Combined machine

HAMMER C3 31

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Compact combination machine with 5 functions: sawing, milling, surfacing, thickness planing, and long-hole drilling. Sliding table, 800 mm; max. saw blade 315/100 mm cutting height; milling cutter, 3 speeds; surfacing and thickness planing, 310 mm; long-hole drilling support; year of manufacture 2002; 3 kW motors; mobile base. Dkjdpfx Aaoziz E Rohsp

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 Djdpfx Aaoudi Unehekp 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, input voltage: 400 V, Spot welding machine / table-top spot welding machine - current model, manufactured in 2025 - new machine Control unit TE 101 with digital display of the welding current Rated power 20 kVA / 50% duty cycle Mains connection 400 V Short-circuit current 19 kA Welding current 15.2 kA Fuse rating 63 A Supply cable / phase 25 sq mm Electrode force 187 daN at 6 bar Overhang 160 mm Electrode cone MK1 Weight 81 kg - 2-stage foot switch - Main switch - Pneumatic maintenance unit with filter Dodpfx Aoh Nu A Njahekp - Machine is our demonstration model - Machine can be demonstrated in Dresden by prior arrangement and appointment

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Dkodpfsx H Ud Rox Aahjp Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: used, Planer-thicknesser STÖ310V, very good condition, 2.2 kW, 1800 mm table length, 310 mm table width, 4 knives, 300 kg Dkjdpfx Aaex H Uc Tshsp Price changes reserved, errors and typographical mistakes excepted.

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Table length 198 cm Table width 41 cm Dsdpoul Utmjfx Aahekp

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Djdpfx Aaeittnzohjkp Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: used, 5-function combination Hinkl, 410 mm, in good condition, 2.2 kW, 1550 mm, 410 mm table width, 2 knives, approx. 500 kg. Price changes and errors excepted, subject to printing and typographical errors. Dkodpfxjx H Ucye Aahop

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator Dkodpfx Aaoxbnyrshop CE certified DTR technical documentation Year of manufacture: 2005

Condition: used, engine 3 KW cutting width tba mm roller table nein ja/nein Three-function combined table saw, slot drilling, and milling machine Kirchner Leipzig. Without milling arbor. Dedpfxjwzbcve Aahskp