Underfloor coil carriage 30 t

ITALCOILS

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm coil weight: max. 30 t Dsdpfxelimrxe Abweck stroke: 1.000 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Dcjdpfjv Ipvxox Abwjk

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Dcjdpfjd Hurbjx Abwek Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Year of construction: 2016, condition: ready for operation (used), Absorption Refrigerator System with cooling tower Karlsruhe KRD 1/12-28-3. Cooling output: 214kW, permissible temperature: 10-60°C, max. overpressure: 1bar, nominal volume flow: 87.1m³/h, with Radial Fan Wolter GmbH TRZ 900/80 KTK and Absorption Chiller Carrier SCS 16LJ-03E-LC. Dcjdpfx Asn Tpmqsbwsk

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Heavy-duty transport trolley for weights up to 35 tons. The transporter is supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (--> in any desired direction). The drive wheels are pneumatically pressed onto the ground to achieve optimal traction. By rotating the two drive wheels, the various drive modes of the transporter are activated. This creates a very flexible transporter that can move longitudinally, laterally, and rotate on the spot. The transporter integrates a 35-ton lifting table, the contact surfaces of which are equipped with heat sinks to dissipate the heat emitted by the pallet (during the transport of warm/hot material). The lifting system is driven by a central motor, and the power transmission takes place via two gearboxes and axles that run through the frame. These axles drive 4 shafts at the corners of the transporter. Depending on the transport goods, a device can be constructed that is supported by the lifting system. The entire system is protected by aluminum covers, each of which is numbered so that it can be easily reattached in the correct position after maintenance. The transporters are designed to move a maximum load of 35 tons with a maximum speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed can be adjusted continuously via the manual control with joysticks. Without a load and in manual mode, the transporter can reach 2.5 km/h; in semi-automatic mode, the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Operation: Radio remote control Dcodpfxsxa Ends Abwek Drive: Battery-powered Dimensions approx. 3600 x 2500 x 800 mm

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total Dcodpfx Astpkv Ajbwok

Year of construction: 1999, condition: used, CAPACITY 2000kgr Dodpfx Abewa I Ucjweck ARM LENGTH 5M HEIGHT 4.6M

Year of construction: 1990, condition: good (used), coil weight: max. 15 t coil OD: max. 1.800 mm Djdpfx Aebibu Tsbweck

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm Dsdpfx Asr R Abpobwock -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Year of construction: 2006, condition: excellent (used), 1. CestraLOOS 800 l, 0.1 bar 2. Flowserve Cestra Power – 400 kW Dcjdpfx Asfm Rumobwok Capacity – 15 l Year of manufacture: 2006 3. Cestra Year of manufacture: 1997 Power – 400 kW Capacity – 18 l 4. Cestra condensate collection tank Year of manufacture: 1996 Capacity: 250 l