Induction System

INDUCTION IHFTL 75K 15

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,853 h, functionality: fully functional, machine/vehicle number: 11170000963, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous Speed 18000 Tool changer 60 pieces / SK 40 DIN69871 Tools included in the price Hjdpfswqp Huex Ahvofd ICS / air blast Heidenhain 426/430

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle Hsdpfx Askvpnmshvefd automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,600 mm, Travel paths X-axis travel: 3500 mm Y-axis travel: 2500 mm Z-axis travel: 1600 mm Worktable NC rotary table: 2200 x 1800 mm Max. table load: 12,000 kg Max. spindle speed: 2,500 rpm Hfodpsyifpfofx Ahvjd Tool holder ISO-50 Accessories: - Chip conveyor

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Hedpsvby U Sofx Ahvjfd Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Hsdpfx Ahsmdn Dxsvsfd

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, total height: 245 mm, total length: 211 mm, total width: 212 mm, spindle speed (max.): 5,000 rpm, feed length X-axis: 650 mm, feed length Y-axis: 350 mm, feed length Z-axis: 720 mm, grinding wheel diameter: 250 mm, overall weight: 5,000 kg, Machine has only run with oil cooling, machine is equipped with dressing roller, measuring probe, pneumatic workpiece clamping, -- New linear guides and control conversion in 2014 Hfedeug H R Sepfx Ahvjd

Condition: good (used), Year of construction: 2012, arm reach: 2,696 mm, controller model: KR C4, KUKA Robots Model: KR 90 R2700 pro Technical data Maximum reach: 2696 mm Rated payload: 90 kg Rated supplementary load, rotating column / link arm / arm: 0 kg / 0 kg / 50 kg Rated total load: 140 kg Pose repeatability (ISO 9283): -/+ 0,06mm Number of axes: 6 Mounting position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1058 kg Axis data Motion range A1: -/+ 185 ° A2: -140 / -5 ° A3: -120 / 155 ° A4: -/+ 350 ° A5: -/+ 125 ° A6: -/+ 350 ° Speed with rated payload A1: 136 ° / s A2: 130 °/ s A3: 120 ° / s A4: 292 ° / s A5: 258 ° / s A6: 284 ° / s Hfedpfotpwxlex Ahvod Operating conditions Ambient temperature during operation: 10 °C bis 55 °C (283 K bis 328 K) Controller: KR C4

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h max. 5232 m²/h Sweeper - scrubber dryer Operating hours: approx. 400 hours Hjdpfx Aeg Ti Ihehvsfd incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Hsdsgpxc Sspfx Ahvofd Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Year of construction: 2009, operating hours: 500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Hedpfx Aoh Tyyhehvofd Base carrier: Sennebogen BS 80 R Under carriage: BAUER UW 95 R Engine: CAT C 18 with 570 kW (no AdBlue nocessary) Available applications: Kelly rotary head KDK 235 S / double head rotary DKS 100/ 200 -02 / Vibrator MR 125 V This machine got only 500 running hours and is like NEW !!!