency stop - Documentation - 400V

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm Psdpfjhzbipjx Ahvjgi - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Pgjdof Sqckepfx Ahvji

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm Pgodpfex Irx Isx Ahvji +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine Pgodpexta N Aofx Ahvji - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Pgodpfxsh Nm Ncs Ahvsi Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours. Pjdsd Izmaopfx Ahvegi

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg Podpeftdh Iefx Ahvsgi The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: ready for operation (used), Year of construction: 2025, This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining Pjdsx D Dnqopfx Ahvjgi

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos Pgjdpfxotlzdqj Ahvei -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit